I try to connect from my Windows 7 32bit PC with CISCO VPN Client (5.0.07.0410) to a CISCO Concentrator 3005.
Initializing the connection using certificate "xxx"
Contacting the security gateway at x.x.x.x...
Negotiating security policies...
Securing communications channel...
Secure VPN Connection terminated by Peer.
Reason 435: Firewall Policy Mismatch.
Connection terminated on: Dez 28, 2011 18:06:56 Duration: 0 day(s), 00:00.00
Not connected.
The client did not match the firewall policy configured on the central site VPN device. Cisco Systems Integrated Client Firewall should be enabled or installed on your computer.
Log on CISCO Concentrator:
32284 12/28/2011 18:06:56.620 SEV=5 IKE/141 RPT=40 x.x.x.x
Client-reported firewall does not match configured firewall: terminating tunnel.
Received -- Vendor: (0), Product (0), Caps: 0000. Expected -- Vendor: Cisco Sy
stems(1), Product: Cisco Integrated Client(0x00000001), Caps: 0002
32287 12/28/2011 18:06:56.740 SEV=5 IKE/194 RPT=8064 80.153.72.120
Group [xxx]
Sending IKE Delete With Reason message: Firewall Parameter Mismatch.
The strange thing is, that I don't have any problems with the same CISCO VPN Client on a Windows Vista PC:
I’m intending to establish a VPN connection between Nortel 1140E phone behind a ADSL router and a Cisco ASA 5520.can any one confirm to me if the vpn client on the Nortel 1140E phone is compatible with Cisco ASA
one Customer is using Cisco VPN Client 5.0.07x to connect to servers from home. This works well in all OS, except Windows 8.
When they install Cisco VPN Client on Windows 8, thay can connect to VPN gateway but unable to access any of internal servers using the same VPN UID password he can access server through W 7
· Is there any VPN client release for Windows 8? · Any change required on Cisco ASA firewall?
in VPN Gateway they are using ASA Version 7.2(4) (ASA5510)
I am trying to implement IPSec Authenticated Firewall Bypass on windows vista clients within my microsoft domain to avoid implementing numerous windows firewall port exceptions for each client.
This is working internally on our network, between services servers (i.e AV server), and desktop clients. However i am having a problem when the clients are remotly accessing the domain via the VPN client.I have open traffic ports (IKE-UDP500, ESP - IP Prot 50, AH - IP Prot 51) bidirectionally between the remote vpn clients subnet and the services servers, however when the endpoints initiate traffic to the services server, the IKE traffic is unencrypted?
Have a customer who has two ISPs right now and only using one through a basic SOHO router. Looking to upgrade to something that supports dual WAN and allows connections from outside in on both WAN ports. There are 25-30 inside hosts.Requirements: Allow incoming connections on BOTH WAN ports to a single inside host
-This is a web app that needs as close to 100% uptime as possible -Round robin DNS is set up -Failover for internal people should one of the ISPs go down
Looking at either an ASA 5505 with Security Plus or an 891 Integrated Service Router.
I have inherited a Cisco VPN 3005 and need to configure an interesting scenario:
2 LAN-2-LAN tunnels: 1 required an outside IP and has an existing static NAT of 192.168.1.1 -> 12.2.1.1 for 0.0.0.0 as the destination.I now have a need to created a new NAT for 192.168.1.1 to translate to 10.99.1.1 for destination of 13.3.1.1, 14.3.1.1 and 15.3.1.1.
Is it possible to have the above scenario, or even NAT 12.2.1.1 from the first NAT back to 10.99.1.1??
My organization has an old 3005 that i need to wipe the config of. The problem is that i cant gain access to the device via the console port. Every time i try connecting using a terminal session, all i see is a blinking cursor. As a result, my question to the group is there another way to wipe the config on this device?
I have an interesting problem. I've configured a site to site VPN connection between these two devices. I am using the CDMA card as the primary and only outside connection on the 1921. What happens is that by default the cellular connection is offline. When traffic is generated internally from that network to the concentrator side of this scenario the cellular connection goes online and builds the tunnel, no problem. However, I cannot initiate the tunnel from the concentrator side. I think what i need is a way to force the cellular connection to always be on, and if it fails to come back online.
I have created an L2L tunnel between my self and a 3rd party. I am using a Cisco ASA 5520 and the other end is using a Cisco 3005 VPN concentrator. The tunnel will get established and pass traffic both ways for a little while, it varies, sometimes 1 hour or last time we built it it was working for 17 hours, but at some point my ASA will stop transmitting but it will still be receiving packets. These errors start to show up when I look at the traffic going through my ASA interfaces:
713042 IKE Initiator unable to find policy: Intf Outside, Src: 192.168.xx.16, Dst: 10.1.xx.30
Then when I try to ping their hosts .30 and .27 I get:
713041 Group = 68.23.xx.xx, IP = 68.23.xx.xx, IKE Initiator: New Phase 2, Intf private, IKE Peer 68.23.xx.xx local Proxy Address 192.168.xx.16, remote Proxy Address 10.1.xx.30, Crypto map (Outside_map) 713041 Group = 68.23.xx.xx, IP = 68.23.xx.xx, IKE Initiator: New Phase 2, Intf private, IKE Peer 68.23.xx.xx local Proxy Address 192.168.xx.16, remote Proxy Address 10.1.xx.27, Crypto map (Outside_map) 713050 Group = 68.23.xx.xx, IP = 68.23.xx.xx, Connection terminated for peer 68.23.xx.xx. Reason: Peer Terminate Remote Proxy 10.1.xx.27, Local Proxy 192.168.xx.16
When I first configured this tunnel it was with 3DES and SHA for phase 1 & 2, but when the tunnel would come up my phase 1 would negotiate to an MD5 hash, even though I specifically entered SHA, so me and the 3rd party decided to bring all the hashes for phase 1 & 2 down to MD5, and that was when it was up for the longest, but the problem still came back eventually. My ASA config posted below:
ASA Version 8.2(3) name 192.168.xx.16 Server description Server name 10.1.xx.27 XYZ_01 name 10.1.xx.28 XYZ_02 name 10.1.xx.29 XYZ_03
IP routing is disabled on the 3750 (it's acting solely as a switch) IP routing is enabled with an EIGRP process running on the 3550 router that has the network for the 3005 broadcasting.
I can ping the vpn 3005 concentrator from a telnet session in the 3550 but not from the 3750.I can ping between the 3750 and the 3550 vlan management interfaces. Visually speaking it's like this
I know this because I tracerout to the 3005 from the 3750 and it resolved the default gateway configured for the 3550 properly but then started timing out.
The 3750 is trunked to the 3550.
3750 is vtp client mode 3550 is vtp server mode
I'm wondering if there's a layer 2 issue involved here as it is a VTP domain and maybe it's not returning properly.
I installed on 2 different PCs (Win7 64-bit) the Cisco VPN Client 5.0.07 with the same VPN profile for 2 different users. We use an ASA5505 (8.0(5) sec plus license) as the VPN end point for the clients. The VPN Clients can connect simultaneously to the ASA, they receive the split tunnel infos but only ONE client can ping the internal network ip range. The other one has no access to the internal resources! When they separately try to connect, there is no problem. Each of them can reach the internal net.On other 2 PCs (Win 7 32-bit) the clients have no problem reaching the internal net (simultaneously connect).
I have a client that has a 5505 installed. They want to VPN in with their Win7 laptop, but they don't want to shell out $1000 for the 10-pack Cisco VPN client.I have successfully setup the clientless VPN, and they can, through a browser, get to their files, but they'd like to map network drives so it's just like they're in the office.I tried setting the IP Sec up on the 5505, and then using the built-in Win7 VPN network connection, but no go.I also do everything through the ASDM, but I realize some things cannot be done. I'd prefer to use the ASDM!Anyone else get this configured? 99% of what I see out here is how to connect the 5505 for site-to-site VPN.
Client connects to PIX 501 but cannot see the LAN in Windows Explorer.Devices can be pinged by IP and hostname (netbios name)I can navagate to a server by typing in \servername.Why can I not get a resolution from Cisco techs? [code]
I have just purchased and setup a vpn on my ASA5505 and now I wish to setup a Windows VPN client to use it. Does CISCO have any free vpn clients for Windows?I tried to download a client from the CISCO downloads area, but it's for some kind of purchase agreement. I would have thought that the vpn client was free to download given my ASA comes with two free vpn licenses.
Looking for a working Cisco VPN client for Windows 7. There seems to be an availabel download for a ver 5, but you have to be a reseller etc.. Where do I download the Windows 7 supported VPN client to access my WRVS4400N router? If none, should I use 3rd party - IF yes to 3rd party, which one would you suggest?
I have set up our network with an RV220W as gateway/Wifi-AP,VPN host.I am able to connect over the WWW with the windows 7 client laptops no problem, BUT ,I cannot from my office reach out to the laptops, it seems as if the tunnel is one way.The users can do anything they need, but I want to be able to connect to them to update their AVG or render remote assistance etc.Ping from client to home network no problem.Client laptop is invisible to any ping etc FROM the home network.
In my environment, VPN users are connecting to corparate network via ASA 5540 and using 3.5.1, 4.8, 5.0 (32 bit) and 5.0(64 bit) VPN clients.After they have built VPN connection, they use program that generates traffic to a bradcast address (x.x.x.255) inside corparate network.
There is no problem with users who are using 3.5.1 and 5.0(64 bit), but 4.8 and 5.0 (32 bit) vpn clients can not add ARP entry to Windows machines ARP table. If i add ARP entry for x.x.x.255 on VPN interface, they can work.
I've just purchased a SRP527w router and loaded the new firmware which includes the 5 client VPN server function.
The function works great with my iPhone as a client, but I've been unable to make a connection from my Windows 7 laptop, as the built in VPN configuration doesn't have anywhere to put the group name.
Is there a VPN client, or is there some way to get the Windows 7 native VPN configuration to work?
The organization that I worked for purchased large number of Cisco Secure Services Client Licenses for Windows XP. Now they have plans to move to Windows 7. Reading different discussions, I know that SSC ver 5.1 does not work with Windows 7. My questions are:
1) Will there be a new SSC for Windows 7? Will we be able to configure the pre-package for installation with the new SSC?
2) Can we use the existing SSC ver 5 licenses with the new SSC for Win 7?
normally i use VPN Cisco installed on windows XP laptop and it works fine.Now i have Windows 7 with new version of VPN Client x64 5.0.07.0440 with same profile .pcf but i can't connect to the server.
I have this scenario, AS5510 ver 8.4(3), VPN Client 5.0.07, RADIUS authentication with IAS on Windows 2003 Server.The issue is that, establishing the connection with the VPN Client, if the user credentials are correct every things works fine, but if we introduce a wrong password I don't receive an error message or a again the authentication form.Nothing happens the VPN Client keep trying to "contact security gateway", after about 5 minutes it stops without any message.Debugging the authentication process in the ASA I see that if the password is incorrect the radius authentication response is "reject". I have also tried with a different version of VPN Client but nothing change.Using AnyConnect client every things works fine.
running cisco VPN client over Windows XP SP 2 64 bits.
I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.
Cisco vpn client 5.0.07.0410 on windows 7 PC does not show application window, minimizes to tray and does not launch and hard to figure what is wrong with application . tried re-installation and changing with different version of Cisco VPN client same issues is noticed on the PC.
I have a wireless system with Wireless controller and AP. I deploy wireless with WPA2-Enterprise and use Active directory domain account for authentication. But I have to modify some settings on client (windows XP, windows 7) to have it connect.
- If my clients joined in domain, they can connect to wireless sucessfully.
- If my clients are not joined in domain (they use local username and password), I have to go to wireless properties on client, and uncheck the option "Automatically use my Windows logon name and password" on EAP MSCHAPv2 properties. If not, windows automatically use the local account of the client to connect.
I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.
I have an ASa 5510 and setup remote dial in users.
I wanted to use the windows 7 built in client and also the draytek site to site VPN options however when they connect VPN traffic will not work however when i use the cisco VPN client then everything works fine.
All the VPN's connect pretty quickly.In the syslog I a getting errors when i try and ping something: [code]
Having an issue with the ipsec client being unable to add routes in Windows 7 while connecting to an asa 5510 running 8.3(2). Client connects, but the split-tunnel routes do not get installed on the OS. Vpn client versions used are 5.0.07.0290 and 5.0.07.0440 x64. The client status window shows that it received the split tunnel networks, but the log shows that the routes do not get installed with the following message:
Sev=Warning/2 CVPND/0xE3400013 AddRoute failed to add a route with metric of 100: code 87 Destiantion 192.168.100.0 Netmask 255.255.252.0 Gateway 0.30.1.1 Interface 10.30.1.201
Recently i have received one of my collegue's laptop that is running windows 7.I have installed cisco VPN client version 5.0.07.0290 on it and VPN client appears to connect to our ASA5540, but we are unable to connect (remote desktop) to any machines on our network as it does on our XP laptops. Furthermore, we cannot ping any as well. Also, while connected the Windows 7 machine is still able to access internet site as if split-tunneling was configured, which its not.
But after some searching , i found from "routeprint" output (shown below ) that my local internet gateway is prefered over the VPN gateway which is 10.10.4.1.Here 10.10.4.19 is the IP address assigned for VPN adaptor.
But aftersome time of idle state , it is again going back to original route state of prefering the local gateway of 192.168.1.2 and thus unable to connect to Remote Desktop again.
I'm having problem establish l2tp/ipsec vpn connection from Windows vista/7 vpn client to cisco 1921 ( ios 15.2 ) C1 --------> (internet cloud) ---------> (cisco 1921)----->LAN
Error that I'm retrieving is always the same: Error 789: "The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer"
But I'm able to establish l2tp/ipsec vpn connection to the same vpn server with my iPhone 4.
Below is isakmp debug log from lns router(cisco 1921) when I've tried to establish vpn with windows client. Anything useful from these logs to point me on the right direction to finally solve this problem with windows clients.
#debug crypto isakmp *Apr 8 10:56:47.018: ISAKMP (0): received packet from 186.51.43.137 dport 500 sport 987 Global (N) NEW SA *Apr 8 10:56:47.018: ISAKMP: Created a peer struct for 186.51.43.137, peer port 987 *Apr 8 10:56:47.018: ISAKMP: New peer created peer = 0x3296C24C peer_handle = 0x80000068 [Code]...
Is there a safe way to use the Cisco VPN Client (V5.x) and Cisco Quick VPN (V1.4.1.2) on the same Windows PC? I need to access my office RVS4000 and my customer's PIX 506 from the same laptop (but not at the same time).
Perhaps I should be asking "Is there a single Windows VPN client that works with both the Cisco RVS4000 and Cisco PIX 506? I have seen these questions asked on various forums but have yet to see a definitive answer.
can I use Windows 7 Native VPN client to connect to the ASA..and are there docs out there that support install and config ? I heard it is possible but not able to confirm .
