Cisco Switching/Routing :: Feature Set LAN Base / Lite (2960) And LAN / IP Base (3650X)?

Mar 28, 2012

1)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:

LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?

View 2 Replies


Cisco Switching/Routing :: LAN Base Software For 2960 Lite Switches?

Feb 6, 2012

We ordered 4x cisco 2960 switch with LAN Lite software by mistake. Can we upgrade them to Lan Base?When I change boot image I get Error: hardware not supported by firmware.

View 3 Replies View Related

Cisco Switching/Routing :: 2960 Switch LAN Base To IP Base

Nov 14, 2011

can we upgrade 2960 switch  from Lanbase IOS to IPbase

View 4 Replies View Related

Cisco :: How To Tell If My 2960 Has Lan Base Or Lite Image

Apr 2, 2012

How do I tell if my cisco 2960 has the Lan Base or Lan Lite image?

View 11 Replies View Related

Cisco :: Difference Between Lite Entry And Base 2960 Switches

Jul 1, 2012

Thinking of getting one of those 8-port 2960 for a CCNP study. Is the difference between the C2960-8TC-S and the C2960-8TC-L models in Hardware, or in IOS? or both? And if it's in IOS, is the S upgradable to L?

View 7 Replies View Related

Cisco Switching/Routing :: WS-C2960-24TC - LAN Base And Lite IOS Install

Jul 18, 2012

A quick one because I'm scratching my head trying to figure the difference between the 2960 LAN Base and LAN Lite IOS installs. I want to put a 2960 into a site which has as layer 2 link on dark fiber taking it elsewhere. This part I'm not concerned about - the WS-C2960--24TC will do what I need without issue - but I don't know if I can get away with LAN Lite, or if I need LAN Base.
I basically need V LAN's with associated SVI's, and a routed link on the up link port (I don't care if it's a switch port with an associated SVI or a no switch port and IP address), but it's got to be able to run OSPF. Can I do this with LAN base on this series switch? Or do I need to go for a higher series (3560?). I *could* get away with static routes, but my boss is walking death on them unless I can 100% prove they're necessary, so I'd rather not right that fight!

View 5 Replies View Related

Cisco Switching/Routing :: 3750X IP Base IOS Feature Set?

Oct 26, 2011

I have been looking to find out the list of features that the IP Base IOS has for the 3750X series switch.  What would be ideal is a comparable list but essentially I need to know which of the LAN Base/IP Base/IP Services has SSH functionality. 

View 1 Replies View Related

Cisco Switching/Routing :: 3750x 12.2-55.SE3 IP Base Feature Set?

Sep 9, 2012

Full feature set for IP Base with the 3750x.I just wanted to verify that I could create a routed port, turn ip routing on, and create static routes as well as a default route. From what I can find, there shouldn't be a problem with this on the IP Base Feature Set, I just wanted to verify. Or any link for the Features of IP Base on the 3750x.

View 3 Replies View Related

Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking

May 6, 2012

I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..

View 4 Replies View Related

Cisco Switching/Routing :: WS-C3750X-24T-L License For Supporting IP Base / Services Feature Set?

Jan 7, 2012

The model WS-C3750X-24T-L is only Lan Base. We need this switch to use EIGRP Protocol. Does it exist a License for supportting IP Base o IP Services Feature Set?

View 4 Replies View Related

Cisco Switching/Routing :: Possible To Load LAN Base Image On Switch 2960 TC-S

Nov 19, 2012

I'd like to know if is it possible to load lan base image on Cisco Switch 2960 TC-S. This model (WS-C2960-48TC-S) come with lan lite image and it's the same (phisically) of the 2960 TC-L (lan base image).If I try to upload the lan base image on flash of 2960 TC-S will works?? ..or the switch goes damaged?

View 2 Replies View Related

Cisco WAN :: 2651XM - NAT Feature Set / Can IP-BASE Be Used On Router

Apr 17, 2012

I have Cisco 2651XM and currently running old IOS c2600-is-mz.123-26.bin (IP PLUS) which I used the NAT protocol. I was wondering can I use IP-BASE on this router and I am not sure if this feature set has NAT protocol.

View 1 Replies View Related

Cisco Switching/Routing :: Does LAN Base IOS Support SSO In L2 4507?

Apr 26, 2012

We will deploy several 4507 with 2xsup7 as a L2 access switches for our office.Does LAN_Base IOS version support SSO or we need purchase IP_Base IOS (L3)?

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 3560-X IOS 15.0(2) IP Base?

Nov 29, 2012

We have observed increase of CPU utilization of 50% after upgrade from 15.0(1)SE3 to 15.0(2).The SDM template is  "desktop default" template.The increase of CPU utilization in Switches with LAN Base after upgrade is about 10%.
How to find the cause for the 50% increase ?This is command is the output of 15.0(2). The calculated sum for 5min process-utilization is 21% plus 1% interrupt is 22 %. Where is the rest ?
switch#sh proc cpu  sorted 5min | exc 0.00
CPU utilization for five seconds: 30%/1%; one minute: 29%; five minutes: 28%
PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
169   135084171    33273787       4059  9.92%  8.94%  8.73%   0 Hulc LED Process
  83    80075989    13546109       5911  5.60%  5.39%  5.38%   0 RedEarth Tx Mana


View 17 Replies View Related

Cisco Switching/Routing :: 3560 - LAN Base On 3560X

Nov 1, 2011

why Cisco make 3560x switches with Lan Base(no routing functions)? What happen if I load an Image  L3, previously downloaded?    my device lost the warranty? or it doesn matter?

View 1 Replies View Related

Cisco Switching/Routing :: 2911 Router With Base And Security

Feb 12, 2013

We have purchased a number of 2911 routers.We got Base & security license as we wanted to enable encryption. However we probably wont use the security.We are replacing 2811 routers.Unfortunately the 2811 routers have FXS ports with 2 - 4 POTS handsets - I completely forgot about these ports when I was ordering.Now I have VIC3-FXS cards which are ok in the 2911 but unfortunately I cant get them to work.I am missing PVDMs (well adapters anyway), and even if I got them the router wont take any commands relating to voice due to the license.Is is possible to 'rehost' the security and turn it into a UC ?I am new to these 2911 and Licensing.

View 1 Replies View Related

Cisco Switching/Routing :: IP Base To IP Service License Of 3750x

Dec 8, 2012

I am having a ws-3750x-12s-s  switch . I want to upgrade it from ipbase to ip service. after installing ip service liciense file, when i gave command " show license detail" i found there 3 index . one is for ip base -active (permanent) ..2nd is for ip service-active(permanent) 3rd  is again ip service but inactive( period 8weeks 2days) , then i cleared 1st one by giving command "clear ipbase" and reboot. but still 2 index .both for ipservice one is permanent-active another is inactive . so my question is how can i remove 2nd index which one is inactive and time period for 8weeks and 2days..?? becasue i don't need it. and it will make any problem in future ?

View 2 Replies View Related

Cisco Switching/Routing :: WS-X3750-24P-L For LAN To IP Base Upgrade License

Mar 26, 2013

Would like to ask what is the rigth SKU license for WS-X3750-24P-L for  LAN Base to IP Base Upgrade License

View 3 Replies View Related

Cisco Switching/Routing :: 3750 LAN To IP Base - Licensing Implications

Oct 29, 2012

I upgraded an image on 3750 from Lan base to IP base, it worked fine. howver im just wondering if there any licensing implications, did the upgrade a few weeks ago, would the switches still work on a temp license somehow?

View 2 Replies View Related

Cisco Switching/Routing :: 3750 Changing IOS From IP Base To Services

Feb 25, 2012

I have 3750 Switch and need to activate the ipservices on it , it is need a license file to switch from ipbase to ipservices , if i installed the ipservices image from cisco site , do i still need an activation  key to use it??

View 7 Replies View Related

Cisco Switching/Routing :: WS-C3560X-48P-L - Upgrade From LAN Base To Ip Services

Jul 5, 2012

I would I upgrade this from a LAN base to ip services?

View 2 Replies View Related

Cisco Switching/Routing :: 3750 - LAN Base License Limitations

Mar 3, 2013

I am bringing up a 3750x and a 2911 to replace a 3745 router with switchport module.  I was plannng on moving all the VLAN interfaces off the 3745 onto the 3750x and turning up EIGRP.  I discoved the 3750 has the LAN Base license, so I can't run eigrp off of it.  My question or worry now is, will the LAN base license prevent the switch from doing interface VLAN routing between the different VLAN's configured on it or will I have keep all the VLAN interfaces on the new router and just have a router on a stick setup?

View 4 Replies View Related

Cisco Switching/Routing :: 2960 LAN Lite / VLAN Number Max 64?

Jun 6, 2013

we have inserted into a network with VTP a Cisco Switch 2960-S, not knowing that had installed IOS LAN lite.Now I discovered that it can handle up to 64 vlan. In the network there are currently configured 62 VLAN: what happens when we exceeded the max number (64) of VLAN for that switch?

View 6 Replies View Related

Cisco Switching/Routing :: Static Load Balancing On 3650-X IP Base?

Nov 22, 2011

Does 3650-X IP Base support Static Load Balancing or i should upgrade to ip service SW ?

View 4 Replies View Related

Cisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?

Apr 9, 2013

What is the difference between IP Base and Universal for 3750X switches?

View 2 Replies View Related

Cisco Switching/Routing :: Is WS-SUP720-BASE Supported In 6509-E Chassis

Nov 29, 2010

I have a heck of a time finding this kind of information on the cisco site...Is the WS-SUP720-BASE line card a fully supported module in the 6509-E chassis?

View 4 Replies View Related

Cisco Switching/Routing :: 3750X / IP Base And IP Services Stackable Switches?

Aug 16, 2012

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?  

View 5 Replies View Related

Cisco Switching/Routing :: Block All DHCP Packets Through 2960S LAN Base IOS?

Mar 23, 2013

I am trying to block all dhcp packets through 2960S lan base IOS. But when i set no trust interface for dhcp snooping, the dhcp packet source port will be err-disabled.  Is there any other solution to block any DHCP packet through switch without interface or other service outage?Is possible to block DHCP packet through specific VLAN?

View 6 Replies View Related

Cisco Switching/Routing :: 3750X 12-SFP IP Base - Upgrade To IP Services Image

Jan 23, 2013

How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?

View 1 Replies View Related

Cisco Switching/Routing :: 6500-E VSS High CPU Utilization Process IOS-Base

Apr 18, 2012

we are using Cisco 6509-E VSS mode [12.2(33)SXI] ipbase image and facing high cpu utilization. In show process cpu output it is showing some "ios-base" process consuming cpu.  I attached show cpu output

View 1 Replies View Related

Cisco Switching/Routing :: WS-C3750X-48T-S / IP BASE Licensed Connected As Stack

Mar 15, 2013

I have two WS-C3750X-48T-S which is "IP BASE" licensed, which are connected as stack.I need to use Policy Based Routing (PBR) to direct Vlans to two different gateways, and command "ip policy route-map" which is supported only in C3750-IPSERVICES license.Do I need upgrade only master switch with Cisco IOS IP Services - product upgrade licenseMfg. Part#: L-C3750X-48-S-E, or both switches need to be upgraded?

View 20 Replies View Related

Cisco Switching/Routing :: 7600 Router Performance / Policy Base Routing?

Mar 6, 2012

When mutiple Policy based routing configured on 7600 routers, did the router performace degraded with the number of policy based routing rules?Also, did 7600 running 12.x use per-flow based routing or per packet based routing?

View 1 Replies View Related

Cisco Switching/Routing :: 3750X Static Routing When Running LAN Base?

Dec 27, 2012

I have a stack of 2 x 3750X switches these are running 12.2(55)SE5. I needed to add some static IP routes and found that the ‘ip routing’ command is not supported. I came across a document that stated “On switches running the LAN base feature, static routing on VLANs is supported only with Cisco IOS Release 12.2(58)SE and later.” So I have upgraded to 12.2(58)SE2, but ‘ip routing’ is still not a valid command.
The release notes state:“On the Cisco Catalyst 3560-X and 3750-X Series, it adds support for 16 static IPv4 routes in the LAN Base image.”
I have read other posts that talk about running the ‘sdm prefer routing’ command which I have done, but I am still unable to add any routes or run the ‘ip routing’ command.

View 4 Replies View Related

Copyrights 2005-15, All rights reserved