Cisco Switching/Routing :: Upgrade Cat4506 With Sup7L-E Engine To Latest Ip Services Software
May 28, 2012i need to upgrade my cat4506 with sup7L-E engine to latest ipservices software. link of suitable software and upgrade methode?
View 2 Replies
ADVERTISEMENT
Cisco Wireless :: MSE 3310 Upgrade 7.0.201.204 Failing Mobility Services Engine Software
May 11, 2011I am trying to upgrade an MSE from version 6 to 7.0.201.204. I am able to copy across all the files and have tried using WCS and FTP for the CISCO-MSE-L-K9-7-0-201-0-64bit.bin file but the installation procedure always fails.
I will download all the images again tonight. Is there a way to delete the images from the /opt/installers/ directory?
Also the upgrade procedure in the 7.0.201.204 is pretty bad, there is no detail in any of the steps.
Here is output from the upgrade -
[root@SDC-MSE-01 installers]# dirCISCO-MSE-L-K9-7-0-201-0-64bit.bin database_installer_part3_4.zipdatabase_installer_part1_4.zip database_installer_part4_4.zipdatabase_installer_part2_4.zip
[Code].....
Cisco Switching/Routing :: 6509 Sup Engine 32 IOS Upgrade Via USB
May 14, 2013I would like to find out how to upgrade SUP engine 32 via USB port as I've never did IOS upgrade on a SUP engine via USB before
View 5 Replies View RelatedCisco Switching/Routing :: 4500 - Upgrade To Latest IOS
Feb 29, 2012I want to upgrade to the latest IOS for a client of mine. My client has the following image: cat4000-i5k91s-mz.122-25.EWA14.bin
His hardware specifications are as following:
cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory.
Processor board ID FOX102203CC
MPC8245 CPU at 400Mhz, Supervisor V
Last reset from Reload
5 Virtual Ethernet interfaces
152 Gigabit Ethernet interfaces
[Code]...
Cisco Switching/Routing :: 2960 S - Upgrade To Latest IOS Version
May 30, 2013I am going to upgrade a number of catalyst 2960s-switcher to the latest IOS- version. The best solution for me would be if all the switches could be reloaded at the same time to shorten the maintenance-windows. So my question is: If I run the upgrade (archive down load -sw) before the maintenance-windows WITHOUT the reload-option, will then the switches continue to run without interruptions with the current IOS- version and config until I run reload manually?
View 3 Replies View RelatedCisco Switching/Routing :: Router Upgrade 2811 To Latest Version
Aug 22, 2012I upgraded a 2811 router to the latest version and apparently everything went smooth. I reloaded and did a sh ver the IOS show the correct version, but the boot strap shows the old IOS. How can I change the boot strap to show the new IOS.
View 4 Replies View RelatedCisco Switching/Routing :: 3750X-24T-S - Upgrade To IP Services?
Nov 9, 2012C3750X-24T-S have IP base SW initialy. It is possible to upgrade IP services feature set? BGP routing is needed.
View 1 Replies View RelatedCisco Switching/Routing :: WS-C3560X-48P-L - Upgrade From LAN Base To Ip Services
Jul 5, 2012I would I upgrade this from a LAN base to ip services?
View 2 Replies View RelatedCisco Switching/Routing :: 3750X 12-SFP IP Base - Upgrade To IP Services Image
Jan 23, 2013How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?
View 1 Replies View RelatedCisco Switching/Routing :: Cat4506 Chassis With Cat2955 - Network Expansion
Mar 1, 2012Currently I have a Cat4506 chassis with a Sup II+ engine and one WS-X4232-RJ-XX linecard with the WS-U4504-FX-MT daughtercard to provide uplinks to four Cat2955 switches. I chose the Cat2955 because the switches are in an industrial facility and they fit the envrionment very well. Each of them has a multimode fiber uplink.
The issue I have now is that I need to add at least 4 more Cat2955 switches to the topology and find that the x4232 is EOL. I can always find a used one somewhere, but is there another currently shipping linecard that will do the trick? I see there is WS-X4248-FE-SFP with the 100BaseX interfaces, but don't really need 48 ports, just 8.
Is there another linecard that can downswitch a 1000BASE-X port to 100Base-X, or can I use a 100Base-X SPF in a switch like the WS-X4448-GB-SFP?
What are my options, aside from buying another X4232?
Cisco Switching/Routing :: Get Back-plane Load Of Cat4506-e Chassis With Sup6-E Supervisory Card
Jan 15, 2012A customer wants to get the back-plane load of a cat4506-e chassis with a sup6-E supervisory card.A would like to check how many bus are used on the backplane and if the command "sh envi chassis" is the good and only command to be used ?I'm not sur that there is only one bus on the cat4506-E as with a sup7 card the backbone speed can change.
View 2 Replies View RelatedCisco :: Identity Services Engine (ISE) Support For WLC 2500?
Dec 5, 2011Is the ISE going to support the 2500 series Wireless LAN Controller WLC? If yes in what release and appriximately when is that due to be released?
View 1 Replies View RelatedCisco Switching/Routing :: Datasheet Of WS-X45-SUP7L-E
Sep 5, 2011Any information on supervisor WS-X45-SUP7L-E? I saw that it has 520Gbps of backplane, but does it supports Netflow? How many uplink does it has?
View 6 Replies View RelatedCisco Switching/Routing :: Correct Way To Lic VSS On 4500 SUP7L-E
May 13, 2013What is the correct way to lic VSS on a 4500 SUP7L-E ? url... Under Table 5 - Support by Image Type; VSS is listed as available on IP Base (SUP7E only) and a plain Yes under Enterprise Services, inferring that you need Enterprise Services lic on SUP7L-E to get VSS? url...Under Table 1 - Minimum License for VSS; IP Base or higher (7-E) or special license (7-LE and Catalyst 4500-X)Can find no option on CCO / configuration tools to list a 'special' VSS license for 4500R+E chasiss with dual SUP7L-E and IP Base.How are you meant to purchase/license VSS on 4500E Chassis + SUP7L-E ?
View 6 Replies View RelatedCisco Switching/Routing :: Sup7L-E - How To Select 1-Gigabit Operation
Aug 23, 2012Documentation discusses "1-Gigabit Operation", where all 4 1-Gig SFP's on Sup7L-E are enabled. But it does not say __how__ to select either 10-G or 1-G operational modes.
View 3 Replies View RelatedCisco Switching/Routing :: SUP7L-E Support For Shared Backplane Mode
Feb 6, 2012Are there any plans to support a "shared backplane mode" like on SUP6-E that enables the use of four 10G oversubscripted uplink ports in redundant mode? now there is support for up to two active 10G links in redundant mode.
View 2 Replies View RelatedCisco Switching/Routing :: 4500E SUP7L-E Shows Error In Log After Upgrading
May 14, 2012I upgraded IOS-XE on 4500E (SUP7L-E) to cat4500e-universalk9.SPA.03.03.00.SG.151-1. I encounter the log when i try to issue write mem commad
% VRF table-id 0 not activeCompressed configuration from 8947 bytes to 2140 bytes[OK].
Cisco Switching/Routing :: Core 4506 / Difference Between Sup7 And Sup7L?
Aug 17, 2012I will go to buy a core 4506 but I'm comfusing about the Sup engines and the Fiber module. What is the different between the Sup7 and Sup7L?in the fiber module that I will go to buy is it contain the SFP inside or I have to buy the SFP ( WS-X4612-SFP-E ). also what is the different between the SFP and GBIC?
View 4 Replies View RelatedCisco Switching/Routing :: 4507 SSO Mode Sup7L-E 10GbE Interfaces
Dec 9, 2012What is the case with redundant Sup engine 10GbE interfaces. We can only get one in active state, the other interface stays inactive? Can we have all four interfaces active sharing the backplane?
Mod Ports Card Type Model
---+-----+--------------------------------------+------------------+-----------
3 6 Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7L-E
4 6 Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7L-E
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor SSO Active
4 Standby Supervisor SSO Standby hot
Cisco Switching/Routing :: Interface Numbering Plan On CAT4500E With SUP7-E Or SUP7L-E
Feb 1, 2013We are planning for the first installation of 4500 switches containing these supervisor modules. I'm trying to determine the interface numbering convention for ports on the supervisors. Our existing 4500E all have SUP6 modules with twin-gig converters - so I am familiar with the numbering conventions used on those supervisors. How does this change with the software based selection command "hw-module uplink select" used in SUP7?
View 2 Replies View RelatedCisco Switching/Routing :: SFP-H10GB-CU5M Cable To Connect SUP7L-E To C3KX-NM-10G On 3750X
Oct 23, 2012know if it is supported connecting the SUP7L-E 10GE ports to a C3KX-NM-10G, using a SFP-H10GB-CU5M (or shorter).
View 3 Replies View RelatedCisco AAA/Identity/Nac :: WLC-2500 / Profiling In Identity Services Engine 1.1?
Apr 18, 2012how profiling works exactly ?How intelligent is the profiling engine, meaning: Will it discover that one device has more than one different MACs and will merge the entries in the database ??
Example:This is in fact the same device, there is only one WLC-2500 in the network ....If it can discover that, what needs to be configured on the ISE to do that ?
Cisco Switching/Routing :: 4506 - Upgrading Sup V To A Sup 7 Engine
Jan 4, 2013I am currently running a 4506 with a sup V engine. I have purchased a sup 7 engine. Is there a guide on how to perform this task. I am sure I need to do an IOS update as well.
View 2 Replies View RelatedCisco Switching/Routing :: Supervisor Engine 720 Errors
Apr 18, 2013i have a standalone SUP720, no traffic is passing through it. only one port connected for remote telnet, its kind of backup device.today i checked its log, and there are some wiered message.is it a software bug or my SUP has gone bad? [code]
View 24 Replies View RelatedCisco Switching/Routing :: Adding New SUP Engine To 6509?
Jan 1, 2013I have recetly upgraded our core switches (6509E) to SUP 2T from 32. Each core has 2 SUP's (hot/standby). out of 4 SUP engines, one is defective. i had received the new SUP from cisco. Currently my core swicth 2 is running with single SUP. Can i directly insert the new SUP engine in slot 6 (free)? will it automatically load the existing IOS from active SUP? what will happen if the new SUP has a different IOS other than the active SUP? Also is there a way to find out the IOS version without inserting in the chasy?
View 2 Replies View RelatedCisco Switching/Routing :: VSS With 4 Supervisor Engine 2T-10GE
May 6, 2013We have a scenario with 2 chassis, both with 2 supervisor Engine 2T, we try to make a configuration of VSS with the chassis and would link to know if is possible have 2 supervisor on chassis one and 2 supervisors on chassis 2 with VSS?
Router#sho switch virtual redundancy
My Switch Id = 1
Peer Switch Id = 2
Last switchover reason = active unit removed
Configured Redundancy Mode = sso
Operating Redundancy Mode = sso
[code]....
would like to use the second supervisors for obteind the local redundancy en chassis 1 and 2, this is possible?
the actually version on four supervisors is: s2t54-ipservicesk9-mz.SPA.150-1.SY3.bin
Cisco Switching/Routing :: 4500 Sup Engine 7L - EIGRP?
May 13, 2012We recently perchaced 4503 switch with Sub Engine 7L. It has universal IOS. We are unable to run EIGRP and HSRP protocol and the switch came with temporal license.how to proceed further to get EIGRP and HSRP enabled on the 4503 switch.
View 8 Replies View RelatedCisco Switching/Routing :: What Is The Latest Firmware For 1841
Dec 28, 2011what is the latest firmware for cisco 1841 ? is firmware and router IOS image are same ?
View 1 Replies View RelatedCisco Switching/Routing :: 5505 Latest OS Version - 9.0.2 Or 9.1.1?
Apr 23, 2013On the downloads page there's a 9.0.2.ED listed as the 'latest' but then if I expand the '9' below it I get to 9.1.1.ED. Which one is the actual latest? is there any way to tell the one that is not an 'interim' version I think 9.1.1 is also listed under interim?
View 4 Replies View RelatedCisco Switching/Routing :: 6509 How To Configure VSS With Two Different Supervisor Engine
Oct 1, 2012I have configured the VSS in two cisco 6509-E series with only one supervisor engine, but if i configured with two supervisor engine. it is going to common mode. One supervisor engine is 3c and 3cxl.
View 2 Replies View RelatedCisco Switching/Routing :: Upgrading Supervisor Engine On 4006?
Nov 3, 2011I have an older 4006 with a Supervisor II+. We now need OSPF support, which the Sup II+ does not provide. I have access to a Supervisor III (WS-X4014), which will provide OSPF support. Question is, are there any gotchas to shutting down the switch, replacing Supervisor Engines and then powering up? What about the flash card? On my current system, it appears that I am only using bootflash: , which is where the IOS resides (see below). Since my startup config is in nvram and my IOS is in bootflash, what's the purpose of the flash card in slot0: ? and where does NVRAM and bootflash actually live on a 4006 ( on the Supervisor Engine?)
sh bootvar
BOOT variable = bootflash:cat4500-ipbase-mz.122-31.SGA11.bin,1;,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
[Code].....
Cisco Switching/Routing :: Catalyst 4006 Supervisor Engine Led Red
Nov 28, 2011we got a problem with our cat4006 coreswitch. The led on the supervisorengine is red, and several errors are appearing in the message log. [code]
View 1 Replies View RelatedCisco Switching/Routing :: Secon SUP Engine On 4507R Switch?
Mar 8, 2012I need to add another SUP engine on Cat 4507R switch, with a new one. I have old SUP engine running in this switch. Sometime this switch is reloaded without any reason. So we want to add another sup engine for redundancy. What is the procedure to do this & also how much outage time would it cause? Which sup engine will be run as primary and which one should be redundancy?
SWITCH-4507#sh ver
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version
12.2(25)EWA8, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 24-Jan-07 15:28 by pwade
[code]....
