Cisco Wireless :: 1142s - AppleTV Via WLan Controller?
Oct 9, 2011
what seems to be a common issue/query regarding getting AppleTV to work via the Wireless Lan Controller.We are running WCS 7.0.172.0, our WISM controllers are on software version 7.0.116.0 and our APs are a mixture of 1140 and 1142s with both 11a/n and 11b/g enabled.
What we are finding is that we are able to stream to the AppleTV box when connected to the LAN and both devices are on the same subnet.however, as soon as we go onto the WLAN ( both devices on the same subnet ) , the end device can no longer see the AppleTV box to stream too.
[code]...
View 7 Replies
ADVERTISEMENT
Sep 25, 2012
I'm new to wireless and I have 7 Cisco 1142N (AIR-LAP1142N-A-K9) APs. But The thing is I have to buy a WLAN controller for these APs. I checked on internet and I found the 2500 series Controllers are compatible with Cisco 1142N (AIR-LAP1142N-A-K9) APs. But I would like to know How can I find the exact supporting version of controller for Cisco Access points?
View 15 Replies
View Related
Jan 7, 2013
I have a Cisco Wlan Controller 2504 with 1042N AP (3-nos) every thing was working fine from past 2 months. Now i am getting a issue with clients which are connected to the wireless AP, they are not able to get an dhcp IP address from the 2960 Switch (DHCP Server). The clients are getting IP address as 0.0.0.0. [code]
View 36 Replies
View Related
Jun 17, 2012
Our company has 8 4404-100 Cisco wireless controllers and each WLC has 8 W LANs configured. They are all working fine. However, the WLAN ID sequence is not consistent. I'm wondering if it's possible to change the WLAN ID on these WLCs without (or slightly) impacting the users. I don't want to re-configure all the WLAN profiles.
View 13 Replies
View Related
Dec 12, 2011
We’ve recently installed a 5508 w LAN controller for my organization wireless network and each time devices connect to this wireless network they receive an ip conflict error. All devices conflict with the ip address of IP address 0.0.0.0 with mac address 00-00-00-00-00-00.
All devices event viewer has this TCP error: “The system detected an address conflict for IP address 0.0.0.0 with the system having network hardware address 00-00-00-00-00-00. Network operations on this system may be disrupted as a result.” We previously experienced the same ip conflict with 12000 w LAN network that he had used as proof of concept.
View 13 Replies
View Related
Jan 1, 2013
I have Cisco 5508 Wlan Controller Software version 7.2.103.0 and I have Cisco AIR-CAP3602I-E-K9 Lightweight Access Points network and its working fine now I want to configure the Repeater in this network. Because there is one area we cannot layout the cable. How to add the repeater and how to configure the repeater in wlan controller network.
Do i need the change the software of Wlan Controller to support Mesh Network or this version 7.2.103.0 can support the repeater because for 1 access point i dont want to upgrade the version.
View 22 Replies
View Related
Mar 4, 2012
I've got a couple new 5508 controllers to replace my 4404's. Im wondering though if I throw them on the network to setup, will there be any conflict with the current access points? Will they try and join the new controllers for any reason automatically? Is there a better way, or a best practice to provision these new controllers?
View 3 Replies
View Related
Feb 27, 2011
Just bought two new LAP1041N APs to add to a dead spot on our campus. Well when trying to set them up the will not stay connected to the WLAN Controller (model 4402). The new APs boot fine, and will even appear in the controller for brief moments, but after a few seconds they dissapear and start showing the discovery status light pattern (green, red, amber). Just wondering if I am doing something wrong with these APs, or what the issue could possible be.We have 10 other APs that as soon as we connected to network were detected by controller and we configured from there. Most of those are 1010 or 1020s, we have a few 1131s and 1100s.
View 7 Replies
View Related
Mar 15, 2013
I have Cisco 5508 WLAN controller v7.4 and i have lap 1310 and it is not joining to this lan controller. What to do? How to join this lap to this lan controller? or how to convert it to autonomous because i dont find mode button on this access point?
View 6 Replies
View Related
May 29, 2012
I will migrate a Cisco WLAN Controller 2125 to 2504,So I have one question?I need to make all configuration into the new Wlan Controller or I can migrate with one tool or something else?
View 15 Replies
View Related
Feb 10, 2013
I have Cisco 5508 Wlan Controller and its having 6 Fiber Ports and I have AIR-LAP1131AG-E-K9 Access Point. Can this Access Point will work with this Lan Controller? Can i connect 3 switches to this wlan controller?
View 1 Replies
View Related
Aug 3, 2011
we use wlc 4402 (Software Version 7.0.98.0) and want to allow only several wlan nic vendors to connect to a wlan ssid.According to this, is it possible to configure MAC Filtering with wildcards, e.g. aa:bb:cc:* ?
View 1 Replies
View Related
Jan 15, 2013
I've seen a discussion about importing mac addresses into the mac filter db on a cisco controller but is there a way to export the mac filter db? I have a Cisco 5508.
View 2 Replies
View Related
Apr 23, 2012
I have a 2504 and my goal is to automatically redirect a users home page when they connect to a certain internal website. Authentication isn't a real concern just now.
Is it possible to simply have a users home page redirected when they open their browser upon connecting to the SSID? All of the documents available have stated to use 802.1x / RADIUS or other fancy tools.
View 3 Replies
View Related
Apr 28, 2013
We have 5508 controller (redundant) & would like to configure Staff vlan to get authenticate with active directory.i am new to the controller device & want to configure controller with active directory (windows 2012).
5508 controller (Active & Standby) with 48 Access Point.(configuration Done) Guest Vlan (only for internet Access) controller based web authentication configured.
Staff Vlan ( inside & outside ). Need to configure with LDAP authentication?
View 9 Replies
View Related
Apr 23, 2013
What is the latest IOS version for the WLan Controller 5508 ?
Actually I am using, Software Version7.3.102.0
I see the following at Cisco website:
Latest Releases
7.2.115.1(ED)7.3.112.0(ED)
7.0.240.0(ED)
7.4.100.0(ED)
View 1 Replies
View Related
Feb 24, 2013
We had our wireless mesh network running with 4400 Controller and 1510 A.Ps. Now that we have bought new 5508 Controller (with SW: 7.2) and 3600 Indoor APs, we are unable to add legacy APs on our new controller. After a wild googling I have found that for 1510 APs i need to be on SW ver: 4.0. But that will lead into another situation i-e I wont be able to have my 3600 APs on WLAN Controller.
View 1 Replies
View Related
Apr 17, 2012
I have a customer whom has six LAP1131AG-K9 but no controller and they are interested in one of the new 2500 series, specifically a AIR-CT2504-5-K9 with a 5 AP add-on license to bring total AP capacity to 10. I can't determine clearly if this controller will work for these older AP's prior to them making the jump to 802.11n via the 3500 or 3600 series, looking to the community to confirm.
View 3 Replies
View Related
Dec 26, 2011
Is it possible to use Cisco Band Select on a Cisco 5508 WLAN controller and still disable the 802.11b data rates?
View 2 Replies
View Related
Nov 4, 2012
I need to take the backup of configuration file for WLAN Controller 4420, I tried all the possibilities given in the documentation but the backup fails, I have main confusion with the file name to be backedup, i am not able to findout the configuration filename any where even when i use CLI?
View 1 Replies
View Related
Jul 5, 2011
The Release Notes for 7.0.116.0 of WLC 5500 has a table which title is "Client Type", and it shows wireless adapters. My question is,
what kind of customer means? Wireless clients or clients for an specific application? If it was the first option, does it mean tha just this adapters could connect to my wireless network?
View 1 Replies
View Related
Oct 2, 2011
Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
Is there a way to config time of day access to a WLAN ?
View 7 Replies
View Related
Mar 16, 2013
I have cisco 5508 wlan controller with 8 ports can i connect 8 switches on these port. If i connect what will be configuration to work all these ports because only port 1 is working if i connect to switch remaining ports when i connect status showing is enable but not working.
View 2 Replies
View Related
Dec 6, 2012
We are planning a WLAN upgrade and the security policy is to forward wireless Guest user traffic to the DMZ controllers. We are now considering the Virtual WLAN Controller and all AP's will register with the virtual controllers and we will use Flexconnect for Staff and internal traffic that will switch their traffic onto the local switch.
We wish to forward the guest traffic to the DMZ Guest Anchor controller which will be a 5508 controller. This will also offer Office Extend AP service.I have looked at teh virtual controller docs and not very clear if this deployment model is supported. Below is a diagram of what we wish to deploy and is this a supported deployment model.
View 2 Replies
View Related
Mar 16, 2013
I wanto delete the Evalution License and i want to activate the permanent license. find the attached snapshot of License.
View 7 Replies
View Related
Jan 9, 2011
I have a Dell Studio 1537 running on Windows Vista? my computer stopped being able to connect to the internet a few days ago and a "Dell Wireless WLAN Controller closed and stopped working" (or something along those lines) box would keep on popping up. I did some reading around on the internet and decided that maybe I needed to update the "drivers" for it so I went to the Dell website and downloaded the most recent version for my Dell Wireless 1510 WLAN mini card...that didn't seem to work any after I installed it. So I went ahead and uninstalled it (I assume I must have uninstalled something I shouldn't have) and now I'm stuck at the same problem. I can't connect to the internet!In Network Connections, it continually says that "Windows cannot find any networks". In Device Manager, under Network Adapters, it doesn't list the card there, although it lists "Broadcom Netlink (TM) Gigabit Ethernet". And from some suggestions I found on the net, I tried ipconfig/all in the comand promt and it says "media disconnected".
View 6 Replies
View Related
Mar 18, 2012
When I connect my AppleTV to the wireless my AppleTV doesn't see any of the home sharing shares. When I connect it to wired it works fine. What am I missing?
View 7 Replies
View Related
Mar 13, 2013
I have Cisco AIR-LAP1310G-E-K9 access point and 5508 wlan controller with version 7.0.220 and it is joining to the WLAN controller. I have enabled dhcp in the lan controller and i dont have external dns server. How to fix this issue? Can this LAN controller version will support this access point? My Lan Controller Management IP Address is 10.10.10.5 find the below configuration of 1300 access point.
AP001d.4513.dd68#reloadProceed with reload? [confirm]
%SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.flashfs[0]: 4 files, 2 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 7741440flashfs[0]: Bytes used: 2052608flashfs[0]: Bytes available: 5688832flashfs[0]: flashfs fsck took 14 seconds.Base ethernet MAC Address: 00:1d:45:13:dd:68Initializing ethernet port 0...Reset ethernet port 0...Reset done!ethernet link up, 100 mbps,
[code].....
View 6 Replies
View Related
Jun 13, 2013
We are planning to setup a new WLAN using Cisco 2504 WLAN Controller and 1142N Access Point. Is it possible to create individual user accounts for the users those who all are connecting to this WLAN Network by using the 2504 WLAN Controller ?
View 1 Replies
View Related
May 20, 2012
I recently upgraded our controllers to the latest version 7 software, as I read this was one of the requirements to get them to connect. But I am not having any luck getting into a controller. Normally I plug them in to the network, they pop into the controller listed as something like AP5057.a844.xxxx and then I can finish configuring them, but a static IP on them, etc. This is the first of this model AP I have tried to deploy, so I am wondering what is different with these. or what I might be missing in the default config in the WLAN controllers. Niether of which are set to "Master" either.
View 10 Replies
View Related
Apr 30, 2013
I have an EA6500 and have three AppleTV... all three generations.l I also have a DirecTV Genie and DirecTV HD-DVR that, together, provide whole-house viewing. When I first setup the EA6400 based network, all three AppleTVs were listed and my whole-house viewing worked. This past Saturday, however, that changed, when I couldn't see the programs recorded on the HD-DVR, from the Genie. My troubleshooting determined one of the AppleTVs had been assigned the same address as the HD-DVR upstairs and that the HD-DVR wasn't listed as being connected. Once I reset everything, the IPs resolved and the whole-house viewing was resolved, however, none of the AppleTVs are listed as connected, even though they are. I can check the connections by the AppleTV device and see that they do, indeed, have an IP address, and I can view material from the iTunes cloud or stored on another PC in the local network. I reset everything again, but to no avail. No AppleTV devies show as connected from Smart Wi-Fi. The AppeTVs are all wired to the LAN... not wireless.
So, the question is, is there a fix to get AppleTV devices to list? All of my devices and router have the lastest firmware. BTW, I had a WRT610N, which I'm now useing as an access point, didn't have this issue.
View 9 Replies
View Related
Jul 2, 2008
I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.
View 22 Replies
View Related
Feb 6, 2010
I regularly get this message (but not everytime) when I start up Windows Vista Home Premium 32-bit.
"Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.a problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Then I get this following message:"Solution Found: Address a problem with your WLAN card.Your WLAN card has stopped working properly. This is a network adapter that allows your computer to connect to a wireless network. To find out if an updated version of your WLAN card is available, contact your device or computer manufacturer."The strange thing is even though I get this message I am still able to connect to the internet via a wireless network. So there is no problem as such it is just annoying to keep getting this message when Windows starts up.I have checked on the DELL Support website and I do have the most up-to-date driver already (Or I think I do).
The message refers to my:
Dell Inspiron 1520, Dell Wireless 1390 WLAN Mini-Card (with driver version 4.170.25.17)
View 16 Replies
View Related
