Cisco WAN :: QoS On ASR1001 Router?
Apr 28, 2013i need to know if the built-in GE ports in ASR1001 or ASR 1002 (-X) have the features of QoS without restrictions, or QoS features are supported in SPA modlue ports only?
View 2 Replies
ADVERTISEMENT
Cisco WAN :: ASR1001 Router - Change Name Without Removing Route?
May 30, 2013I've configured an static route in the ASR1001 router with a name with it eg: ip route 172.20.x.x 255.255.0.0 172.20.x.x 255.255.0.0 name To_system_X.i want to change the name without removing the route.
View 2 Replies View RelatedCisco WAN :: ASR1001 / L2 Over L3 With Load-balancing?
Nov 30, 2011i'm trying to accomplish the following:I want to trasport a bunch of vlan layer 2 etherchannel on a pair of layer3 connections, using L3 to load balance.i was considering a pair of options:
1) bridging + gre (non applicable since i cant bridge 2 interface beloging to a etherchannel to a tunnel)
2) L2TP is it possible to accomplish this with the above tecnology? any reference, configuration example?
3) AoMLPS is it possible to accomplish this with the above tecnology ? any reference, configuration example?
I cant modify topology, the routers used are ASR1001 It is mandatory that both sites have a layer2 connection between them.
Cisco :: ASR1001 - Hardware Is Not Recognized
Jan 24, 2012I noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
Cisco WAN :: Difference Between Ip Base And Ipservices For ASR1001?
Jul 29, 2011Any document to explain the differences in the Software images for the ASR1001 routers.
View 3 Replies View RelatedCisco WAN :: ASR1001 Licenses Information Required
Jan 29, 2011We are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View RelatedCisco WAN :: ASR1001 - Internet Load Balancing
Feb 3, 2013I want to load balance my Internet traffic between two ASR 1001 routers that are connected to our core switches. Both routers are connected to the same ISP (Comcast) going to the same BGP AS on different /30 subnets. Is there a way for me to load balance my Internet traffic using both connections with BGP rather than having one of these connections sitting idle? If not, the only solution I see is to configure my layer 3 devices to split internet traffic between both routers (i.e. default routes with same AD).
View 6 Replies View RelatedCisco WAN :: ASR1001 / What Is An Integrated Daughter Card
Oct 1, 2012I was doing some research on the Cisco ASR1001 model Router and within the description on the official Cisco page it mentions having various models that come with an "Integrated Daughter Card" or "IDC". I was curious as to what the IDC is exactly, considering there is an ASR1001 model without it.
View 2 Replies View RelatedCisco WAN :: ASR1001 / Use Bandwidth Of VAI In QoS Parent Policy?
Jan 3, 2013I've done a similar solution before where I put bandwidth inherit on the Dialer interface of the CPE and it inherited the ATM interface speed (the upload sync rate) and prevented the CPE from maxing out and hitting hardware queuing in the DSLAM. I can't seem to find a way to do this downstream from our ASR1K to the customer though.
Platform is ASR1001 with IOS 3.7.2 or 15.2(4)S
Problem description:We have many xDSL users (ADSL2+ and VDSL2). They all sync at different speeds depending on how far they are from the DSLAM.
Example:
Customer A might be connected at 40000kbps/10000kbps (VDSL2)
Customer B might be connected at 5000kbps/600kbps (ADSL)
When they connect and the PPPoE session comes up, the bandwidth on the Virtual Access Interface is equal to the customer's downstream sync rate, so Customer A's virtual access interface, Virtual-Access 2.13 will say 40000kbps, and Customer B's virtual access interface Virtual-Access 2.39 will say 5000kbps.Using RADIUS, we apply a sub-qos-policy-out to the PPPoE session.I want to shape the customer to 80% of their sync rate so that we do not hit interface congestion in the DSL network which makes VoIP perform poorly.I cannot use an absolute value for the shape, because the sync rate varies for each customer.The problem I have is at present the policy-map is using the interface bandwidth of Gi0/0/1 (1Gbit) instead of the bandwidth of the Virtual Access Interface. Therefore the customer is being limited to 800Mbit which means the QoS policy will never take effect.
RADIUS Config Below:
cisco-avpair += ip:sub-qos-policy-out=QOS-POLICY-OUT-PARENT-DSL
Class Maps
class-map match-any QOS-CLASS-VOIP-RTP-DSL
match protocol rtp audio
match access-group name QOS-VOIP-RTP
class-map match-any QOS-CLASS-VIDEO-RTP-DSL
[code].....
Cisco WAN :: ASR1001 / Traffic Policing And Shaping
Feb 25, 2012I want to take 100Mb incoming from a service provider and police it off into several VRFs for customers.One of these VRFs will be 30M.I further need to traffic shape this (30Mb) out to 40 x 0.75Mbps (burstable to 30M) customers.
I am using an ASR1001.
Cisco WAN :: Confirm VPLS Supported On ASR1001?
May 21, 2011Does VPLS is supported on the Cisco ASR1001?With the feature navigator it looks like the ASR1001 is the only ASR1000 series router with VPLS support but I can't find any documentation confirming this.
View 10 Replies View RelatedCisco Switching/Routing :: Vlan Bridging On ASR1001?
Mar 25, 2013I have following requirements to implement on cisco asr1001 router.
1.G0/0/0 and G0/0/1 interfaces are connected to a swith through trunk. Multiple customers are will be using this trunk interface . Each customer will have subinterface with dot1q tag.
2 I want both sides of the ASR1001 to be in same segment .
3 If above two is possible I would like to implement shaping on each customers sub-interface level
is above implementation is possible on asr1001. configration and ios information. I found a technology called EVC . but I am not sure is that the one suited for me.
network diagram is attached seperately.
Cisco WAN :: Is Traffic Shaping Supported On ASR1001 Ge Subinterface
Feb 26, 2013I am suggesting an ASR1001 as a head end router for a small hub spoke WAN consisting of 4 branch sites connecting to the head via LES. 3 are 100mb, one is 30 mb. I will be connecting the LES circuits to a swithc and then trunking to the router. I would like to apply outbound shaping to these 4 subinterfaces on the router, and just want to check this is supported?
View 1 Replies View RelatedCisco WAN :: ASR1001 Upgrade - License Module Command
Oct 4, 2011I'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adv enterprise 1 NO adv enterprise adv ip services 2 NO adv ip services ip base 3 NO ip base
Cisco Switching/Routing :: How To Enable Netflow Export On ASR1001
Nov 3, 2011To enable netflow export on ASR1001, do i need the firewall feaure license or not ?Docs are not really clear, NBAR requires FW license, but i am unsure about Netflow?
View 1 Replies View RelatedCisco WAN :: ASR1001 BDI Configuration Equivalent To BVIs And Bridge-groups?
Jul 26, 2012I have been asked what the equivalent of bridge-groups and BVIs is for an ASR1001 and I am struggling to find an example.If we have this IOS configuration:
bridge 1 protocol ieee
bridge 1 route ip
!
interface GigabitEthernet0/1
bridge-group 1
[code]....
What would be the equivalent for an ASR1001 with IOS XE?
Cisco Switching/Routing :: How To Copy Image From ASR1001 Directly To Another
Jun 12, 2012I want to copy a file from one ASR1001 and copy it to another. I ntried using tftp 32 but this is not going to work as the image is 315 MB.
how to copy an image from one router directly to another router's flash, if possible?
Cisco WAN :: ASR1001 - License For Advipservices Or Adventerprise To Activate Firewall Feature Set?
Oct 9, 2011I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success. My question is: do I need to get a license for advipservices or adventerprise to activate the firewall feature set?
View 5 Replies View RelatedLinksys Wireless Router :: E2000 Cisco Software And Router Password?
May 4, 2013I have an e2000 wireless router. I have the latest software version for the Cisco software.I have noticed that Cisco sets up the same password to access the router setup page as the wireless password..Anyone that connects to the main SSID will be able to connect to the setup page at 192.168.1.1...I know that I can change the password in the linksys setup page to whatever I want, but then when I open the Cisco software, it wants me to change the password to match what the administrator password is.Don't they realize that a wireless password is different than the Administrator password to access the router settings?
View 5 Replies View RelatedCisco Switching/Routing :: Router Boots Into Router With 2500 Series
Jul 27, 2009I m having 2500 series router. when i boot router automatically get into router(boot)> . how to solve?
View 6 Replies View RelatedLinksys Wireless Router :: E1200 When Run Cisco Connect After Couple Minutes Searching / Can't Find Router
Mar 9, 2012I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies View RelatedCisco VPN :: 7100 VPN Router To Vigor Draytek 2820 VPN Router?
Apr 19, 2011I have managed to get the tunnel up and working and we are sending data via the tunnel from our Cisco VPN router to the Draytek and onto the clients server. (they , the client, have acknowledged that they are recieving and sending packets back to us).But, we never see any returning packets at our VPN tunnel endpoint. When we send I see the encrypted packet count go up , but the packet decrypt remains at zero, this is using show crypto ipsec sa | begin x.x.x.x.
We do have other working VPN solutions, but this is the first connecting to a Draytek. The ACL's are matching, and they have NAT turned off. The routing is fine or else the tunnel would not come up as are all the tunnel parameters, else our packets would not arrive at their server.
Cisco VPN :: 2900 Router / One Hub Router And 3 Spokes - DMVPN Error
Jun 21, 2012I configured dmvpn at cisco router 2900. one hub router and 3 spokes. all of them are working normally but tomorrow i see one error at at one spoke router.
error:
Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license
Cisco WAN :: Configuring Linksys Router To 851W Router?
Oct 25, 2012I have a CISCO 851W router in the garage that I want to connect to my Linksys router in the office, which is connected to the internet.The 851W is connected from it's WAN port to Lan port 1 of the Linksys router. Now, currently that ethernet cable is a straight-through cable. Does it have to be crossover? If so, I can fix that.
I want the default gateway for the CISCO router to be 192.168.2.1. I am not sure how to configure that. [URL]
Cisco :: HQ Router Can't Send Packet To ISP Router?
Apr 4, 2012i'm currently doing task in this packet tracer, i've already completed 100% but i noticed that there are certain router cant send packet to the main router,i think the best way is to add default route, and i already add default route but it doesnt come out on the routing table,problem : HQ router cant send packet to ISP router?
View 13 Replies View RelatedLinksys Wireless Router :: E1000 Router Crashes When Copying Files Wirelessly
Dec 28, 2012I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies View RelatedLinksys Wireless Router :: WAP610N - Block Website On All Computers Connected To Router?
Jan 4, 2011Why there is no parental control feature built in for WAP610N... how do i block website on all computers connected to my router?
View 4 Replies View RelatedLinksys Wireless Router :: WRT160N - Internet Files Blocking Access To Router?
Aug 9, 2012We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Dual Band Router Compatible With DHCP And VPN
Mar 18, 2012Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies View RelatedLinksys Wireless Router :: E1000 FW - Firmware Update Failed / Router Hangs?
Mar 5, 2013The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's
FW_E1000_2.1.02.006_US_20130115.bin
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.
Linksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP
Jun 26, 2012I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
Linksys Wireless Router :: Use WRT54G Router With The Newer WRT310N To Extend Signal?
Aug 27, 2008Can you use your WRT54G router with the newer WRT310N router to extend your wireless signal? How?
View 7 Replies View RelatedLinksys Wireless Router :: WRT600N Standard Verizon Router Doesn't Have N Capability
Apr 6, 2012The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies View Related
