Wireless Adapter Work On Extreme-Z Mobo?
Aug 30, 2011Some guy from COMPusa gave me the pci version which didnt work.... so erm yeah.ill this pci-e version do the trick on my Extreme-z mobo?
View 1 RepliesSome guy from COMPusa gave me the pci version which didnt work.... so erm yeah.ill this pci-e version do the trick on my Extreme-z mobo?
View 1 RepliesWhen I wake up my pc after standby there is for ~ 5 sec on internet. Looks like it needs to reconnect to the internet.My old pc didn't have this issue and immediately had internet.I have a MSI Z77 GD-65 mobo and internet through an Ethernet cable.
View 2 Replies View RelatedI purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies View RelatedI can't get a wireless adapter to work on my newly purchased desktop. Tried 2 different brands, same result: After installing drivers, resetting wireless router etc. the wireless connection sometimes shows up but can't be connected to. I used:
1) TP link wireless adapter
2) Netgear N600 wireless dual band usb adapter.
The netgear one I'm using right now just says, "scanning" constantly. Here's diagnostics:
Host Name: MININT-SNNBPV2
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
[Code]....
I own a dell demension 8300 OS Windows xp Professional. What would be a compatiable wireless adapter for my desktop pc?
View 1 Replies View RelatedI have cable to connect to internet, and recently bought a Bluestork Wireless n usb adapter of 150 mbps, however when trying to connect to this wifi that appears onmy tablet it asks for a password, but I don't know what the WEP or WPA is.
View 1 Replies View RelatedI have a E1000 N router and I was wondering if I can connect a G wireless adapter to it. I am trying to connect it with my Sanyo LED HDTV, it has the port for a USB but I can't seem to get it to connect. I've tried manually setting it up but I seem to have done it wrong. The reason for trying to connect to the television is Netflix. I learned that you can watch it instantly on your Tv, using the Blue-ray or a basic internet connection. The Blue-ray I currently have is not an acceptable brand, so I am trying the basic internet connection.
View 1 Replies View RelatedSeems like there those saying they have gotten there DIR-655 and XBOX 360 Wireless N Adpater to work in 802.11n mode. The adapter will only connect in 802.11g mode (and yes I have the correct adapter). I have set the settings to following
802.11 Mode: Mixed 802.11n and 802.11g
Wireless Channel 2.462 ghz - Ch 11
Transmission Rate Best
Channel Width 20/40
WPA-Personal
WPA2 Only
Cipher Type: AES
Does this router really work with XBOX 360 Wirelss N Adapater. If so, how has others got this to work.
I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies View RelatedI'm working on an M5030 that has a red X on the wireless and will not find any networks.
- The ethernet connection WORKS
- The fn+f2 wireless switch combo seems to do nothing
- I've updated the bios
- I've uninstalled and installed the latest driver
- I've installed external USB wireless adapter but it has same issue
- I've scanned for malware, all clean.
When I go to network adapters it has signal bars on the wireless adapter but when I right click -> connect disconnect -> nothing shows as available. If I diagnose, it just says there may be a problem with the wireless adapter. I've tried DISABLING ZoneAlarm firewall to no avail also.
I have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View RelatedI'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies View RelatedCurrently getting constant disconnects with the following hardware/software
Modem CM100
Router - Tried 4 different routers, issue consistent throughout them all. Original is the Asus RT-n56u.
Realtek PCIe GBE Family Controller
MSI 790XT-G45
Windows 7 Ultimate
After installing several drivers and probably 10-20 tweaks, the issue has stopped for about 50 minutes after consistent at least every 10-20 minutes.I actually just placed an order for a Motorola Surfboard 6121 Although I need the upgrade anyway.
So I can't seem to get anything to work lately... Sad that I can't even get a wireless adapter running now...
So this is a new Wireless-G Notebook Adapter(WPGC54G v1.2) I just got in the mail today. I went to the linksys/cisco website and they only have version 1, 2, 3, etc. Mine says 1.2 so I tried version 1. After installing and following all steps it said the software that connects was inactive.
After searching the internet a bit I found a thread stating v1.2 is version 2. So, I downloaded version 2 and ran that. Now the software isn't inactive but it doesn't "connect" in the linksys software, show any wireless devices, or do anything. I went into device manager and found the wireless card, updated drivers manually, and selected the folder I downloaded from linksys website to search for update drivers. It all ran fine and said drivers were installed. Still won't work. LINK light is not on card, POWER is.
Using a Toshiba Tecra 9000. So my last attempt... I uninstalled everything and stuck the card in and let windows recognize it. Selected manual install, went to the folder I downloaded for ver. 2 to search for drivers. Said everything installed and did drivers successfully but windows says "wireless network unavailable."
I have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies View RelatedI finished building my pc, i booted it up installed windows.Then i installed my drivers of my mobo like i'm supossed to, however my internet wont turn on/detect anything.i am however conected to the internet on my iphone and my laptop, i reinstalled my os/ reinstalled all drivers..
View 1 Replies View RelatedI have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"
But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).
Airport Extreme Internet Connection via USB port?
View 1 Replies View RelatedI have had this computer for about 3 years and it crashed during a storm but when I reset the bios and reinstalled windows it worked again but now I can't get the LAN adapter to light even while cord is in there and I can't get my router to say it's connected to my pc and it says the cat5 cable isn't hooked to my computer but I know the cable works. I'm running windows vista home premium. I try to type in ipconfig/all and it says media disconnected
View 17 Replies View Relatedim using a laptop with built in wireless adapter and it connects to my router but the connection appears to be very weak because i often get disconnects and the taskbar shows me having only one or two bars(im using windows 7). My roommate's laptop connects to it with max bars. So, i got my old usb adapter, which works fine on my desktop(i tested it), and it cant make the laptop use the adapter instead of the built in wireless adapter. I have tried disabling the built in adapter and it just tells me that i cannot connect to the internet. The usb adapter is enabled but it has a red X on the side of the picture.
View 6 Replies View Relatedi recently bought a wifi adapter capable of 300mbps, as apposed to my old 54mbps adapter, and an active 10m extension.
now the extension does power the adapter, but the cpu doesnt seem to recognize the adapter is plugged in, but if i plug the adapter straight into the computer then it all works fine.
other people seem to have no problem at all doing this to achieve better signal.
[URL]
I have this USB Wifi adapter: NETGEAR WNA3100 [URL] I just bought it and thought it would work, but apparently it is def a Windows 7 problem because I have tried it with these others USB adapters only. My main objective is to create a hotspot for the house wirefree and no triping etc etc
Airlink+ 802.11g 2.0 (old) Works with XP but not on W7 (blinks)
WifiMAX Dongle 802.11g 2.0 (also old) (Sometimes blinks at intervals)
TrendNET TEW-644UB (bought last year) (Light stays on/no longer blinks)
Netgear WNA3100 (arrived just a few hours ago) (I made it blink now with its software)
I have tried(netgear):
-rebooting
-installing/uninstalling drivers
-uninstalling itunes
-Using a W8 procedure for it
-tried using different software
-Some other stuff
I have not tried a HKEY codes for it My biggest problem is that the "Disabled" status is stuck and I cannot re-enable it. If there is a way to override this I would be happy to hear it. Using: Windows7 Ultimate Gigabyte Motherboard/AMD chipset For the only one that is enabled(Airlink) it has some funny stuff on the status like 412 Gbps and doesn't have ipv4/6 connectivity [URL]
I have a Dlink Wireless N Xtreme DIR-655 I have run out of port 4 on it to a switch with a cat 5 patch cable that is 25 ft long It is connected to the Internet port on a Dlink 4 port switch. When i run from that on any of the 4 ports back to my computer ( Win7). I get no internet access but if i connect the cable straight from the router there is no problem. I even attempted to use a older dlink router for the switches and no luck there at all. Any reason the internet would not be broadcasting through the switch.
View 3 Replies View RelatedI have a P5QL-E and i cant get this network adapter to work. I enabled it in BIOS, but nothing happens in win7, driver says i dont have any device isntalled.
View 3 Replies View Relatedi have a hp cpu and i want to use my Clear wfif to connect to the internet. I was told that I need an adapter for a CPU to use the Clear signal. I was told that the wifi is really for laptops with built in adapters that cpu's don't have. best adapter to use for my application.
View 1 Replies View RelatedU have this AWUS036H adapter. and I bought this antenna but it doesn't work with my adapter, not antenna, not even base of antenna.
View 6 Replies View RelatedI had been using my Linksys wireless-G PCI adapter WMP54Gv4 in a PC running XP (SP3) and an Airport Extreme wireless router for the past 4 or 5 years without any issues. Then recently, my wireless signal had become flaky on all client machines (on both PC and various Macs, which reported weak signal and kept dropping and searching for a new PPPoE from my DSL line). AT&T verified our line was fine and even sent a new modem but troubles persisted, so I bought a new Airport Extreme last week. This solved the network reliability issue on the Macs just fine.
However, the PC with the WMP54Gv4 adapter now crashes whenever the new Airport Extreme is turned on. There have been no hardware or software changes on the PC, yet it now reliably produces a BSOD stating "DRIVER_IRQL_NOT_LESS_OR_EQUAL". This crash also happens when booting in safe mode with networking. I can avoid the system crash when booting in safe mode without networking or booting normally without my Airport Extreme turned on, though I do see this error: "Linksys Wireless Network Monitor: Access violation at address 0040756D in module EMP54Gv4.exe"
So I cannot run any tests of the PCI card on the machine when the wireless network is on, since the operating system crashes.
The evidence thus points to an explanation where my wireless network from the new Airport Extreme is tripping up the operation of the linksys wireless card in a way that XP hates. I know the wireless network is OK, since it works fine on my Macs. I confirmed that my driver (v3.0.3.0) is still listed as current for this PCI card, so it's not a matter of having an out-of-date driver.
Here's another observation that may be relevant: When I first started using the new Airport Extreme with WPA2 protection, the PC could run without crashing, but it could not connect to the wireless network. I also had trouble connecting via my Macs. Then I switched the Airport Extreme to use WPA/WPA2 security, which is when the network-based PC crashing ensued (though the Macs can now connect just fine).
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies View RelatedFor the past year my wireless has been working great and I have being playing games/doing homework with no hassle. Yestetday my internet connection became very slow. After countless restarts, router/modem resets nothing has changed and I only get like 5kb of download speed. Since my internet connection was lost naturally I unplugged the wireless card and re-plugged it, didn't change anything. After that I restarted my computer, but nothing changed. AFTER THAT I unplugged my router, then reset my router to factory settings, which did not change anything. Since everything was backed up I thought I would reinstall Windows 7 to nuke any hidden problems. After 2 reinstalls of Windows 7, nothing has changed. Next I had Comcast reset my connection with them which did not work. Though it did work with my brothers desktop. After some more time just fiddling around my connection went back to lightning speeds. no.....4 hours later my connection went dead.At all times my computer will see my network but it either will not connect to it or it is really really slow now.
Computer info: Apple Airport Extreme router Hawking HWUN3 Wireless USB ASUS P6T Motherboard
I've recently purchased an E4200, and while it works great, I'd like to use my Apple Airport Extreme (2nd generation) to extend my network to another part of the house that doesn't get as great of a signal. I've become very frustrated trying to accomplish it, and I'm not sure if the problem is more from the Linksys end, the Airport end, or if it's just me.
View 3 Replies View RelatedI have a E4200v2 i also have a Airport Extreme I want to use this to extend my wireless range in my house? I've played around a little tring to configure the Airport extreme but can't seem to get it to connect to my E4200v2? Can you mod the Airprt Extreme with dd-wrt or something that might unlock some of the features?I can't stand the interface. The E4200v2 is brand new.
View 1 Replies View RelatedI have an airport extreme router connected in my basement. My family room Ethernet connection is connected directly to the airport extreme. I can access the internet by Ethernet in the family room just fine.What I want to do is use a WRT31N as a switch in my family room so I can connect Mulitple Ethernet devices to the network. I'm having a hard time doing this. How to set up the linksys router? The airport extreme ip address is 10.0.1.1. I tried setting the linksys to 10.0.1.2 and turning off dhcp, but didn't work.
View 1 Replies View RelatedI have an HP W7 (Home Premium) PC.
I have a wired connection (on-systemboard network interface) to a Belkin 54g router, but the router is not physically connected to the internet (no ethernet cable out to a cable modem/whatever). The router connects several necessary peripherals - mostly wirelessly to the main PC and another W7 PC.) All this stuff worked prior to a move to a new location.
There is freely accessible Wifi in range (public library - wherein I could concievably carry the whole PC and use their WiFi with their blessing).
I attached a USB Wifi adapter to the PC to avail myself of the free service, but W7 will not allow the Wifi adapter to be seen until I detach the ethernet wire. Then it will allow me to see the available network, and connect.
How does W7 (or the system board) look at network? Are they (onboard NIC and USB) mutually exclusive? Do I need a separate ethernet adapter card or a separate USB adapter card to create a different "channel" that would allow the two networks to coexist?