Linksys Wireless Router :: Extend E4200 V2 Wifi Network With Airport Extreme

Jan 25, 2012

I have a E4200v2 i also have a Airport Extreme I want to use this to extend my wireless range in my house? I've played around a little tring to configure the Airport extreme but can't seem to get it to connect to my E4200v2? Can you mod the Airprt Extreme with dd-wrt or something that might unlock some of the features?I can't stand the interface. The E4200v2 is brand new.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Extending E4200 Network With Apple Airport Extreme?

Sep 22, 2011

I've recently purchased an E4200, and while it works great, I'd like to use my Apple Airport Extreme (2nd generation) to extend my network to another part of the house that doesn't get as great of a signal.  I've become very frustrated trying to accomplish it, and I'm not sure if the problem is more from the Linksys end, the Airport end, or if it's just me.  

View 3 Replies View Related

Linksys Wireless Router :: Configure Apple Airport Express To Extend Wrt120N Network

Aug 6, 2011

Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how? 

View 2 Replies View Related

Linksys Wireless Router :: WRT310n As Wired Switch Connected To Airport Extreme

Aug 19, 2011

I have an airport extreme router connected in my basement. My family room Ethernet connection is connected directly to the airport extreme. I can access the internet by Ethernet in the family room just fine.What I want to do is use a WRT31N as a switch in my family room so I can connect Mulitple Ethernet devices to the network. I'm having a hard time doing this. How to set up the linksys router? The airport extreme ip address is 10.0.1.1. I tried setting the linksys to 10.0.1.2 and turning off dhcp, but didn't work.

View 1 Replies View Related

Linksys Wireless Router :: Extend E4200 Wifi Networks With Cisco Ap1250?

Mar 26, 2012

I assume that the E4200 uses VLANs for the the guest network.  Is it possible to trunk the LAN interface and pass that vlan to the switch so that you can pass the vlan to an AP?Would be great to see the Guest wireless on the Cisco 1250 like I do the main SSID.

View 5 Replies View Related

Linksys Wireless Adapters :: WMP54Gv4 Causes System Crash With Airport Extreme

Jan 4, 2010

I had been using my Linksys wireless-G PCI adapter WMP54Gv4 in a PC running XP (SP3) and an Airport Extreme wireless router for the past 4 or 5 years without any issues. Then recently, my wireless signal had become flaky on all client machines (on both PC and various Macs, which reported weak signal and kept dropping and searching for a new PPPoE from my DSL line). AT&T verified our line was fine and even sent a new modem but troubles persisted, so I bought a new Airport Extreme last week. This solved the network reliability issue on the Macs just fine. 
 
However, the PC with the WMP54Gv4 adapter now crashes whenever the new Airport Extreme is turned on. There have been no hardware or software changes on the PC, yet it now reliably produces a BSOD stating "DRIVER_IRQL_NOT_LESS_OR_EQUAL". This crash also happens when booting in safe mode with networking. I can avoid the system crash when booting in safe mode without networking or booting normally without my Airport Extreme turned on, though I do see this error: "Linksys Wireless Network Monitor: Access violation at address 0040756D in module EMP54Gv4.exe"
 
So I cannot run any tests of the PCI card on the machine when the wireless network is on, since the operating system crashes.
 
The evidence thus points to an explanation where my wireless network from the new Airport Extreme is tripping up the operation of the linksys wireless card in a way that XP hates. I know the wireless network is OK, since it works fine on my Macs. I confirmed that my driver (v3.0.3.0) is still listed as current for this PCI card, so it's not a matter of having an out-of-date driver.
 
Here's another observation that may be relevant: When I first started using the new Airport Extreme with WPA2 protection, the PC could run without crashing, but it could not connect to the wireless network. I also had trouble connecting via my Macs. Then I switched the Airport Extreme to use WPA/WPA2 security, which is when the network-based PC crashing ensued (though the Macs can now connect just fine).

View 9 Replies View Related

Home Network :: Airport Extreme And Wpn824 As Switch?

Aug 29, 2011

Currently I have the modem into an apple airport extreme, this provides WiFi to the whole house + has a NAS drive connected to it...I have two x box's on the top floor of the house... One is currently wired to one of the airport extremes LAN ports...Now what I am trying to achieve - the second xbox is an old one so needs to be plugged in by cable too... (and I don't want two cables through the house). I have an old Netgear wpn824v2 router. Now so far I plugged the ethernet cable from airport x into one of the lan ports on the Netgear...Then both xboxs are wired into the netgear... The netgear has basically nothing setup on it - no security etc... ip address is on the same network as DHCP router.Netgear has upnp and dhcp disabled...Now stand alone one xbox at a time, the connection is actually faster than I have ever achieved, the full 50mb - but if i wire up my laptop to the netgear and use the internet at the same time the xbox lags like hell, so obviously not tried both xboxs together yet as it will just cause lag!

*modem* ----- wired to ---------
-----airport extreme(provides WiFi to house)* ----- Wired to --
-----*NAS drive* --- AND---
-----*top floor to the second router - Netgear* ---wired to ---
----*2 Xbox's

View 1 Replies View Related

Connecting Airport Extreme To Linksys WRTU54G-TM?

Aug 16, 2011

how to Cascade two routers on one subnet, but when I disable DHCP on the slave router, I cannot add in any DNS settings.

View 4 Replies View Related

Apple Airport Extreme Router - Hawking HWUN3 Wireless Has Become Super Slow?

Jun 19, 2011

For the past year my wireless has been working great and I have being playing games/doing homework with no hassle. Yestetday my internet connection became very slow. After countless restarts, router/modem resets nothing has changed and I only get like 5kb of download speed. Since my internet connection was lost naturally I unplugged the wireless card and re-plugged it, didn't change anything. After that I restarted my computer, but nothing changed. AFTER THAT I unplugged my router, then reset my router to factory settings, which did not change anything. Since everything was backed up I thought I would reinstall Windows 7 to nuke any hidden problems. After 2 reinstalls of Windows 7, nothing has changed. Next I had Comcast reset my connection with them which did not work. Though it did work with my brothers desktop. After some more time just fiddling around my connection went back to lightning speeds. no.....4 hours later my connection went dead.At all times my computer will see my network but it either will not connect to it or it is really really slow now.

Computer info: Apple Airport Extreme router Hawking HWUN3 Wireless USB ASUS P6T Motherboard

View 2 Replies View Related

Wireless :: Airport Extreme Internet Connection Via USB?

Aug 14, 2011

Airport Extreme Internet Connection via USB port?

View 1 Replies View Related

Belkin Routers :: Dual-Band Wireless Range Extender F9K1106 With AirPort Extreme?

Jan 12, 2013

Does the Dual-Band Wireless Range Extender #F9K1106 work with the Apple AirPort Extreme Base Station?

View 1 Replies View Related

Bridge The Jetpack To The Airport Extreme?

Jun 12, 2012

I have recently relocated and am using a verizon jetpack as my internet connection. How can I bridge the Jetpack to the airport extreme?

View 1 Replies View Related

Cisco E2000 - To Airport Extreme

Jan 18, 2011

I have a rev. 1.0 Cisco E2000 router that is decent but when it comes to things like streaming video it severely lacks (especially when talking about HD quality). I know that the router is not really setup for that and it was more of an impulse buy when my old WRT54G v6 died on me. Anyways, I recently got $150 in gift cards to Apple and was thinking of spending it on the Airport Extreme as my wife has a 13" Macbook Pro and we plan on replacing out aging desktop PC with an iMac 21". Originally the gift cards were meant to go to the purchase of the iMac but car repairs and other things got in the way and so that has been put off indefinitely. However, I would LOVE to get a new router, especially simultaneous dual-band.

Quick edit: Things I am looking for in a router....
- SIMULTANEOUS DUAL BAND
- USB connection
- Relatively cheap cost (less than $150 would be awesome!)
- Reliable
- Good throughput for streaming and gaming

View 1 Replies View Related

How To Connect WD Hard Disc To Pc Via AirPort Extreme

Dec 3, 2012

How can I connect my WD hard disc to access this over my home wifi network. The wifi is Airport Extreme

View 6 Replies View Related

Amped SR10000 Repeater With Apple Extreme / Airport

Apr 30, 2013

I have an Apple Extreme Router on the second floor of my house where the modem is. I am trying to get wifi signal in the living room in the first floor area on the other side of house. I have an Apple AirPort express halfway from the living room extending the Extreme's wifi signal, however this is not enough.I bought an Amped Wireless SR10000 repeater which i placed in the living room and was picking up the wifi from the express fine, however after one day of use, the devices would not connect unless I set a static ip from within the device. I am guessing there is some sort of DHCP conflict in the setup.I tried turning off the DHCP from the Amped Repeater but it still would not lease out IP's (I thought in doing so, the main 2nd fl extreme router would be the one in control).

View 1 Replies View Related

Linksys Wireless Router :: Wrt120n Won't Route Airport Express To Wifi Client

Sep 3, 2011

I have an Airport Express and two wireless routers.  The Airport Express is connected to Router 1 via Ethernet.  Router 2 is connected to Router 1 via Ethernet.  Since I like to know which Wireless Router I'm connected to, Router 1 & 2 use different SSIDs.  Router 1 is the DHCP server (DHCP turned off on Router 2).  All security settings are turned OFF.Router 1 is a Linksys WRT120N with latest firmware and Router 2 is a Belkin Wireless Router.I can connect via wireless to Router 1 and Router 2 via the seperate SSIDs and have Internet connectivity (Router 1 is connected the the Internet) and print to a wireless printer connecter to the Router 1 wireless network.
 
Now here is the strange thing.  I can see the Airport Express only if I connect to the Router 2 wireless network!!!  I cannot see it if I connect to the Router 1 wireless network, yet the Airport Express is connected via Ethernet to ROUTER 1 !So for some reason, the LinkSys WRT120N Wireless Router won't route the Airport Express to a wireless client on it's own wireless network, but it will route it to an Ethernet client which is what any client connected to Router 2 wirelesslessly is seen as.  When connected to router 1 wirelessly I can ping the IP of the Airport but something is preventing it from working with iTunes/iPhone/Airport Utility.  It is bizarre because these are all devices connected to the same LAN.  SInce I can ping it, it tells me that it isn't a routing issue, but there must be some sort of filter between the wireless and ethernet that is preventing the Airport protocol from being transmitted.

View 1 Replies View Related

Bridge An Airport Extreme To A Verizon MiFi 4620L Jetpack?

Jun 16, 2012

I have recently moved to a remote area and am using a verizon Jetpack 4620L as an internet connection.I would like to continue using my Airport Extreme in bridge mode to extend my network and to also use my wireless printer and scanner easily.

View 1 Replies View Related

Cisco Switches :: SLM248G Switch With Apple Airport Extreme

Apr 21, 2013

in our office we have an Internet connection 20Mb upload and 20Mb download from XO our ISP provider.When my users connect using an ethernet cable to there laptops they get a speed of 18.34 download and 18.15 upload ping 7ms according to Speedtest.net.But when they connect using the wifl Access point Apple Airport Extreme  they get the download speed 10.7 Mb and upload 14.5 Mb.Why such a difference in speed to the Internet? Is there a setting on the port on the Cisco SLM248G that I need to set for which the Access point is connected to.

View 3 Replies View Related

Security / Firewalls :: Seagate GoFlex Compatible With Apple Extreme Airport?

Feb 12, 2011

I just bought the Seagate FreeAgent GoFlex Home, 1TB network hard drive for my home network and I cannot put files on the hard drive. The hard drive is connected to my Apple Extreme Airport router, and I can see the hard drive when I go to network on my Windows 7 computer, but when I try to put something in/open it, it gives me "error code 0x80070035 The network path was not found." Im not sure if it is my router

View 1 Replies View Related

Linksys Wireless Router :: E4200 How To Set Up Wifi On Business Network

Mar 17, 2013

The task is to share Internet via Wireless router for visitors without any Proxy/Windows Domain authentication.We have:1) Windows based Domain with Active Directory Users, with no DHCP setup, only Static IPs allowed. Used as a DNS server, the IP-address is 192.168.1.1, Domain name, say, Internet Connection via Proxy server which authenticates users via above-mentioned DNS server, the Proxy server IP-address is 192.168.1.3, ruled by MS TMG (ISA server)3) A Wi-Fi Router Cisco E4200.The local area network is wired and works fine. Domain users are happy.The idea is to make visitors happy with a free Internet connection without wiring them into the LAN.So:1) Respected visitors would not have to set up static IP-adresses on their devices to connect to Internet and2) Respected visitors would not have to enter domain credentials to get access to Internet, but3) Network security should not be jeopardized.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Turn Off Wifi Network

Dec 20, 2011

I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost dont work at all with cable, even if i turn off the wireless network, the speed is about  2-3 mbit in and about 6-7 mbit outAll other computers, tv. printer wireless work very fine.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Disable Dhcp But Keep Guest Wifi Network

Mar 15, 2012

My router a E4200. the thing is i want to disable the dhcp services from the router, because there are allready a dhcp server in my network. but if i disable the dhcp will the Guest wifi functions still work?

View 3 Replies View Related

Linksys Wireless Router :: E4200 Wifi Network - Slow File Transfer Speed

Mar 24, 2012

I have recently purchased a Cisco E4200 to replace my D-LINK DIR-655, which I thought was defective because I was getting slow wirless file transfer speed, regardless of setting, location and client.Using the E4200, when I transfer a file from a PC to another, both connected at 300mb on the 2.4ghz band, the file transfer rate reported by windows 7 and networx is from 2MB/s to 3.5MB/s.  I think those transfer rates are not acceptable.  Is that a good assumption ? I would expect something in the range of 10MB/s (which is what I get with a cheap dlink router, wired)
 
I also had great difficulty finding a channel.  I had to try them all one-by-one as the auto channel selection made my PCs connect at 130mb.The E4200 is setup as follows:

-WPA-Personal
-Channel 5
-802.11n only
 
I have tried 3 different computers with different network adapters and they all underperform (IMO..).There are no other wireless networks in my area.I also took the E4200 to my office which is very crowed.  Every single channel is occupied by several wireless networks.  I get a file transfer speed PC to PC of about 2MB.I basically could have kept my DIR-655 as the speeds are identical.

View 4 Replies View Related

Linksys Wireless Router :: Wrt54gs - Extend Wifi / Configure Devices For Ssid

Feb 16, 2012

I have two WRT54GS routers. I want to extend my WiFi from the router connected to my upstream in the office to a second router in the living room. I want devices configured for the SSID and passphrase of my current WiFi (which is find in the office) to work seamlessly in the living room. I understand I can do this by running a cable and configuring router 2 as a client of router 1 with router 2 exposing the same SSID and passthrase on a different channel.
 
But I really don't want to run a cable.There is a point where a client can see router 1 where an AP would cover the living room.
 
Can I put router 2 at that point, have it connect wirelessly as a client to router 1, and have it expose as an AP using the same SSID and passphrase? Can this be done without wiring the router?

View 1 Replies View Related

Linksys Wireless Router :: Add Airport Express To E3000 Home Network?

Dec 15, 2011

I added an airport express wirelessly to my E3000 network at home.  Other wireless devices (laptop) sometimes have issues seeing it within the network.  If these devices are wired in the network they don't have any issues seeing the airport express.  Is there any special configuration I need to do to my E3000 so that wireless devices can see each other?  I also had the same issue with my ps3 for streaming from wireless laptop to wireless ps3.

View 5 Replies View Related

Linksys Wireless Router :: E2500 - Extend Network SSID?

Jan 25, 2012

I have a simple configuration. E2500 using 2.x ghz N-only configuration. The router in in my office. I want to extend the same network ssid by adding another router in the kitchen, on the other side of the house. I haven't purchased the other router yet

View 1 Replies View Related

Linksys Wireless Router :: WAP610N To Extend Network Instead Of Broadcasting Another

Jun 30, 2011

How do you have the WAP610N and WRT610N using the same SSID? I would prefer to have my WAP610N simply just extend my network instead of broadcasting another.

View 1 Replies View Related

Home Network :: Second Router To Extend Wifi Worked Now Can't Login 2 Router?

Mar 20, 2012

I have a Netcomm router which I've had working as my ADSL and my wireless AP.I connected a DLink router via ethernet so as to extend the range of my WIFI.This has worked, but now I cant log in to my DLink router.It started with IP 10.1.1.1After setting it up to not do automatic dhcp and then plugging it in to my Netcomm (which is on 192.168.1) I can no longer find the DLink, whether connected over ethernet or wireless. How it might have had its IP changed as it join the network?

View 14 Replies View Related

Linksys Wireless Router :: Using WRT310N As Access Point To Extend Network

Sep 5, 2011

I currently have a Linksys WRT310N as my primary router/wireless device. I am not getting coverage in my entire home. I was considering purchasing the Linksys E4200 and using the WRT310N as an access point in another part of my house to extend my wireless network. From all of the research and reading I have been doing, it seems that I must connect the WRT310N to the E4200 if I want to use it as an access point. Is this the only way? I have no way to connect the WRT310N to the soon-to-be E4200 unless I run an Ethernet cable across the floor. My goal is to use the WRT310N as a wireless access point without having it wired to the E4200, if at all possible. If this is not, what other way could I go about doing this type of setup?

View 3 Replies View Related

Linksys Wireless Router :: WRT610N Way To Repeat 5GHz Network To Extend Range

Dec 27, 2010

I have the WRT610N, and I was wondering if there is a way to repeat the 5GHz network to extend the range.I am trying to stream content from a Blu-Ray player, and while the 2.4GHz network reaches, the signal is very weak.  The 5GHz network doesn't reach, but I would prefer to stream content through that network than the 2.4GHz.

View 7 Replies View Related

Linksys Wireless Router :: Booster For Cisco 3800HGV-B To Extend Network Range?

Aug 15, 2012

I would like to know what to buy to extend the range of my wireless network , which will not reach throughout my house.  
 
Also, I would like to know what the button is for on the front of of the router, since it is not a WPS button, according to ATT.  

View 4 Replies View Related

Home Network :: Connecting AirPort Express To Linksys WRT54GL Router?

Jan 17, 2013

I have an AirPort Express set up as my router, and that works fine and is the main network that I use. I also have a Linksys WRT54GL that is wired to a printer.Currently, when I want to print from my computer, I have to manually connect to the Linksys network, which is a pain. I would like to wirelessly connect the Linksys to my main network, so I can print even when connected to my Airport Express.Does that mean that I have to configure the Linksys as an access point? A bridge? Something else? How do I do that?

View 8 Replies View Related

Linksys Wireless Router :: WRT120N / E1200 - Extend Home Network With Both Wired And Wireless Connections

Jan 27, 2013

I am trying to extend my home network into my basement with both wired and wireless connections.  I have a WRT120N upstairs, which is connected to my cable modem.  I have an E1200 in the basement, which I have connected with a LAN port.  DHCP is turned off, and all wired connections are getting an address from the upstairs router, and connecting to the internet successfully.I've configured the wireless with the same SSID on both routers, but the clients that connect to the downstairs wireless are not able to access the internet.  They are getting an IP address from the upstairs router, but can't get past the gateway. 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved