Cisco Wireless :: Activate Permanent License On 5508 WLan Controller
Mar 16, 2013I wanto delete the Evalution License and i want to activate the permanent license. find the attached snapshot of License.
View 7 Replies
ADVERTISEMENT
Cisco Wireless :: 5508 - WLC Controller License Checkup
Aug 24, 2012I recently bought a Cisco 5508 WLC with SWC5500LPE-K9-70 and a Cisco 1262 AP with AIR-OPT60-DHCP vender class identifier .How can I check wether the SWC5500LPE-K9-70 is included on the 5508 wlc and AIR-OPT60-DHCP on the 1262 ap?
View 5 Replies View RelatedCisco Wireless :: 5508 - WLAN Controller Ip Conflict
Dec 12, 2011We’ve recently installed a 5508 w LAN controller for my organization wireless network and each time devices connect to this wireless network they receive an ip conflict error. All devices conflict with the ip address of IP address 0.0.0.0 with mac address 00-00-00-00-00-00.
All devices event viewer has this TCP error: “The system detected an address conflict for IP address 0.0.0.0 with the system having network hardware address 00-00-00-00-00-00. Network operations on this system may be disrupted as a result.” We previously experienced the same ip conflict with 12000 w LAN network that he had used as proof of concept.
Cisco Wireless :: 5508 - Configuring Repeater To Wlan Controller?
Jan 1, 2013I have Cisco 5508 Wlan Controller Software version 7.2.103.0 and I have Cisco AIR-CAP3602I-E-K9 Lightweight Access Points network and its working fine now I want to configure the Repeater in this network. Because there is one area we cannot layout the cable. How to add the repeater and how to configure the repeater in wlan controller network.
Do i need the change the software of Wlan Controller to support Mesh Network or this version 7.2.103.0 can support the repeater because for 1 access point i dont want to upgrade the version.
Cisco Wireless :: New 5508 Controller On Existing Wlan Network?
Mar 4, 2012I've got a couple new 5508 controllers to replace my 4404's. Im wondering though if I throw them on the network to setup, will there be any conflict with the current access points? Will they try and join the new controllers for any reason automatically? Is there a better way, or a best practice to provision these new controllers?
View 3 Replies View RelatedCisco Wireless :: 1310 LAP Is Not Joining To 5508 Wlan Controller V7.4?
Mar 15, 2013I have Cisco 5508 WLAN controller v7.4 and i have lap 1310 and it is not joining to this lan controller. What to do? How to join this lap to this lan controller? or how to convert it to autonomous because i dont find mode button on this access point?
View 6 Replies View RelatedCisco Wireless :: 5508 - Connect 3 Switches To WLan Controller
Feb 10, 2013I have Cisco 5508 Wlan Controller and its having 6 Fiber Ports and I have AIR-LAP1131AG-E-K9 Access Point. Can this Access Point will work with this Lan Controller? Can i connect 3 switches to this wlan controller?
View 1 Replies View RelatedCisco Wireless :: 5508 - Export Mac Filter From Wlan Controller?
Jan 15, 2013I've seen a discussion about importing mac addresses into the mac filter db on a cisco controller but is there a way to export the mac filter db? I have a Cisco 5508.
View 2 Replies View RelatedCisco Wireless :: LDAP Configuration With WLAN Controller 5508
Apr 28, 2013We have 5508 controller (redundant) & would like to configure Staff vlan to get authenticate with active directory.i am new to the controller device & want to configure controller with active directory (windows 2012).
5508 controller (Active & Standby) with 48 Access Point.(configuration Done) Guest Vlan (only for internet Access) controller based web authentication configured.
Staff Vlan ( inside & outside ). Need to configure with LDAP authentication?
Cisco Wireless :: WLan Controller 5508 - Latest IOS Version
Apr 23, 2013What is the latest IOS version for the WLan Controller 5508 ?
Actually I am using, Software Version7.3.102.0
I see the following at Cisco website:
Latest Releases
7.2.115.1(ED)7.3.112.0(ED)
7.0.240.0(ED)
7.4.100.0(ED)
Cisco Wireless :: 1510 Mesh AP With 5508 WLAN Controller
Feb 24, 2013We had our wireless mesh network running with 4400 Controller and 1510 A.Ps. Now that we have bought new 5508 Controller (with SW: 7.2) and 3600 Indoor APs, we are unable to add legacy APs on our new controller. After a wild googling I have found that for 1510 APs i need to be on SW ver: 4.0. But that will lead into another situation i-e I wont be able to have my 3600 APs on WLAN Controller.
View 1 Replies View RelatedCisco Wireless :: 5508 WLAN Controller / Still Disable 802.11b Data Rates
Dec 26, 2011Is it possible to use Cisco Band Select on a Cisco 5508 WLAN controller and still disable the 802.11b data rates?
View 2 Replies View RelatedCisco :: Wireless 5508 Controller - Guest Wlan Time Of Day Restrictions?
Oct 2, 2011Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
Is there a way to config time of day access to a WLAN ?
Cisco Wireless :: 5508 Wlan Controller 8 Ports Activation For Switches
Mar 16, 2013I have cisco 5508 wlan controller with 8 ports can i connect 8 switches on these port. If i connect what will be configuration to work all these ports because only port 1 is working if i connect to switch remaining ports when i connect status showing is enable but not working.
View 2 Replies View RelatedCisco Wireless :: 5508 / Virtual WLAN Controller Guest Anchor?
Dec 6, 2012We are planning a WLAN upgrade and the security policy is to forward wireless Guest user traffic to the DMZ controllers. We are now considering the Virtual WLAN Controller and all AP's will register with the virtual controllers and we will use Flexconnect for Staff and internal traffic that will switch their traffic onto the local switch.
We wish to forward the guest traffic to the DMZ Guest Anchor controller which will be a 5508 controller. This will also offer Office Extend AP service.I have looked at teh virtual controller docs and not very clear if this deployment model is supported. Below is a diagram of what we wish to deploy and is this a supported deployment model.
Cisco Wireless :: AIR-LAP1310G-E-K9 Access Point Not Joining To 5508 Wlan Controller?
Mar 13, 2013I have Cisco AIR-LAP1310G-E-K9 access point and 5508 wlan controller with version 7.0.220 and it is joining to the WLAN controller. I have enabled dhcp in the lan controller and i dont have external dns server. How to fix this issue? Can this LAN controller version will support this access point? My Lan Controller Management IP Address is 10.10.10.5 find the below configuration of 1300 access point.
AP001d.4513.dd68#reloadProceed with reload? [confirm]
%SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.flashfs[0]: 4 files, 2 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 7741440flashfs[0]: Bytes used: 2052608flashfs[0]: Bytes available: 5688832flashfs[0]: flashfs fsck took 14 seconds.Base ethernet MAC Address: 00:1d:45:13:dd:68Initializing ethernet port 0...Reset ethernet port 0...Reset done!ethernet link up, 100 mbps,
[code].....
Cisco :: 5508 - WLAN Disable On Controller Upgrade?
Feb 6, 2012I'm about to upgrade a 5508 controller so I can do the pre-download to the access points, but in every doc I find, it says to disable the WLAN's before upgrading. This makes no sense. I'm just moving code over, why do I have to disrupt my wireless network in order to move code?
View 7 Replies View RelatedCisco VPN :: 887 Cannot Activate SSL VPN License
Aug 7, 2012i have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies View RelatedCisco VPN :: Activate License For SSL VPN On 891 With IOS 15?
Jul 10, 2011I purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
Cisco WAN :: How To Activate License On 7609 With SUP Engine 720
Apr 15, 2013I have a cisco 7609 with sup engine 720, I want to implement VPLS for that I purchased a 7600-ES+20G3C with the adv license 76-ES+ADVIP-LIC in a separate pak?how to activate the license on the 7609.
View 3 Replies View RelatedCisco WAN :: 881G-K9 Activate IP Services License On This Router
Jul 23, 2011I've been already purchased current cisco device (881g-k9),my vendor told me that there is possible to actrivate adipservices license on this router (i need encryption).i'm waiting now for license from my vendor .but for now i tried to activate trial adv_IP lic and got no success on it.So question is there possible to activate AdvancedIpServices license on this router?
View 3 Replies View RelatedCisco Firewall :: ASA 5505 - Activate DMZ Interface On Restricted License
Aug 3, 2009I'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.
View 4 Replies View RelatedCisco Wireless :: WLC 5508 Not Able To Activate Internal DHPC Server
Sep 27, 2012I recently installed 2 wlc 5508 with the latest software 7.3.101.0. I am not able to activate the Internal DHPC Server. The following message appears: "Error in setting dhcp scop leasetime".
View 5 Replies View RelatedCisco WAN :: ASR1001 - License For Advipservices Or Adventerprise To Activate Firewall Feature Set?
Oct 9, 2011I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success. My question is: do I need to get a license for advipservices or adventerprise to activate the firewall feature set?
View 5 Replies View RelatedCisco Wireless :: 4404 Guest Anchor Controller With 5508 Foreign Controller?
Aug 12, 2012I know that the 3600 series APs are not supported on the 4404 WLC. However, would the following scenario be supported? I would like to use the 4404 (software rel. 7.0) as a guest anchor with a 5508 (software release 7.2) as the foreign controller supporting series 3600 APs. I ask because the APs do not need to join the guest anchor.
View 7 Replies View RelatedCisco Wireless :: 5508 Foreign Controller And 4400 Anchor Controller?
Jun 2, 2013We have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller. We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0. Will there be any issue if the anchor controller is not the same code as the foreign controller? Do I also have to upgrade the acnhor controller to 7.0.240.0?
View 2 Replies View RelatedCisco Wireless :: WLAN Support For WLC2504-25 License
Oct 25, 2011I have few question with WLC 2504 with 25 License AP. Our customer have SSID around 30 SSID then, is it possible to create WLAN around 30 SSID on WLC 2504? becuase i had tried to do it on WLC4404-25 License that can do or create WLAN with 30 SSID.
View 12 Replies View RelatedCisco Wireless :: WLAN Controller For AIR-LAP1142N-A-K9
Sep 25, 2012I'm new to wireless and I have 7 Cisco 1142N (AIR-LAP1142N-A-K9) APs. But The thing is I have to buy a WLAN controller for these APs. I checked on internet and I found the 2500 series Controllers are compatible with Cisco 1142N (AIR-LAP1142N-A-K9) APs. But I would like to know How can I find the exact supporting version of controller for Cisco Access points?
View 15 Replies View RelatedCisco Wireless :: Adding More License WLC 5508
Mar 12, 2013I have WLC 5508 with 12aps license, i will buy a new license with 50 Aps, my question, its possible add new license with 50 aps, totaling 62 aps licenses?
View 7 Replies View RelatedCisco Wireless :: 5508 With 50 AP License Upgrade From 7.0.220 To 7.4
Mar 13, 20135508 W LAN controller with 50 AP License upgrade from 7.0.220 to 7.4 is it will effect to the license and configuration? Because the license came pre- installed.
View 1 Replies View RelatedCisco Wireless :: Not Able To Get DHCP IP Via 2504 WLAN Controller
Jan 7, 2013I have a Cisco Wlan Controller 2504 with 1042N AP (3-nos) every thing was working fine from past 2 months. Now i am getting a issue with clients which are connected to the wireless AP, they are not able to get an dhcp IP address from the 2960 Switch (DHCP Server). The clients are getting IP address as 0.0.0.0. [code]
View 36 Replies View RelatedCisco Wireless :: 4404 - Changing WLAN ID On Controller
Jun 17, 2012Our company has 8 4404-100 Cisco wireless controllers and each WLC has 8 W LANs configured. They are all working fine. However, the WLAN ID sequence is not consistent. I'm wondering if it's possible to change the WLAN ID on these WLCs without (or slightly) impacting the users. I don't want to re-configure all the WLAN profiles.
View 13 Replies View RelatedCisco Wireless :: 1142s - AppleTV Via WLan Controller?
Oct 9, 2011what seems to be a common issue/query regarding getting AppleTV to work via the Wireless Lan Controller.We are running WCS 7.0.172.0, our WISM controllers are on software version 7.0.116.0 and our APs are a mixture of 1140 and 1142s with both 11a/n and 11b/g enabled.
What we are finding is that we are able to stream to the AppleTV box when connected to the LAN and both devices are on the same subnet.however, as soon as we go onto the WLAN ( both devices on the same subnet ) , the end device can no longer see the AppleTV box to stream too.
[code]...