I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success. My question is: do I need to get a license for advipservices or adventerprise to activate the firewall feature set?
View 5 RepliesI'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.
View 4 Replies View RelatedI'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adv enterprise 1 NO adv enterprise adv ip services 2 NO adv ip services ip base 3 NO ip base
I have a 2911 router with 15.1(4) Ios Version. I need to enable the evaluation sna feature but when I try to enter the command "license feature snasw" but I get an error, the command "License feature" does not exist.
View 3 Replies View Relatedi have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies View RelatedI purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
I have a cisco 7609 with sup engine 720, I want to implement VPLS for that I purchased a 7600-ES+20G3C with the adv license 76-ES+ADVIP-LIC in a separate pak?how to activate the license on the 7609.
View 3 Replies View RelatedI've been already purchased current cisco device (881g-k9),my vendor told me that there is possible to actrivate adipservices license on this router (i need encryption).i'm waiting now for license from my vendor .but for now i tried to activate trial adv_IP lic and got no success on it.So question is there possible to activate AdvancedIpServices license on this router?
View 3 Replies View RelatedI wanto delete the Evalution License and i want to activate the permanent license. find the attached snapshot of License.
View 7 Replies View RelatedI have recently purchased 2 x 1941 routers with 2 L-SL-19-SEC-K9= and 2 L-FL-SSLVPN10-K9= licenses. I've installed the licenses through Cisco Configuration Pro ver 2.5 and installation did not generate any errors. After saving config and reloading the device, on the License dashboard, the deploy status for the SSL VPN is "Not deployed" and I have no way of deploying it. The state also says "Active, Not in use". I have tried reinstalling the license via command line but get error "license duplicate - already installed" suggesting the installation was OK. The sec license deployed without any issues. Is there any way to manually deploy this SSL_VPN license?
View 4 Replies View RelatedI am not able to activate the wireless feature in siemens gigaset se568.
View 1 Replies View RelatedI have installed Cisco Prime Infrastructure 1.2 separately from LMS4.2. LMS4.2 is in production. I just want to run PI1.2 in parallel with LMS4.2 before migrating to PI1.2. Currently I have LifeCycle permanent license. Why don't I have the assurance lfeature set license. it is running in evaluation mode.
View 6 Replies View RelatedI have installed Cisco Prime Infrastructure 1.2 separately from LMS4.2. LMS4.2 is in production. I just want to run PI1.2 in parallel with LMS4.2 before migrating to PI1.2. Currently I have LifeCycle permanent license. Why don't I have the assurance lfeature set license. it is running in evaluation mode.
View 1 Replies View Relatedi have 2921 router with base license . i want to upgrade to it to security k9 feature or want to enable it. i have license file with product activation key. how should i do it. if any body have screen shot file
View 1 Replies View RelatedLately we have been comsidering an upgrade in our organization involving a 1921 router. The main role it will play is a load balancer/failover between 2 connections from 2 different ISPs. what additions are required to be added to this piece of equipment to make the configuration work. Im researching the matter now and it seems an extra card whould be purchased in addition to the router. Also, i cant seem to find much information on the available licenses to go with the router. will i need a special license to utilize the balancer/failover feature? (ip base, data, SEC).
View 2 Replies View RelatedThe model WS-C3750X-24T-L is only Lan Base. We need this switch to use EIGRP Protocol. Does it exist a License for supportting IP Base o IP Services Feature Set?
View 4 Replies View RelatedWhat's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI got a problem with a cisco asa 5580 like two days ago and the device stop working (there was a mainteinance window and after that the device didn't work). Now we receive the RMA and we are trying to configure the failover so the new device get the configuration form the one that is working.
But this is the message that I gettin:
Failover message decryption failure. Please make sure both units have the same failover shared key and crypto license or system is not out of memory
We already changed the shared key and crypto license but the failover is still down, what are the features that the cisco need to activate to enable the failover?
We just bought smartnet for our cisco 5510. How should i activate this support and get the benefits.
View 2 Replies View Relatedi have a pix 525 running 8.0(4) and asdm 6.1(5)i have two ethernet interfaces, and two gb ethernet interfaces
i connected both gb ethernet interfaces to a switchport, configured as trunkcan't seem to activate subinterfaces on the gb interface on the pix 525.
I've been trying to configured Websense urlfiltering using ZFW feature on my Cisco 881G router. The router is running on IOS 15.0(1)M with Advanced IP Services. And I have confirmed it supports urlfilter feature.
This is what I tried to accomplish but IOS version 15.0x seems to have different command set.
-----------------------
class-map type inspect httptraffic
match protocol http
parameter-map type urlfilter param
server vendor websense 10.20.30.40
[Code]...
What is the best way to deploy the IOS firewall feature?I have a Cisco 1841 router running 12.4.
View 4 Replies View RelatedI'm a bit confused about new NAT functionality in Ver 8.4(2). I've gone through all the documentation as well as different blogs but still not clear about the various things.One of these is NAT-CONTROL. I understand that this has now been removed. Does this means that traffic traversing the ASA doesn't need any NAT'ing commands unless specifically required by the administrator? In other words by default traffic is allowed through the firewall without any NAT'ing.
My Second Query
I've ASA5520 running ver 8.4(2). For inside interface, I've created 13 x sub-interfaces under Gi0/1. All have same security level i.e. 100. What I want to achieve is that:Traffic from these sub-interfaces should be NATTed to outside interface when going to internetBut, intra sub-interface traffic should be allowed without NAT'ing. I'm using RFC1918 on both sides i.e. source / destination The first point is not a problem it's working, however. I'm struggling with the second point. On ver 8.2, it wasn't a problem, I used NAT 0 with access-list permitting RFC1918 addresses as source and destination.
I have upgraded ASA5550 version from 7.2(4) to 8.4(2).
On version 7, I am used to "names" command, like this:
names
name 107.25.1.10 Picard
name 107.25.2.20 Administrativa
By addition, when configuring acls it was very usefull, for example:
access-list inside_access_out line 15 extended permit udp host Picard host 107.25.4.61 eq snmp
On version 8, I have verified that names replacement is no more available:
ASA(config)# access-list outside_access_in permit ip host ?
configure mode commands/options:
A.B.C.D Source host IP address
Should we active IPS feature in ASA 5500-x by useing license?in the 5500-x ordering guide:IPS is only sold as ASA-IPS combo SKUs i.e., one cannot add IPS service as an option on top of ASA SKU. For example, if IPS service is desired on ASA 5515-X appliance, the relevant SKU is ASA5515-IPS-K8 or ASA5515-IPS-K9.But my customer has actived it by using the ASA5525-IPS-SSP on ASA5525-K9.
View 2 Replies View RelatedI would like to knwo if i have dual ISP feature with my ASA 5520 licence? With ASA 5505 i can see Dual ISP feature but with ASA 5520 it's not!
View 3 Replies View Relatedi am going to implement a ASA5505 in one of my offices. I would like to use web filtering feature on it. Will it cause any performance degradation in ASA? will it utilized more memory?
View 1 Replies View RelatedI am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
View 1 Replies View RelatedRecently I want to apply traffic shape on my ASA5520, but after entering the configure mode of policy-map, I couldnot find the shape command.. If I type the command, the device would notify me that there is no such command.. My version is 8.0(2),PS. Police command is working fine...
View 5 Replies View RelatedI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
Me to a 2951 router with fireawall featureset. Ive begun to move the ACLs that where in the pix. However some of the rules are allowed to be typed in bur when i look at the ACL afterwards they are not what i typed in.
View 2 Replies View RelatedIn Cisco ASA Firewall 5510 does the feature content filter come built in?
View 1 Replies View RelatedAt this moment (firmware 1.0.3.5) the router has no IPv6 firewall and therefore when used in a typical dual stack IPv4/IPv6 network it has no protection regarding IPv6 traffic. Hopefully this will be fixed with a firmware update before the World IPv6 Day on the 6th of June 2012.
View 1 Replies View Related