normally i use VPN Cisco installed on windows XP laptop and it works fine.Now i have Windows 7 with new version of VPN Client x64 5.0.07.0440 with same profile .pcf but i can't connect to the server.
View 2 Repliesrunning cisco VPN client over Windows XP SP 2 64 bits.
I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.
I have a PCF file that works fine on Windows XP. The tunnel to the ASA5505 comes up, and I can ping my server at 10.1.1.2.
I take the same PCF file and put it on a Windows 7 machine client version 5.0.07.0440 and the tunnel comes up. But I'm unable to ping my 10.1.1.2 server.
Does something in the pcf file need to change for this version of the client?
How to uninstall Cisco VPN client 5.0.07.0440, using SCCM group policy or may be a login script?
[code]....
I have a wireless system with Wireless controller and AP. I deploy wireless with WPA2-Enterprise and use Active directory domain account for authentication. But I have to modify some settings on client (windows XP, windows 7) to have it connect.
- If my clients joined in domain, they can connect to wireless sucessfully.
- If my clients are not joined in domain (they use local username and password), I have to go to wireless properties on client, and uncheck the option "Automatically use my Windows logon name and password" on EAP MSCHAPv2 properties. If not, windows automatically use the local account of the client to connect.
can I use Windows 7 Native VPN client to connect to the ASA..and are there docs out there that support install and config ? I heard it is possible but not able to confirm .
View 1 Replies View Relatedi have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
I installed on 2 different PCs (Win7 64-bit) the Cisco VPN Client 5.0.07 with the same VPN profile for 2 different users. We use an ASA5505 (8.0(5) sec plus license) as the VPN end point for the clients. The VPN Clients can connect simultaneously to the ASA, they receive the split tunnel infos but only ONE client can ping the internal network ip range. The other one has no access to the internal resources! When they separately try to connect, there is no problem. Each of them can reach the internal net.On other 2 PCs (Win 7 32-bit) the clients have no problem reaching the internal net (simultaneously connect).
View 0 Replies View RelatedI have a client that has a 5505 installed. They want to VPN in with their Win7 laptop, but they don't want to shell out $1000 for the 10-pack Cisco VPN client.I have successfully setup the clientless VPN, and they can, through a browser, get to their files, but they'd like to map network drives so it's just like they're in the office.I tried setting the IP Sec up on the 5505, and then using the built-in Win7 VPN network connection, but no go.I also do everything through the ASDM, but I realize some things cannot be done. I'd prefer to use the ASDM!Anyone else get this configured? 99% of what I see out here is how to connect the 5505 for site-to-site VPN.
View 4 Replies View RelatedClient connects to PIX 501 but cannot see the LAN in Windows Explorer.Devices can be pinged by IP and hostname (netbios name)I can navagate to a server by typing in \servername.Why can I not get a resolution from Cisco techs? [code]
View 1 Replies View RelatedI have just purchased and setup a vpn on my ASA5505 and now I wish to setup a Windows VPN client to use it. Does CISCO have any free vpn clients for Windows?I tried to download a client from the CISCO downloads area, but it's for some kind of purchase agreement. I would have thought that the vpn client was free to download given my ASA comes with two free vpn licenses.
View 5 Replies View RelatedLooking for a working Cisco VPN client for Windows 7. There seems to be an availabel download for a ver 5, but you have to be a reseller etc.. Where do I download the Windows 7 supported VPN client to access my WRVS4400N router? If none, should I use 3rd party - IF yes to 3rd party, which one would you suggest?
View 1 Replies View RelatedI have set up our network with an RV220W as gateway/Wifi-AP,VPN host.I am able to connect over the WWW with the windows 7 client laptops no problem, BUT ,I cannot from my office reach out to the laptops, it seems as if the tunnel is one way.The users can do anything they need, but I want to be able to connect to them to update their AVG or render remote assistance etc.Ping from client to home network no problem.Client laptop is invisible to any ping etc FROM the home network.
View 2 Replies View RelatedIn my environment, VPN users are connecting to corparate network via ASA 5540 and using 3.5.1, 4.8, 5.0 (32 bit) and 5.0(64 bit) VPN clients.After they have built VPN connection, they use program that generates traffic to a bradcast address (x.x.x.255) inside corparate network.
There is no problem with users who are using 3.5.1 and 5.0(64 bit), but 4.8 and 5.0 (32 bit) vpn clients can not add ARP entry to Windows machines ARP table. If i add ARP entry for x.x.x.255 on VPN interface, they can work.
I've just purchased a SRP527w router and loaded the new firmware which includes the 5 client VPN server function.
The function works great with my iPhone as a client, but I've been unable to make a connection from my Windows 7 laptop, as the built in VPN configuration doesn't have anywhere to put the group name.
Is there a VPN client, or is there some way to get the Windows 7 native VPN configuration to work?
one Customer is using Cisco VPN Client 5.0.07x to connect to servers from home. This works well in all OS, except Windows 8.
When they install Cisco VPN Client on Windows 8, thay can connect to VPN gateway but unable to access any of internal servers using the same VPN UID password he can access server through W 7
· Is there any VPN client release for Windows 8?
· Any change required on Cisco ASA firewall?
in VPN Gateway they are using ASA Version 7.2(4) (ASA5510)
The organization that I worked for purchased large number of Cisco Secure Services Client Licenses for Windows XP. Now they have plans to move to Windows 7. Reading different discussions, I know that SSC ver 5.1 does not work with Windows 7. My questions are:
1) Will there be a new SSC for Windows 7? Will we be able to configure the pre-package for installation with the new SSC?
2) Can we use the existing SSC ver 5 licenses with the new SSC for Win 7?
i have server 2008 machine..how can i access windows 7 as client system?
View 1 Replies View RelatedI want vpn client for windows 7 64 bit an with that internet download should work
View 1 Replies View RelatedI have this scenario, AS5510 ver 8.4(3), VPN Client 5.0.07, RADIUS authentication with IAS on Windows 2003 Server.The issue is that, establishing the connection with the VPN Client, if the user credentials are correct every things works fine, but if we introduce a wrong password I don't receive an error message or a again the authentication form.Nothing happens the VPN Client keep trying to "contact security gateway", after about 5 minutes it stops without any message.Debugging the authentication process in the ASA I see that if the password is incorrect the radius authentication response is "reject". I have also tried with a different version of VPN Client but nothing change.Using AnyConnect client every things works fine.
View 1 Replies View RelatedCisco vpn client 5.0.07.0410 on windows 7 PC does not show application window, minimizes to tray and does not launch and hard to figure what is wrong with application . tried re-installation and changing with different version of Cisco VPN client same issues is noticed on the PC.
View 1 Replies View RelatedI have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.
View 4 Replies View RelatedI have an ASa 5510 and setup remote dial in users.
I wanted to use the windows 7 built in client and also the draytek site to site VPN options however when they connect VPN traffic will not work however when i use the cisco VPN client then everything works fine.
All the VPN's connect pretty quickly.In the syslog I a getting errors when i try and ping something: [code]
Having an issue with the ipsec client being unable to add routes in Windows 7 while connecting to an asa 5510 running 8.3(2). Client connects, but the split-tunnel routes do not get installed on the OS. Vpn client versions used are 5.0.07.0290 and 5.0.07.0440 x64. The client status window shows that it received the split tunnel networks, but the log shows that the routes do not get installed with the following message:
Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 100: code 87
Destiantion 192.168.100.0
Netmask 255.255.252.0
Gateway 0.30.1.1
Interface 10.30.1.201
[code].....
Recently i have received one of my collegue's laptop that is running windows 7.I have installed cisco VPN client version 5.0.07.0290 on it and VPN client appears to connect to our ASA5540, but we are unable to connect (remote desktop) to any machines on our network as it does on our XP laptops. Furthermore, we cannot ping any as well. Also, while connected the Windows 7 machine is still able to access internet site as if split-tunneling was configured, which its not.
But after some searching , i found from "routeprint" output (shown below ) that my local internet gateway is prefered over the VPN gateway which is 10.10.4.1.Here 10.10.4.19 is the IP address assigned for VPN adaptor.
Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 25 0.0.0.0 0.0.0.0 10.10.4.1 10.10.4.19 100
But after i manually add the below route on windows 7 laptop , it started connecting to remote desktop successfully.
route change 0.0.0.0 mask 0.0.0.0 10.10.4.1 metric 20
But aftersome time of idle state , it is again going back to original route state of prefering the local gateway of 192.168.1.2 and thus unable to connect to Remote Desktop again.
I try to connect from my Windows 7 32bit PC with CISCO VPN Client (5.0.07.0410) to a CISCO Concentrator 3005.
Initializing the connection using certificate "xxx"
Contacting the security gateway at x.x.x.x...
Negotiating security policies...
Securing communications channel...
Secure VPN Connection terminated by Peer.
Reason 435: Firewall Policy Mismatch.
Connection terminated on: Dez 28, 2011 18:06:56 Duration: 0 day(s), 00:00.00
Not connected.
The client did not match the firewall policy configured on the central site VPN device. Cisco Systems Integrated Client Firewall should be enabled or installed on your computer.
Log on CISCO Concentrator:
32284 12/28/2011 18:06:56.620 SEV=5 IKE/141 RPT=40 x.x.x.x
Client-reported firewall does not match configured firewall: terminating tunnel.
Received -- Vendor: (0), Product (0), Caps: 0000. Expected -- Vendor: Cisco Sy
stems(1), Product: Cisco Integrated Client(0x00000001), Caps: 0002
32287 12/28/2011 18:06:56.740 SEV=5 IKE/194 RPT=8064 80.153.72.120
Group [xxx]
Sending IKE Delete With Reason message: Firewall Parameter Mismatch.
The strange thing is, that I don't have any problems with the same CISCO VPN Client on a Windows Vista PC:
32755 12/28/2011 19:04:24.540 SEV=6 IKE/143 RPT=6612 x.x.x.x
Processing firewall record. Vendor: Cisco Systems(1), Product: Cisco Integrated
Client(1), Caps: 0002, Version Number: 0.0.0.0, Version String:
I'm having problem establish l2tp/ipsec vpn connection from Windows vista/7 vpn client to cisco 1921 ( ios 15.2 )
C1 --------> (internet cloud) ---------> (cisco 1921)----->LAN
Error that I'm retrieving is always the same: Error 789: "The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer"
But I'm able to establish l2tp/ipsec vpn connection to the same vpn server with my iPhone 4.
Below is isakmp debug log from lns router(cisco 1921) when I've tried to establish vpn with windows client. Anything useful from these logs to point me on the right direction to finally solve this problem with windows clients.
#debug crypto isakmp
*Apr 8 10:56:47.018: ISAKMP (0): received packet from 186.51.43.137 dport 500 sport 987 Global (N) NEW SA
*Apr 8 10:56:47.018: ISAKMP: Created a peer struct for 186.51.43.137, peer port 987
*Apr 8 10:56:47.018: ISAKMP: New peer created peer = 0x3296C24C peer_handle = 0x80000068
[Code]...
Is there a safe way to use the Cisco VPN Client (V5.x) and Cisco Quick VPN (V1.4.1.2) on the same Windows PC? I need to access my office RVS4000 and my customer's PIX 506 from the same laptop (but not at the same time).
Perhaps I should be asking "Is there a single Windows VPN client that works with both the Cisco RVS4000 and Cisco PIX 506? I have seen these questions asked on various forums but have yet to see a definitive answer.
When I start the installation of sonicwall vpn client 2.4 in Windows 7 that sends me the following message "unable to manage networking component. operating system corruption may be preventing installation".I use the version 2.4 Windows 7 32-bit?
View 2 Replies View RelatedHow to properly install default mail client windows 7
View 1 Replies View Relatedhow do i download the mail client for windows 7 ?
View 1 Replies View RelatedJust upgraded Cisco ISE to 1.1.1 in my lab/demo environment and am now having problems with a basic posture implementation. In short I connect to a wireless SSID and check posture based on the presence of a file. The NAC agent is declaring my host as compliant and granting full network access however about 5 seconds later it it checks for requirements again while placing my host in the temporary network access. At this point it states I am compliant again and 5 seconds later scans again. This behaivour does not stop and continues endlessly until I close the wireless connection. I had no problems with this setup on 1.1.All logs indicate successful compliance and no errors in terms of compliance.
View 33 Replies View RelatedI have a Cisco AnyConnect 2.5.2006 failing installation on an upgrade from 2.4.1012. Win7 64-bit.RunOnce exists in the registry and I even added everyone/full perms to it to make sure it wasn't a perms issue. (it seems everyone recommends checking this key exists)I've cleaned the system and the registry multiple time for anything AnyConnect related. The installation 'appears' to fail on the installation of the 64-bit virtual adapter
Installation log is attached to this post.
[code]....