Cisco Switching/Routing :: WS-C3560X-48P-L - Upgrade From LAN Base To Ip Services

Jul 5, 2012

I would I upgrade this from a LAN base to ip services?

View 2 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 3750X 12-SFP IP Base - Upgrade To IP Services Image

Jan 23, 2013

How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?

View 1 Replies View Related

Cisco Switching/Routing :: 3750 Changing IOS From IP Base To Services

Feb 25, 2012

I have 3750 Switch and need to activate the ipservices on it , it is need a license file to switch from ipbase to ipservices , if i installed the ipservices image from cisco site , do i still need an activation  key to use it??

View 7 Replies View Related

Cisco Switching/Routing :: 3750X / IP Base And IP Services Stackable Switches?

Aug 16, 2012

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?  

View 5 Replies View Related

Cisco Switching/Routing :: 3750X Building IP Base And Services Stackable Switches

Jul 30, 2011

I'm building a wired closet to aggregate user's connections, Im planning to have 5x 3750X stacked switches and there is a need to run EIGRP, I'm thinking to order one switch with IP service image while the rest will run IP base image, is it workable scenario and what are the drawbacks of such combination of images ?

View 1 Replies View Related

Cisco Switching/Routing :: WS-C3750X-24T-L License For Supporting IP Base / Services Feature Set?

Jan 7, 2012

The model WS-C3750X-24T-L is only Lan Base. We need this switch to use EIGRP Protocol. Does it exist a License for supportting IP Base o IP Services Feature Set?

View 4 Replies View Related

Cisco WAN :: Configure And Use C3560X With IP Base?

Feb 2, 2011

Just bought this switch it has the IP base IOS and I need to use BGP and VRF-lite. My question is can I configure and use these two things without having to upgrade to the IP Services IOS?

View 5 Replies View Related

Cisco Switching/Routing :: 3750X-24T-S - Upgrade To IP Services?

Nov 9, 2012

C3750X-24T-S have IP base SW initialy. It is possible to upgrade IP services feature set? BGP routing is needed.

View 1 Replies View Related

Cisco Switching/Routing :: WS-X3750-24P-L For LAN To IP Base Upgrade License

Mar 26, 2013

Would like to ask what is the rigth SKU license for WS-X3750-24P-L for  LAN Base to IP Base Upgrade License

View 3 Replies View Related

Cisco Switching/Routing :: Upgrade Cat4506 With Sup7L-E Engine To Latest Ip Services Software

May 28, 2012

i need to upgrade my cat4506 with sup7L-E engine to latest ipservices software. link of suitable software and upgrade methode?

View 2 Replies View Related

Cisco Switching/Routing :: Feature Set LAN Base / Lite (2960) And LAN / IP Base (3650X)?

Mar 28, 2012

1)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:

LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
 
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?

View 2 Replies View Related

Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking

May 6, 2012

I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..

View 4 Replies View Related

Cisco Switching/Routing :: 2960 Switch LAN Base To IP Base

Nov 14, 2011

can we upgrade 2960 switch  from Lanbase IOS to IPbase

View 4 Replies View Related

Cisco Switching/Routing :: Option For WS-C3560X-48T-S

Jul 16, 2012

Im trying to find an affordable Cisco switch with similar capabilities and features as the WS-C3560X-48T-S (L2/L3 routing as in IP Base, dual power supply, etc.).

View 2 Replies View Related

Cisco Switching/Routing :: C3560X-24T-S And SFP-10G-ER - No Link

Jul 31, 2012

I got a pair of new C3560X-24T-S switches with C3KX-NM-10G modules, and am trying to get a long distance 10G link up using 3rd party SFP-10G-ER SFPs (XGIGA with Cisco coded IDPROMs)I've enabled use of unsupported transcievers with the following commands:service unsupported-transceiver no errdisable detect cause gbic-invalidAfter that the switches accepts the SFPs but I get no light (sh int trans shows Tx -40), but if I insert a supported SFP first and then switches to my ER SFPs I get them to start transmitting, however I still don't LINK on the interface.I've tried with both 12.2(55)SE3 (that the switches came with) and 15.0(1)SE3 with same results.I know SFP-10G-ER SFPs are not supported on these switches, but are scheduled for the 15.0(2) release, but I was under the impression that they should already work using the above commands to enable the use of unsupported SFPs.So my question is basically: Is the new code in 15.0(2) really needed to make ER SFPs work, so I should just wait for that release, or are my 3rd party SFP simply broken/un-compatible with these switches?Also, could reprogramming them to look like SFP-10G-LR SFPs, which are supported, make any difference, or should it already have worked now with service unsupported-transceiver enabled if they were compatible?

View 5 Replies View Related

Cisco Switching/Routing :: Can Stack C3560x To C3750g

Jan 11, 2012

Currently there are three stacked WS-C3750G-24TS-1U on data centre. I am going to buy a WS-C3560X-48T-L to use 10GbE module. Is it possible stack this switch "WS-C3560X-48T-L" to current switches "WS-C3750G-24TS-1U" ?

View 1 Replies View Related

Cisco Switching/Routing :: Getting Configuration For C3560x And UC520

Sep 9, 2012

Let me start with some infrastructure details ...
 
Cisco C2901 as our Main Router
Cisco UC520 as Communication Platform
Cisco C3560x as Core-Switch
 VLAN 10 : Data
VLAN 100 : VOICE 
 
Everything is working but i m not sure if the switchport config is right in that way.
 
As an example :
 
interface GigabitEthernet 0/6
switchport access vlan 10
switchport mode access
switchport voice vlan 100
spanning-tree portfast
 
When we connect an Cisco 7971g and an pc everything is working fine. But when i start wireshark on the pc behind the phone you see a lot of UDP Traffic source UC520 destination 239.10.16.8 or 239.10.16.16. At this point i m getting confused. So i start looking for the cisco phone config, VLAN ID on the phone is 100 (i think that is ok) but the PC-VLAN part is empty?
 
The main thing is, how can i stop this cisco-sccp traffic on the pc port (prtg shows me a average of 200 kbit/s) i think it is an config fault.

View 4 Replies View Related

Cisco Switching/Routing :: Power Disconnection With WS-C3560X-24P

Feb 17, 2013

I have a Switch model WS-C3560X-24P with SW Version 12.2. (55) SE5 and SW Image C3560E-UNIVERSALK9-M. Now I get messages from 3 ports that:% ILPOWER-5-IEEE_DISCONNECT: Interface Gi0/12: PD removed. The strange thing is that there is nothing connected to these ports and they are like "notconnect»
 
An excerpt of the log looks like this:

1469058: Feb 18 09:08:33.945 CET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi0/12: PD removed 1469060: Feb 18 09:08:49.279 CET: %ILPOWER-5-POWER_GRANTED: Interface Gi0/12: Power granted 1469061: Feb 18 09:08:50.310 CET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi0/12: PD removed 1469063: Feb 18 09:09:02.280 CET: %ILPOWER-5-POWER_GRANTED: Interface Gi0/12: Power granted 1469064: Feb 18 09:09:03.413 CET: %ILPOWER-5-[Code]....

View 5 Replies View Related

Cisco Switching/Routing :: C3560X Status LED Not Working Properly?

Dec 12, 2011

I have recently installed 4 3560 (WS-C3560X-48T-S) Switches. At first the switch comes up, indicating all connected ports with a green LED. Whenever i unplug a cable and plug it back in, the status LED will stay off. The same thing happens when I push the mode button and cycle throgh the different modes, i lose certain LEDs.
 
I'm using 12.2(53)SE2, another user reported the same issues under 12.2(55)SE1 .

View 4 Replies View Related

Cisco Switching/Routing :: Does WS-C3560X-24P-S Switch Supports Ip Flow Export

Jan 19, 2012

Does the Cisco WS-C3560X-24P-S switch supports ip flow export?

View 1 Replies View Related

Cisco Switching/Routing :: WS-C3560X-24 Reboots - No Crash File And Clean Logging After Reboot

Apr 24, 2013

I have a WS-C3560X-24 and attached to that are some 9 acces switches, for some weeks now my 3560 reboots some time what couse that the other 9 switches are down for some minuts as well and i dont want this of course. the reboot happens at random times and some times one week not and then like yesterday afternoon it rebooted again.
 
when i check the Flash directory there is no crash file and when i look at the logging its clean and just shows the startup. it's not the powersuply it's redundend and more L3 switches are attached to this power source and they dont reboot.
 
L3_AIM#sh versionCisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2011 by Cisco Systems,

[Code]......

View 3 Replies View Related

Cisco Switching/Routing :: 7600 Router Performance / Policy Base Routing?

Mar 6, 2012

When mutiple Policy based routing configured on 7600 routers, did the router performace degraded with the number of policy based routing rules?Also, did 7600 running 12.x use per-flow based routing or per packet based routing?

View 1 Replies View Related

Cisco Switching/Routing :: 3750X Static Routing When Running LAN Base?

Dec 27, 2012

I have a stack of 2 x 3750X switches these are running 12.2(55)SE5. I needed to add some static IP routes and found that the ‘ip routing’ command is not supported. I came across a document that stated “On switches running the LAN base feature, static routing on VLANs is supported only with Cisco IOS Release 12.2(58)SE and later.” So I have upgraded to 12.2(58)SE2, but ‘ip routing’ is still not a valid command.
 
The release notes state:“On the Cisco Catalyst 3560-X and 3750-X Series, it adds support for 16 static IPv4 routes in the LAN Base image.”
 
I have read other posts that talk about running the ‘sdm prefer routing’ command which I have done, but I am still unable to add any routes or run the ‘ip routing’ command.

View 4 Replies View Related

Cisco Switching/Routing :: Does LAN Base IOS Support SSO In L2 4507?

Apr 26, 2012

We will deploy several 4507 with 2xsup7 as a L2 access switches for our office.Does LAN_Base IOS version support SSO or we need purchase IP_Base IOS (L3)?

View 1 Replies View Related

Cisco Switching/Routing :: 3750X IP Base IOS Feature Set?

Oct 26, 2011

I have been looking to find out the list of features that the IP Base IOS has for the 3750X series switch.  What would be ideal is a comparable list but essentially I need to know which of the LAN Base/IP Base/IP Services has SSH functionality. 

View 1 Replies View Related

Cisco Switching/Routing :: 3750x 12.2-55.SE3 IP Base Feature Set?

Sep 9, 2012

Full feature set for IP Base with the 3750x.I just wanted to verify that I could create a routed port, turn ip routing on, and create static routes as well as a default route. From what I can find, there shouldn't be a problem with this on the IP Base Feature Set, I just wanted to verify. Or any link for the Features of IP Base on the 3750x.

View 3 Replies View Related

Cisco Switching/Routing :: Catalyst 3560-X IOS 15.0(2) IP Base?

Nov 29, 2012

We have observed increase of CPU utilization of 50% after upgrade from 15.0(1)SE3 to 15.0(2).The SDM template is  "desktop default" template.The increase of CPU utilization in Switches with LAN Base after upgrade is about 10%.
 
How to find the cause for the 50% increase ?This is command is the output of 15.0(2). The calculated sum for 5min process-utilization is 21% plus 1% interrupt is 22 %. Where is the rest ?
 
switch#sh proc cpu  sorted 5min | exc 0.00
CPU utilization for five seconds: 30%/1%; one minute: 29%; five minutes: 28%
PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
169   135084171    33273787       4059  9.92%  8.94%  8.73%   0 Hulc LED Process
  83    80075989    13546109       5911  5.60%  5.39%  5.38%   0 RedEarth Tx Mana

[code].....

View 17 Replies View Related

Cisco Switching/Routing :: 3560 - LAN Base On 3560X

Nov 1, 2011

why Cisco make 3560x switches with Lan Base(no routing functions)? What happen if I load an Image  L3, previously downloaded?    my device lost the warranty? or it doesn matter?

View 1 Replies View Related

Cisco Switching/Routing :: Upgrading 3560x To IP Services

Oct 12, 2012

It would be so easy but failed to upgrade 3560X switch to ip services licence is bought and paid for mail and log from the CLI and tftp server attached

View 17 Replies View Related

Cisco Switching/Routing :: 2911 Router With Base And Security

Feb 12, 2013

We have purchased a number of 2911 routers.We got Base & security license as we wanted to enable encryption. However we probably wont use the security.We are replacing 2811 routers.Unfortunately the 2811 routers have FXS ports with 2 - 4 POTS handsets - I completely forgot about these ports when I was ordering.Now I have VIC3-FXS cards which are ok in the 2911 but unfortunately I cant get them to work.I am missing PVDMs (well adapters anyway), and even if I got them the router wont take any commands relating to voice due to the license.Is is possible to 'rehost' the security and turn it into a UC ?I am new to these 2911 and Licensing.

View 1 Replies View Related

Cisco Switching/Routing :: IP Base To IP Service License Of 3750x

Dec 8, 2012

I am having a ws-3750x-12s-s  switch . I want to upgrade it from ipbase to ip service. after installing ip service liciense file, when i gave command " show license detail" i found there 3 index . one is for ip base -active (permanent) ..2nd is for ip service-active(permanent) 3rd  is again ip service but inactive( period 8weeks 2days) , then i cleared 1st one by giving command "clear ipbase" and reboot. but still 2 index .both for ipservice one is permanent-active another is inactive . so my question is how can i remove 2nd index which one is inactive and time period for 8weeks and 2days..?? becasue i don't need it. and it will make any problem in future ?

View 2 Replies View Related

Cisco Switching/Routing :: 3750 LAN To IP Base - Licensing Implications

Oct 29, 2012

I upgraded an image on 3750 from Lan base to IP base, it worked fine. howver im just wondering if there any licensing implications, did the upgrade a few weeks ago, would the switches still work on a temp license somehow?

View 2 Replies View Related

Cisco Switching/Routing :: 3750 - LAN Base License Limitations

Mar 3, 2013

I am bringing up a 3750x and a 2911 to replace a 3745 router with switchport module.  I was plannng on moving all the VLAN interfaces off the 3745 onto the 3750x and turning up EIGRP.  I discoved the 3750 has the LAN Base license, so I can't run eigrp off of it.  My question or worry now is, will the LAN base license prevent the switch from doing interface VLAN routing between the different VLAN's configured on it or will I have keep all the VLAN interfaces on the new router and just have a router on a stick setup?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved