Cisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?

Apr 9, 2013

What is the difference between IP Base and Universal for 3750X switches?

View 2 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 3750X / IP Base And IP Services Stackable Switches?

Aug 16, 2012

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?  

View 5 Replies View Related

Cisco Switching/Routing :: 3750X Building IP Base And Services Stackable Switches

Jul 30, 2011

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?

View 1 Replies View Related

Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking

May 6, 2012

I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..

View 4 Replies View Related

Cisco Switching/Routing :: 4900M Downgrade IOS From Universal 15.x To Non-Universal 12.x

Aug 14, 2012

Is it possible to downgrade the 4900M IOS image from Universal 15.x image to non-Universal (possibly IP BASE) 12.x image.

View 1 Replies View Related

Cisco Switching/Routing :: 3750X IP Base IOS Feature Set?

Oct 26, 2011

I have been looking to find out the list of features that the IP Base IOS has for the 3750X series switch.  What would be ideal is a comparable list but essentially I need to know which of the LAN Base/IP Base/IP Services has SSH functionality. 

View 1 Replies View Related

Cisco Switching/Routing :: 3750x 12.2-55.SE3 IP Base Feature Set?

Sep 9, 2012

Full feature set for IP Base with the 3750x.I just wanted to verify that I could create a routed port, turn ip routing on, and create static routes as well as a default route. From what I can find, there shouldn't be a problem with this on the IP Base Feature Set, I just wanted to verify. Or any link for the Features of IP Base on the 3750x.

View 3 Replies View Related

Cisco Switching/Routing :: IP Base To IP Service License Of 3750x

Dec 8, 2012

I am having a ws-3750x-12s-s  switch . I want to upgrade it from ipbase to ip service. after installing ip service liciense file, when i gave command " show license detail" i found there 3 index . one is for ip base -active (permanent) ..2nd is for ip service-active(permanent) 3rd  is again ip service but inactive( period 8weeks 2days) , then i cleared 1st one by giving command "clear ipbase" and reboot. but still 2 index .both for ipservice one is permanent-active another is inactive . so my question is how can i remove 2nd index which one is inactive and time period for 8weeks and 2days..?? becasue i don't need it. and it will make any problem in future ?

View 2 Replies View Related

Cisco Switching/Routing :: 3750X Static Routing When Running LAN Base?

Dec 27, 2012

I have a stack of 2 x 3750X switches these are running 12.2(55)SE5. I needed to add some static IP routes and found that the ‘ip routing’ command is not supported. I came across a document that stated “On switches running the LAN base feature, static routing on VLANs is supported only with Cisco IOS Release 12.2(58)SE and later.” So I have upgraded to 12.2(58)SE2, but ‘ip routing’ is still not a valid command.
 
The release notes state:“On the Cisco Catalyst 3560-X and 3750-X Series, it adds support for 16 static IPv4 routes in the LAN Base image.”
 
I have read other posts that talk about running the ‘sdm prefer routing’ command which I have done, but I am still unable to add any routes or run the ‘ip routing’ command.

View 4 Replies View Related

Cisco Switching/Routing :: 3750X 12-SFP IP Base - Upgrade To IP Services Image

Jan 23, 2013

How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 3750X OSPF Support In IP Base Image?

Apr 3, 2011

I'm trying to work out if I need to order the "IP services" image for a couple of C3750-X.  I need to run OSPF on these switches, but find the IOS image requirements on Cisco contradict.
 
At the top of the data sheet it says: • Open Shortest Path First (OSPF) in IP Base image

On the product info page it says: IP Base: Enterprise Access Layer 3 Switching, including OSPF (Open Shortest Path First) for routed access 
 
But in lots of other places it says you need 'IP services' for OSPF.
  
As the IP services IOS is quite a bit more expensive I would like to avoid buying it. What image do I need to run OSPF?

View 6 Replies View Related

Cisco Switching/Routing :: Difference Between Stack 3750G And 3750X?

Jul 15, 2012

I have a cisco WS-C3750G-24TS with IOS flash :/ c3750-mz.122-ipservicesk9-25.SEB4.bin "
 
I purchased a new Cisco WS-C3750X-24 with the IOS flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin. ( NEW )
  
When i configured a stack between the two 3750,  the new switch restarted due the version mismatch (different IOS´s);
 
 We have two versions: 
 
WS-C3750G-24TS-ipservicesk9 flash :/ c3750-mz.122-25.SEB4.bin "
  
VS
 
WS-C3750X-24 flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.
  
Is that possible to configure a stack between then?
 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Tenho  um cisco WS-C3750G-24TS com o IOS flash:/c3750-ipservicesk9-mz.1
22-25.SEB4.bin"
Adquiri  um novo cisco WS-C3750X-24 com o IOS flash:/c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.

[code]...

View 4 Replies View Related

Cisco :: Difference Between Lite Entry And Base 2960 Switches

Jul 1, 2012

Thinking of getting one of those 8-port 2960 for a CCNP study. Is the difference between the C2960-8TC-S and the C2960-8TC-L models in Hardware, or in IOS? or both? And if it's in IOS, is the S upgradable to L?

View 7 Replies View Related

Cisco Switching/Routing :: LAN Base Software For 2960 Lite Switches?

Feb 6, 2012

We ordered 4x cisco 2960 switch with LAN Lite software by mistake. Can we upgrade them to Lan Base?When I change boot image I get Error: hardware not supported by firmware.

View 3 Replies View Related

Cisco Switching/Routing :: 3560x - Lan Base 4900M Can Take Load Of 18 Access Switches

Feb 6, 2012

We are using 18 numbers of 3560X -Lan base series switches in our network(Access layer). We have 400 users and created vlans in access  switches. we are planning to purchase Two numbers of 4900 M as Core layer switch and for redundancy. The uplink would be on 10 gig copper cable (CAT 7) between the access layer switches and core switches. I like to know whether 4900M can take the load of 18 access switches.

View 1 Replies View Related

Cisco Switching/Routing :: Feature Set LAN Base / Lite (2960) And LAN / IP Base (3650X)?

Mar 28, 2012

1)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:

LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
 
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?

View 2 Replies View Related

Cisco Switching/Routing :: 2960 Switch LAN Base To IP Base

Nov 14, 2011

can we upgrade 2960 switch  from Lanbase IOS to IPbase

View 4 Replies View Related

Cisco Switching/Routing :: 3750x Implementing Macsec Between Two Switches

Aug 19, 2012

Can I implement MACsec betwen two Cisoc 3750X using the  C3KX-NM-1G? 3750x (C3KX-NM-1G) -------------------MMF------------------(C3KX-NM-1G) 3750x.

View 1 Replies View Related

Cisco Switching/Routing :: ASA And 3750x Switches - How To Get VLans Working

Jan 25, 2012

How to get vlans working properly between sub-interfaces on a ASA and a trunk port on a switch.There seems to be issue with the VLAN's being assigned to the correct VLAN and this information being properly sent to the ASA over the trunk.
 
We seem to be unable to ping most of the interfaces except for one on the switch. Sometimes if we are lucky we are able to ping a host on a different vlan that is on the switch. This seems sparadic at best.
 
Logs on the ASA show traffic does not seem to be assigned properly to the correct sub interface. We have access rules on the ASA disallowing traffic not part of the same vlan. For example you will see networkA blocked on networkB when it really should be directed through networkA's sub interface.
 
Any example commands for the ASA and Switch for at least the basic requirements to enable all the VLAN's to communicate properly with the ASA?

View 5 Replies View Related

Cisco Switching/Routing :: 3750X Setting Up Power Stacking Switches

Dec 27, 2012

I'm trying to get some clarity on power stacking 3750X switches. I have a new stack of 6 switches. I know I can only have 4 in a power stack and all 6 in the data stack with a max of 8. I'm trying to find the proper way to connect the power stack cables for the 4 switch power stack.

View 1 Replies View Related

Cisco Switching/Routing :: Possible To Do LACP Using 2 X 10GB Between 3750X / 2960S Switches

Sep 4, 2012

I need to know if is possible to do a LACP using  2 x 10GB between 3750X and 2960S (WS-C2960S-48LPD-L) switches.

View 1 Replies View Related

Cisco Switching/Routing :: 3750x Stacked Switches With Latest Firmware

Feb 25, 2013

I have two 3750x stacked switches , both with the latest firmware on them. I enter the configuration onto one switch and it obviously copies over onto the other switch. Although in the configuration I have both a console username and password and an enable password, when I try to log onto the initial switch that I entered the configuration on, I am prompted for a username and password, which works fine, but when I try to enter enable mode i get an error stating that no password has been set. However when logging onto the other switch I am not prompted for a username or password but when I try to enter enable mode I am prompted for a password and can access it with no problems.

View 1 Replies View Related

Cisco Switching/Routing :: Stacking 24 And 48 Port 3750X Switches Not Working?

Dec 11, 2012

We purchased a number of 3750X 48 and 24 port switches for the College Campus. Am finally getting around to getting them inserted on the network. Working with a WS-3750X-48PF-S and a WS-3750X-24P-L. Have them stacked with the 10Gb uplink on the 48 port switch. Have not been having fun.In the boot sequence, the switches recognize they are stacked, but as soon as they finish boot, I get the message on the 48 port switch: “Stack Port 1 Switch 1 has changed to state down.” Then “Stack Port 2 Switch1 has changed to state down.” Am noticing that I have a message preceding that: “Major version mismatch with stack neighbor.”The 48 port is running c3750e-universalk9-mz.150-1.SE3, HBOOT 12.2(53r)SE2.The 24 port is running c3750e-unversalk9-mz.122-55.SE3, HBOOT 12.2(53r)SE2Most of our 3750X and older switches are running 122-55 or 122.58 code. IP base or Universal. There is speculation that the problem is the 24 Port is Lan base, as the part number might indicate. (WS-C3750X-24-P-L.... I think that is the part number) and the 48 is IP base. Both switches are Universal, and my understanding is that they don't care about LAN or IP Base until you enable a function that falls in the IP Base domain. Then I have to call Cisco Licensing.For these switches, LAN Base is fine, based on the boot message, I feel the real problem is 122-55 versus 150-1 in the stack. So.. the question is: Do I downgrade the 48 port to match what we have in our environment, and what is on the 24 port switch. Or... Upgrade the 24 port switch to match the 48 port switch and have an installation that is not consistent with our environment? I do have two more edge closets to install with this purchase of 3750X 48 port switches.

View 2 Replies View Related

Cisco Switching/Routing :: 3750X - 48PS Switches Power Stacking

Mar 28, 2012

In my office we bought 7 cisco 3750X - 48PS switches. We configured Data Stacking between those switches. We also want to configure Power Stacking between those 7 devices.
 
I found in the Data Sheet that we can only configure 4 devices in power stacking at a time. If it is like that how to configure the rest of 3 devices. Need configuring power stacking between those devices in a better way..

power stack cable part no we have is
CAB-SPWR-30CM

View 2 Replies View Related

Cisco Switching/Routing :: Difference Between Nexus And Usual Catalyst 3750 Switches

May 26, 2013

what is the difference between Cisco Nexus switches and the usual catalyst 3750 switches.I do understand the operating system in both these are different.
 
When will we suggest using Cisco nexus instead of usual Cisco switches? Also what interface does Cisco nexus like 5548 come with , is it both copper and fiber?

View 3 Replies View Related

Cisco Switching/Routing :: 3750x / Stackpower Switches Show In Standalone Mode?

May 29, 2013

I have a stack of 8 3750x switches connected via Stackwise.  In addition, I have these switches configured as two Powerstacks. When I look at the Powerstacks, they are showing as being in power-sharing mode.  When I look at the individual switches, they show as standalone.   Right now, I have 1 switch in each powerstack that has two power supplies, and then the other three have a single power supply. Below is the output for "Show stack-power detail" as well as the Powerstack configurations.
 
Power Stack           Stack   Stack    Total   Rsvd    Alloc   Unused  Num  NumName                  Mode    Topolgy  Pwr(W)  Pwr(W)  Pwr(W)  Pwr(W)  SW   PS--------------------  ------  -------  ------  ------  ------  ------  ---  ---Powerstack_1          SP-PS   Ring     2145    45      570     1530    3    3Powerstack_2          SP-PS   Ring     2860    60      760     2040    4    4Powerstack_1-1        SP-PS   Stndaln  1430    520     190     720     1    2
Power stack name: Powerstack_1    Stack mode: Power sharing    Stack topology: Ring    Switch 4:        Power budget: 700        Power allocated: 190        Low port priority value: 20        High port

[code].....

View 1 Replies View Related

Cisco Switching/Routing :: 3750X Switches Dropping Packets On Uplink Interface?

May 9, 2013

We have a remote site that is using 3750X switches as layer 2 switches back to our home site.  The uplink port is showing dropped packets but the utilization on the link is never about 10%.  We have a 100Mb circuit to this site.  Our speed tests and iperf tests are not showing any issues that we can see.  However the port is still droping packets.  It is not dropping at a high rate but they are dropping.          
  
switch#sh platform port-asic stats drop gi1/1/4
  Interface Gi1/1/4 TxQueue Drop Statistics    Queue 0      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 1      Weight 0 Frames 52876      Weight 1 Frames 2      Weight 2 Frames 0    Queue 2      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 3      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 1330874    Queue 4      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 5      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 6      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 7      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0switch#
         
Is there a way to capture these dropped packets to see what they are?  We do have VOIP phones at the site and are using Qos.

View 5 Replies View Related

Cisco Switching/Routing :: 3750x Switches / 32 Loop Back Responding As A Broadcast?

Jun 7, 2012

I have a bunch of 3750x switches that each have a 10 gig routed link back to a central 4507 (loopback = 172.30.255.255).We carved up a /24 (of course, the /24 doesn't really exist except in our address tracking spreadsheet) into a bunch of /30's for routed WAN links and /32's for loopback addresses.We started on the low end for /30 subnets (ie 172.30.255.0/30, 172.30.255.4/30, etc.).We started at the high end for the /32 loopbacks (ie 172.30.255.255/32, 172.30.255.254/32, etc.)
 
Well, when I try pinging 172.30.255.255 from the access layer 3750x switches, the 3750x seems to be treating it as a broadcast ping where it lists each member that responds instead of the regular !!!!! response (this makes think something is odd with the 3750x).  Of course, only one member responds (the core).  But even the core seems to respond with the other end of the /30 instead of the actual /32 loopback (which makes me think something is odd in the core).  I could have sworn that I've setup similar topologies without problems (ie, using 10.0.0.0/32, 10.255.255.255/32, etc as loopbacks) and as long as the mask is a /32, it should work.Also, I can ping/ssh to that loopback if my laptop is on a directly connected subnet.  But I can't do it from any of the 3750x switches (which are also directly connected).I've double checked for overlapping subnets, but nope.  I don't see any.  Routing looks fine.  The actual /32 is being propagated everywhere properly.

View 3 Replies View Related

Cisco Switching/Routing :: What Are Options Available To Add Cat3560 G Switch To Stack Of 3750x Switches

Sep 8, 2012

What are the options avilable to add a cat3560 g switch  to a stack of 3750x switches.?is there a connector avilable ?or is it possible to trunk via fiber ? cat 3560 has 4 sfps and 224 10/100/1000 ports with poe. cat 3750 stack has a 10 gb up link . What are the possible options?

View 6 Replies View Related

Cisco Switching/Routing :: 4503E Universal Crypto Image?

Apr 25, 2013

find what feature set is supported on this IOS S45EUK9-33-1511SG The client requires Layer 3 functionality so do i need to apply any license with it or it will perform  layer 3 routing (like rip, ospf, bgp, ipv6, ospfv3) ?

View 1 Replies View Related

Cisco Switching/Routing :: Can 2911 Router Work On IOS Other Than Universal Image

Jun 10, 2012

whether a Cisco Router 2911 would work on images other than universal image. This is the question raised by one of our customer. He has 2811 Router where-in he has configured T1/E1 configuration, terminated to Zyxel Modem and working fine. Now he wants to replace this 2811 router with 2911 router. Since the universal image in 2911 router is not working with the present configuration in 2811 router, he wants to know, what options are there for him to configure this in 2911.

View 2 Replies View Related

Difference Between 10Base-T And 10 Base-Tx?

Jul 28, 2011

what iz the difference between 10Base-T and 10 Base-Tx?

View 1 Replies View Related

Cisco WAN :: Difference Between Ip Base And Ipservices For ASR1001?

Jul 29, 2011

Any document to explain the differences in the Software images for the ASR1001 routers.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved