Cisco WAN :: Difference Between Ip Base And Ipservices For ASR1001?
Jul 29, 2011Any document to explain the differences in the Software images for the ASR1001 routers.
View 3 Replies
ADVERTISEMENT
Difference Between 10Base-T And 10 Base-Tx?
Jul 28, 2011what iz the difference between 10Base-T and 10 Base-Tx?
View 1 Replies View RelatedCisco :: Difference Between Lite Entry And Base 2960 Switches
Jul 1, 2012Thinking of getting one of those 8-port 2960 for a CCNP study. Is the difference between the C2960-8TC-S and the C2960-8TC-L models in Hardware, or in IOS? or both? And if it's in IOS, is the S upgradable to L?
View 7 Replies View RelatedCisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?
Apr 9, 2013What is the difference between IP Base and Universal for 3750X switches?
View 2 Replies View RelatedCisco Switching/Routing :: IPservices Vs IPbase On 6509-E
Jan 14, 2013Upgrading two 6509-E routers containing sup32's to two new 6509-E routers containing sup2T's. We run a large OSPF network but our core mainly is a switched network and only has about 5 Vlans. Now this could change in the future and there maybe more Vlans on it.
Just after realising our new sup32's shiped with ipbase instead of ipservices. Version is s2t54-IPBASEK9_NPE-M. My question is is this version ok for routing?
Our old current 6509's are version s32p3-ipbasek9-mz.122-18.ZYA3.bin and they do some routing about the same amount these new routers will do. Here is a summary of the routing table:
IP routing table name is Default-IP-Routing-Table(0)
Route Source Networks Subnets Overhead Memory (bytes)
connected 1 3 424 640
static 0 0 0 0
ospf 1 26 348 27520 59840
Intra-area: 366 Inter-area: 0 External-1: 0 External-2: 8
NSSA External-1: 0 NSSA External-2: 0
internal 12 14160
Total 39 351 27944 74640
Removing Queue Size 0
Will I need to upgrade the new sup2T's to ipservices or will this version work ok?
Cisco Switching/Routing :: 3750x With IPServices RTSP Configuration?
Dec 10, 2012I have a requirement whereby a CCTV system is being installed that will need multicast RTSP configured on the switch network. How this will be achievable on 3750X IP Services switches? if this is not possible then what switch hardware will be needed?
View 2 Replies View RelatedCisco Switching/Routing :: Feature Set LAN Base / Lite (2960) And LAN / IP Base (3650X)?
Mar 28, 20121)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:
LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?
Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking
May 6, 2012I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..
View 4 Replies View RelatedCisco Switching/Routing :: 2960 Switch LAN Base To IP Base
Nov 14, 2011can we upgrade 2960 switch from Lanbase IOS to IPbase
View 4 Replies View RelatedCisco WAN :: QoS On ASR1001 Router?
Apr 28, 2013i need to know if the built-in GE ports in ASR1001 or ASR 1002 (-X) have the features of QoS without restrictions, or QoS features are supported in SPA modlue ports only?
View 2 Replies View RelatedCisco WAN :: ASR1001 / L2 Over L3 With Load-balancing?
Nov 30, 2011i'm trying to accomplish the following:I want to trasport a bunch of vlan layer 2 etherchannel on a pair of layer3 connections, using L3 to load balance.i was considering a pair of options:
1) bridging + gre (non applicable since i cant bridge 2 interface beloging to a etherchannel to a tunnel)
2) L2TP is it possible to accomplish this with the above tecnology? any reference, configuration example?
3) AoMLPS is it possible to accomplish this with the above tecnology ? any reference, configuration example?
I cant modify topology, the routers used are ASR1001 It is mandatory that both sites have a layer2 connection between them.
Cisco :: ASR1001 - Hardware Is Not Recognized
Jan 24, 2012I noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
Cisco WAN :: ASR1001 Licenses Information Required
Jan 29, 2011We are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View RelatedCisco WAN :: ASR1001 - Internet Load Balancing
Feb 3, 2013I want to load balance my Internet traffic between two ASR 1001 routers that are connected to our core switches. Both routers are connected to the same ISP (Comcast) going to the same BGP AS on different /30 subnets. Is there a way for me to load balance my Internet traffic using both connections with BGP rather than having one of these connections sitting idle? If not, the only solution I see is to configure my layer 3 devices to split internet traffic between both routers (i.e. default routes with same AD).
View 6 Replies View RelatedCisco WAN :: ASR1001 / What Is An Integrated Daughter Card
Oct 1, 2012I was doing some research on the Cisco ASR1001 model Router and within the description on the official Cisco page it mentions having various models that come with an "Integrated Daughter Card" or "IDC". I was curious as to what the IDC is exactly, considering there is an ASR1001 model without it.
View 2 Replies View RelatedCisco WAN :: ASR1001 / Use Bandwidth Of VAI In QoS Parent Policy?
Jan 3, 2013I've done a similar solution before where I put bandwidth inherit on the Dialer interface of the CPE and it inherited the ATM interface speed (the upload sync rate) and prevented the CPE from maxing out and hitting hardware queuing in the DSLAM. I can't seem to find a way to do this downstream from our ASR1K to the customer though.
Platform is ASR1001 with IOS 3.7.2 or 15.2(4)S
Problem description:We have many xDSL users (ADSL2+ and VDSL2). They all sync at different speeds depending on how far they are from the DSLAM.
Example:
Customer A might be connected at 40000kbps/10000kbps (VDSL2)
Customer B might be connected at 5000kbps/600kbps (ADSL)
When they connect and the PPPoE session comes up, the bandwidth on the Virtual Access Interface is equal to the customer's downstream sync rate, so Customer A's virtual access interface, Virtual-Access 2.13 will say 40000kbps, and Customer B's virtual access interface Virtual-Access 2.39 will say 5000kbps.Using RADIUS, we apply a sub-qos-policy-out to the PPPoE session.I want to shape the customer to 80% of their sync rate so that we do not hit interface congestion in the DSL network which makes VoIP perform poorly.I cannot use an absolute value for the shape, because the sync rate varies for each customer.The problem I have is at present the policy-map is using the interface bandwidth of Gi0/0/1 (1Gbit) instead of the bandwidth of the Virtual Access Interface. Therefore the customer is being limited to 800Mbit which means the QoS policy will never take effect.
RADIUS Config Below:
cisco-avpair += ip:sub-qos-policy-out=QOS-POLICY-OUT-PARENT-DSL
Class Maps
class-map match-any QOS-CLASS-VOIP-RTP-DSL
match protocol rtp audio
match access-group name QOS-VOIP-RTP
class-map match-any QOS-CLASS-VIDEO-RTP-DSL
[code].....
Cisco WAN :: ASR1001 / Traffic Policing And Shaping
Feb 25, 2012I want to take 100Mb incoming from a service provider and police it off into several VRFs for customers.One of these VRFs will be 30M.I further need to traffic shape this (30Mb) out to 40 x 0.75Mbps (burstable to 30M) customers.
I am using an ASR1001.
Cisco WAN :: Confirm VPLS Supported On ASR1001?
May 21, 2011Does VPLS is supported on the Cisco ASR1001?With the feature navigator it looks like the ASR1001 is the only ASR1000 series router with VPLS support but I can't find any documentation confirming this.
View 10 Replies View RelatedCisco WAN :: ASR1001 Router - Change Name Without Removing Route?
May 30, 2013I've configured an static route in the ASR1001 router with a name with it eg: ip route 172.20.x.x 255.255.0.0 172.20.x.x 255.255.0.0 name To_system_X.i want to change the name without removing the route.
View 2 Replies View RelatedCisco Switching/Routing :: Vlan Bridging On ASR1001?
Mar 25, 2013I have following requirements to implement on cisco asr1001 router.
1.G0/0/0 and G0/0/1 interfaces are connected to a swith through trunk. Multiple customers are will be using this trunk interface . Each customer will have subinterface with dot1q tag.
2 I want both sides of the ASR1001 to be in same segment .
3 If above two is possible I would like to implement shaping on each customers sub-interface level
is above implementation is possible on asr1001. configration and ios information. I found a technology called EVC . but I am not sure is that the one suited for me.
network diagram is attached seperately.
Cisco WAN :: Is Traffic Shaping Supported On ASR1001 Ge Subinterface
Feb 26, 2013I am suggesting an ASR1001 as a head end router for a small hub spoke WAN consisting of 4 branch sites connecting to the head via LES. 3 are 100mb, one is 30 mb. I will be connecting the LES circuits to a swithc and then trunking to the router. I would like to apply outbound shaping to these 4 subinterfaces on the router, and just want to check this is supported?
View 1 Replies View RelatedCisco WAN :: ASR1001 Upgrade - License Module Command
Oct 4, 2011I'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adv enterprise 1 NO adv enterprise adv ip services 2 NO adv ip services ip base 3 NO ip base
Cisco Switching/Routing :: How To Enable Netflow Export On ASR1001
Nov 3, 2011To enable netflow export on ASR1001, do i need the firewall feaure license or not ?Docs are not really clear, NBAR requires FW license, but i am unsure about Netflow?
View 1 Replies View RelatedCisco WAN :: ASR1001 BDI Configuration Equivalent To BVIs And Bridge-groups?
Jul 26, 2012I have been asked what the equivalent of bridge-groups and BVIs is for an ASR1001 and I am struggling to find an example.If we have this IOS configuration:
bridge 1 protocol ieee
bridge 1 route ip
!
interface GigabitEthernet0/1
bridge-group 1
[code]....
What would be the equivalent for an ASR1001 with IOS XE?
Cisco Switching/Routing :: How To Copy Image From ASR1001 Directly To Another
Jun 12, 2012I want to copy a file from one ASR1001 and copy it to another. I ntried using tftp 32 but this is not going to work as the image is 315 MB.
how to copy an image from one router directly to another router's flash, if possible?
Cisco WAN :: ASR1001 - License For Advipservices Or Adventerprise To Activate Firewall Feature Set?
Oct 9, 2011I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success. My question is: do I need to get a license for advipservices or adventerprise to activate the firewall feature set?
View 5 Replies View RelatedCisco WAN :: 3560X With IP Base In The Ring
Dec 27, 2010I'm planning to use 2 3560X (access switch) on two different locations connected over two 2921 routers in small ring. 3560Xs are directly connected via fiber. Each 3560X is conected to its own 2921, and 2921s are connected together with GRE over IPSec. So they are creating ring.I'm planning to use small area 0 in this scenario. There are less then 200 routes in the network. Will 12.2(55) IP Base on 3560X support this scenario or I will need IP Services image? "OSPF for routed access" is still little vague to me, there are only tipical case study scenarios.
View 22 Replies View RelatedCisco WAN :: Does ASR 1001 With IP Base Support BGP
May 15, 2012I just would like to confirm if the ASR 1001 with IP Base license can support the normal BGP features such as remote-peering IPV4, Local-AS.
I am not looking for advanced features such as Route Reflectors, VPLS, L2 VPN, etc.
Cisco :: Migrate WCS Base License To NCS 1.1?
Apr 3, 2013We are trying to migrate WCS base license to NCS 1.1 .We have procured the migration license .In the licensing guide , it is mentioned as "L-WCS-NCS1-M-K9 License first, before adding the licenses migrated from your WCS installation"
1)Whether we need to add this migration license in WCS before genrating XML file or
2)Before adding XML file in NCS we need to add this in NCS ..
Cisco WAN :: 1941 With IP Base License
Aug 7, 2012I currently purchased, Cisco 1941/K9 with 2 onboard GE, 2 EHWIC slots, 1 ISM slot, 256MB CF default, 512MB DRAM default, IP Base.
Questions
1. With IP Base License, will I be able to run Frame Relay? I really need reference on what works and what doesn't between these different technology package licenses ? Actually frame relay is running on it right now, hope it doesn't suddenly stop after 60 days...
2. As I understand in order to run MPLS, I will need to upgrade to Data License "SL-19-DATA-K9". Since, I already have a Cisco 1941 to upgrade it, I need to order a spare license / paper PAK?
3. Does the IP Base License support site to site IPSEC VPN or do I need to purchase a security license "SL-19-SEC-K9"
4. Can I have both security and data license activated on the same device ?
5. If I do activate security or data license will I be able to use the IP Base features at the same time?
6. If I purchase a new Cisco 1941 with Data or Security License do I need to purchase the IP Base License then upgrade the license?
7. Is the 1941 suited for voice application routing ?
Cisco WAN :: Configure And Use C3560X With IP Base?
Feb 2, 2011Just bought this switch it has the IP base IOS and I need to use BGP and VRF-lite. My question is can I configure and use these two things without having to upgrade to the IP Services IOS?
View 5 Replies View RelatedAdd 2 Repeaters To A Base Station?
Aug 23, 2012Can I connect 2 or more wireless repeaters to the same wireless base station signal to extend wireless coverage? I.e. The base station is located in the centre of the building and the signal covers the middle but not the extreme end of the building. I would like to add a repeater on each opposite sides of the signal's reach so it covers the complete building. I can't use LAN cable and the building has different electricity supply to the 3 different part of the building so can't use the mains to carry the signal. Is this possible using wirless repeaters or do I have to use wireless bridge units to connect to the base station and then output with wireless access points attached to the bridge unit to extend the wirless signal?
View 6 Replies View RelatedCisco :: How To Tell If My 2960 Has Lan Base Or Lite Image
Apr 2, 2012How do I tell if my cisco 2960 has the Lan Base or Lan Lite image?
View 11 Replies View Related