I was doing some research on the Cisco ASR1001 model Router and within the description on the official Cisco page it mentions having various models that come with an "Integrated Daughter Card" or "IDC". I was curious as to what the IDC is exactly, considering there is an ASR1001 model without it.
View 2 RepliesI have a HP Pavilion dv6000 with windows xp. A couple of days ago the computer couldn't find any wireless connections. I've been into devmgmt.msc and looked, but I don't see any network card. In the folder Network Connections there are three alternatives, and none are wireless...I've tried to download the drivers for chipset, modem and network, but I still can't find anything.
View 1 Replies View RelatedGonna use a Dell Precision T3500 with Win7 Pro as a file server for 6 PCs. Would it be worthwhile to pick up an Intel CT pcie x1 NIC (EXPI9301CTBLK) for under $40 or just go with the integrated Broadcom 5761?
View 3 Replies View RelatedI know the Nexus 5548P hardware does not support Netflow.I just need to know that if we introduce the layer 3 Daughter Board N55-D160L3 does this add Netflow support?
View 3 Replies View RelatedI have a DC topology based on 2 layers, access and aggregation, based on 2 pairs of N5548Ps, both without L3 Daugher Cards. My intent is to use the aggregation N5K pair as L3 inter VLAN layer, so I configured all the VLAN default GWs there. The 2 layers are interconnected via vPC, in a double-sided vPC topology for some N2Ks and some vSwitches. The point is that, despite connecitivity is working fairly ok, for some applications, like file transfer via either FTP or HTTP, between hosts in different VLANs, the performance is too poor. The file transfer starts ok, but after a while it becomes lower and lower. ICMP is working, but I can see some strange random behaviour, like having some packets taking more that 20 ms (sometimes 40 or more), whilst average is 2 ms.
I read through some articles saying that until you don´t have the L3 license (the one coming with L3 Daughter Cards) you can expect some weird behaviour on L3 level. Is that true?. What can I do apart of purchasing L3 Daughter Cards?. Can I enable L3 Basic license at the moment (I don´t need dynamic routing for now).
Here some excerpts of what I´m saying:
PING results:
10000 packets transmitted, 10000 packets received, 0.00% packet loss
round-trip min/avg/max = 0.809/2.496/57.559 ms
System version: 5.0(3)N2(1)
License and features on the N5Ks:
switch# sho license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
FCOE_NPV_PKG No - Unused -
FM_SERVER_PKG No - Unused -
ENTERPRISE_PKG No - Unused -
[code]....
i need to know if the built-in GE ports in ASR1001 or ASR 1002 (-X) have the features of QoS without restrictions, or QoS features are supported in SPA modlue ports only?
View 2 Replies View Relatedi'm trying to accomplish the following:I want to trasport a bunch of vlan layer 2 etherchannel on a pair of layer3 connections, using L3 to load balance.i was considering a pair of options:
1) bridging + gre (non applicable since i cant bridge 2 interface beloging to a etherchannel to a tunnel)
2) L2TP is it possible to accomplish this with the above tecnology? any reference, configuration example?
3) AoMLPS is it possible to accomplish this with the above tecnology ? any reference, configuration example?
I cant modify topology, the routers used are ASR1001 It is mandatory that both sites have a layer2 connection between them.
I noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
Any document to explain the differences in the Software images for the ASR1001 routers.
View 3 Replies View RelatedWe are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View RelatedI want to load balance my Internet traffic between two ASR 1001 routers that are connected to our core switches. Both routers are connected to the same ISP (Comcast) going to the same BGP AS on different /30 subnets. Is there a way for me to load balance my Internet traffic using both connections with BGP rather than having one of these connections sitting idle? If not, the only solution I see is to configure my layer 3 devices to split internet traffic between both routers (i.e. default routes with same AD).
View 6 Replies View RelatedI've done a similar solution before where I put bandwidth inherit on the Dialer interface of the CPE and it inherited the ATM interface speed (the upload sync rate) and prevented the CPE from maxing out and hitting hardware queuing in the DSLAM. I can't seem to find a way to do this downstream from our ASR1K to the customer though.
Platform is ASR1001 with IOS 3.7.2 or 15.2(4)S
Problem description:We have many xDSL users (ADSL2+ and VDSL2). They all sync at different speeds depending on how far they are from the DSLAM.
Example:
Customer A might be connected at 40000kbps/10000kbps (VDSL2)
Customer B might be connected at 5000kbps/600kbps (ADSL)
When they connect and the PPPoE session comes up, the bandwidth on the Virtual Access Interface is equal to the customer's downstream sync rate, so Customer A's virtual access interface, Virtual-Access 2.13 will say 40000kbps, and Customer B's virtual access interface Virtual-Access 2.39 will say 5000kbps.Using RADIUS, we apply a sub-qos-policy-out to the PPPoE session.I want to shape the customer to 80% of their sync rate so that we do not hit interface congestion in the DSL network which makes VoIP perform poorly.I cannot use an absolute value for the shape, because the sync rate varies for each customer.The problem I have is at present the policy-map is using the interface bandwidth of Gi0/0/1 (1Gbit) instead of the bandwidth of the Virtual Access Interface. Therefore the customer is being limited to 800Mbit which means the QoS policy will never take effect.
RADIUS Config Below:
cisco-avpair += ip:sub-qos-policy-out=QOS-POLICY-OUT-PARENT-DSL
Class Maps
class-map match-any QOS-CLASS-VOIP-RTP-DSL
match protocol rtp audio
match access-group name QOS-VOIP-RTP
class-map match-any QOS-CLASS-VIDEO-RTP-DSL
[code].....
I want to take 100Mb incoming from a service provider and police it off into several VRFs for customers.One of these VRFs will be 30M.I further need to traffic shape this (30Mb) out to 40 x 0.75Mbps (burstable to 30M) customers.
I am using an ASR1001.
Does VPLS is supported on the Cisco ASR1001?With the feature navigator it looks like the ASR1001 is the only ASR1000 series router with VPLS support but I can't find any documentation confirming this.
View 10 Replies View RelatedI've configured an static route in the ASR1001 router with a name with it eg: ip route 172.20.x.x 255.255.0.0 172.20.x.x 255.255.0.0 name To_system_X.i want to change the name without removing the route.
View 2 Replies View RelatedI have following requirements to implement on cisco asr1001 router.
1.G0/0/0 and G0/0/1 interfaces are connected to a swith through trunk. Multiple customers are will be using this trunk interface . Each customer will have subinterface with dot1q tag.
2 I want both sides of the ASR1001 to be in same segment .
3 If above two is possible I would like to implement shaping on each customers sub-interface level
is above implementation is possible on asr1001. configration and ios information. I found a technology called EVC . but I am not sure is that the one suited for me.
network diagram is attached seperately.
I am suggesting an ASR1001 as a head end router for a small hub spoke WAN consisting of 4 branch sites connecting to the head via LES. 3 are 100mb, one is 30 mb. I will be connecting the LES circuits to a swithc and then trunking to the router. I would like to apply outbound shaping to these 4 subinterfaces on the router, and just want to check this is supported?
View 1 Replies View RelatedI'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adv enterprise 1 NO adv enterprise adv ip services 2 NO adv ip services ip base 3 NO ip base
To enable netflow export on ASR1001, do i need the firewall feaure license or not ?Docs are not really clear, NBAR requires FW license, but i am unsure about Netflow?
View 1 Replies View RelatedI have been asked what the equivalent of bridge-groups and BVIs is for an ASR1001 and I am struggling to find an example.If we have this IOS configuration:
bridge 1 protocol ieee
bridge 1 route ip
!
interface GigabitEthernet0/1
bridge-group 1
[code]....
What would be the equivalent for an ASR1001 with IOS XE?
I want to copy a file from one ASR1001 and copy it to another. I ntried using tftp 32 but this is not going to work as the image is 315 MB.
how to copy an image from one router directly to another router's flash, if possible?
I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success. My question is: do I need to get a license for advipservices or adventerprise to activate the firewall feature set?
View 5 Replies View RelatedI can't get the internal 3G modem on my HP2510p with Windows 7 Professional 32 bit working. So far I've downloaded and installed the following:-
HP Broadand Wireless Modules - Sierra Wireless Inc
HP Connection Manager - Hewlett Packard
HP Wireless Assistant - Hewlett Packard
Qualcomm Gobi Driver Package for HP - QUALCOMM
but it's still saying 'no dial tone' and not reading that it has a 3G modem. If I've downloaded anything, how I can uninstall it.
How to upgrade the IOS of the Integrated wireless AP in a Cisco 881W using TFTP server (I do have software)Router side is not an issue it is the integrated AP that gives problem?
View 14 Replies View RelatedI have a client that that is installing a new network. They have requested the use of an CISCO891W-AGN-A-K9 mostly to be consistent with upgrades perfomed at other sites. I agree with the use of this router, so that's OK. The issue is that they have requested that I use the integrated PoE available on this model. I'm also OK with this as it will make a much neater installation. However, I can't seem to find much information on how to get the integrated PoE. I need clarification as to whether I can get a kit to upgrade this router. I generally purchase from sites like newegg or cdw (I'm an independent contractor) and I can't seem to find one with it. I have found some information on 800-IL-PM-4 and 800-ILPM-4 (who could confuse those ). Are they the same or different? Which one is the correct one and does it include the AC power adapter and can if be retro'ed into a router without the PoE?
View 2 Replies View RelatedI have 3850 switch with integrated WLC and i wonder if i can access the WLC via GUI ,also i need to know if it support Dynamic vlan assignment over SSID.
View 2 Replies View RelatedI am currently deploying Cisco ASR9K BNG solution and it needs to be integrated with a Cisco ACS 3.3 (yes that old .. going to migrate to new product in the future) equipment. There are several specific attributes need that are not on the base config of the ACS 3.3 but it seems that i can configure them manually:In addition to supporting a set of predefined RADIUS vendors and vendor-specific attributes (VSAs), Cisco Secure ACS supports RADIUS vendors and VSAs that you define. Vendors you add must be IETF-compliant; therefore, all VSAs that you add must be sub-attributes of IETF RADIUS attribute number 26..This is from the ACS 3.3 configuration manual.I have never done this user defined VSAs.
View 1 Replies View RelatedI have two desktop PCs connected via PRO/100VE LAN and am about to replace one of these with a desktop that has Integrated 10/100/1000Base-T. Will the two machines be able to communicate? One machine will use XP Home and the new machine Windows 7.
View 2 Replies View RelatedWhat I am trying to do is port forward certain ports so the servers I'm trying to run will allow other people to connect.So far I got no where since I got a new ISP. They can't provide any assistance since I use a netgear router. One of their tech support said their modem has a built in router. The rest all said no. I noticed that the IP in CMD when I type ipconfig /all is 192.168.1.(15-47) it switches every now and then. But that is a local IP. Wouldn't that single that the modem is already routing the IP? When I put my router on it switches to 10.0.0.(2-55). These are all local IP's though. Does the modem have an integrated routing feature? Verizon really sucks so far. They can't answer their own questions without conflicting with each other.
The modem is getting the IP, and putting it into a local IP (What I believe is a routing feature) for the network. Now the local IP goes to the netgear wireless router, and gets routed again (Changed the local IP to 10.0.0.?). The netgear only got a Local IP the first time however, so the external IP is not being... worked with in the netgear router. It is trying to port forward for the local IP address, which already works for me obviously, however it is not a WAN IP address and therefore no one else is able to connect to any of my servers.And lastly, verizon states they have only "Modems" and "Wireless routers" so if they have no modems that doesn't come with this feature, then I need to learn how to port forward while the IP is being routed twice, similarly to when you have two routers hooked into each other.
Bought a Vostro 220S about 2 months ago. After about three weeks, while I'm using it, the integrated NIC dies. All of a sudden I get the "Network Cable Disconnected" pop-up. No LEDs lit by the network jack. Contact Dell support who decides it's the motherboard.Three days later, the exact same failure. Contact support again. This time they want me to re-install Windows (yeah...right). I refused since the motherboard fixed it the first time. They finally agree to replace the motherboard again. Using the same router and cable that worked for years with my old computer. After the first failure, I switched ports on the router. While waiting for the motherboard replacements, I had installed an old PCI NIC I had laying around. Worked fine...still is. I'm not about to re-install Windows, which is what I know they'll want. I'll stick with the PCI card. Both of the people at Dell support as well as the tech they sent out told me they've not seen this before.
View 6 Replies View Relatedthere was a very close lightning strike near my house and my DELL XPS 210 accessed the router before but not after. Noother elctronics, even my 2 other DELL computers were affected. I've eliminated the NIC cables, router port, everything but the actual NIC card. But diagnostics say it's working properly. Could a registry entry have been corrupted (I have a registry backup the day before). Can I replace the Integrated NIC with an internal (or external) NIC? I'm running XP Professional SP3.
View 3 Replies View RelatedI am getting the new Cisco 2921/K9 router, which comes by default with 3 Integrated 10/100/1000 Ethernet ports. I have Comcast Cable as the ISP, so can I connect the ISP RJ45 Copper cable directly to one of the integrated ports or do I have to buy another WAN Interface Cards for the ISP.
View 3 Replies View RelatedI try to connect from my Windows 7 32bit PC with CISCO VPN Client (5.0.07.0410) to a CISCO Concentrator 3005.
Initializing the connection using certificate "xxx"
Contacting the security gateway at x.x.x.x...
Negotiating security policies...
Securing communications channel...
Secure VPN Connection terminated by Peer.
Reason 435: Firewall Policy Mismatch.
Connection terminated on: Dez 28, 2011 18:06:56 Duration: 0 day(s), 00:00.00
Not connected.
The client did not match the firewall policy configured on the central site VPN device. Cisco Systems Integrated Client Firewall should be enabled or installed on your computer.
Log on CISCO Concentrator:
32284 12/28/2011 18:06:56.620 SEV=5 IKE/141 RPT=40 x.x.x.x
Client-reported firewall does not match configured firewall: terminating tunnel.
Received -- Vendor: (0), Product (0), Caps: 0000. Expected -- Vendor: Cisco Sy
stems(1), Product: Cisco Integrated Client(0x00000001), Caps: 0002
32287 12/28/2011 18:06:56.740 SEV=5 IKE/194 RPT=8064 80.153.72.120
Group [xxx]
Sending IKE Delete With Reason message: Firewall Parameter Mismatch.
The strange thing is, that I don't have any problems with the same CISCO VPN Client on a Windows Vista PC:
32755 12/28/2011 19:04:24.540 SEV=6 IKE/143 RPT=6612 x.x.x.x
Processing firewall record. Vendor: Cisco Systems(1), Product: Cisco Integrated
Client(1), Caps: 0002, Version Number: 0.0.0.0, Version String: