Bridge The Jetpack To The Airport Extreme?
Jun 12, 2012I have recently relocated and am using a verizon jetpack as my internet connection. How can I bridge the Jetpack to the airport extreme?
View 1 RepliesI have recently relocated and am using a verizon jetpack as my internet connection. How can I bridge the Jetpack to the airport extreme?
View 1 RepliesI have recently moved to a remote area and am using a verizon Jetpack 4620L as an internet connection.I would like to continue using my Airport Extreme in bridge mode to extend my network and to also use my wireless printer and scanner easily.
View 1 Replies View RelatedI have a rev. 1.0 Cisco E2000 router that is decent but when it comes to things like streaming video it severely lacks (especially when talking about HD quality). I know that the router is not really setup for that and it was more of an impulse buy when my old WRT54G v6 died on me. Anyways, I recently got $150 in gift cards to Apple and was thinking of spending it on the Airport Extreme as my wife has a 13" Macbook Pro and we plan on replacing out aging desktop PC with an iMac 21". Originally the gift cards were meant to go to the purchase of the iMac but car repairs and other things got in the way and so that has been put off indefinitely. However, I would LOVE to get a new router, especially simultaneous dual-band.
Quick edit: Things I am looking for in a router....
- SIMULTANEOUS DUAL BAND
- USB connection
- Relatively cheap cost (less than $150 would be awesome!)
- Reliable
- Good throughput for streaming and gaming
Airport Extreme Internet Connection via USB port?
View 1 Replies View RelatedHow can I connect my WD hard disc to access this over my home wifi network. The wifi is Airport Extreme
View 6 Replies View Relatedhow to Cascade two routers on one subnet, but when I disable DHCP on the slave router, I cannot add in any DNS settings.
View 4 Replies View RelatedI have an Apple Extreme Router on the second floor of my house where the modem is. I am trying to get wifi signal in the living room in the first floor area on the other side of house. I have an Apple AirPort express halfway from the living room extending the Extreme's wifi signal, however this is not enough.I bought an Amped Wireless SR10000 repeater which i placed in the living room and was picking up the wifi from the express fine, however after one day of use, the devices would not connect unless I set a static ip from within the device. I am guessing there is some sort of DHCP conflict in the setup.I tried turning off the DHCP from the Amped Repeater but it still would not lease out IP's (I thought in doing so, the main 2nd fl extreme router would be the one in control).
View 1 Replies View RelatedCurrently I have the modem into an apple airport extreme, this provides WiFi to the whole house + has a NAS drive connected to it...I have two x box's on the top floor of the house... One is currently wired to one of the airport extremes LAN ports...Now what I am trying to achieve - the second xbox is an old one so needs to be plugged in by cable too... (and I don't want two cables through the house). I have an old Netgear wpn824v2 router. Now so far I plugged the ethernet cable from airport x into one of the lan ports on the Netgear...Then both xboxs are wired into the netgear... The netgear has basically nothing setup on it - no security etc... ip address is on the same network as DHCP router.Netgear has upnp and dhcp disabled...Now stand alone one xbox at a time, the connection is actually faster than I have ever achieved, the full 50mb - but if i wire up my laptop to the netgear and use the internet at the same time the xbox lags like hell, so obviously not tried both xboxs together yet as it will just cause lag!
*modem* ----- wired to ---------
-----airport extreme(provides WiFi to house)* ----- Wired to --
-----*NAS drive* --- AND---
-----*top floor to the second router - Netgear* ---wired to ---
----*2 Xbox's
in our office we have an Internet connection 20Mb upload and 20Mb download from XO our ISP provider.When my users connect using an ethernet cable to there laptops they get a speed of 18.34 download and 18.15 upload ping 7ms according to Speedtest.net.But when they connect using the wifl Access point Apple Airport Extreme they get the download speed 10.7 Mb and upload 14.5 Mb.Why such a difference in speed to the Internet? Is there a setting on the port on the Cisco SLM248G that I need to set for which the Access point is connected to.
View 3 Replies View RelatedI just bought the Seagate FreeAgent GoFlex Home, 1TB network hard drive for my home network and I cannot put files on the hard drive. The hard drive is connected to my Apple Extreme Airport router, and I can see the hard drive when I go to network on my Windows 7 computer, but when I try to put something in/open it, it gives me "error code 0x80070035 The network path was not found." Im not sure if it is my router
View 1 Replies View RelatedI had been using my Linksys wireless-G PCI adapter WMP54Gv4 in a PC running XP (SP3) and an Airport Extreme wireless router for the past 4 or 5 years without any issues. Then recently, my wireless signal had become flaky on all client machines (on both PC and various Macs, which reported weak signal and kept dropping and searching for a new PPPoE from my DSL line). AT&T verified our line was fine and even sent a new modem but troubles persisted, so I bought a new Airport Extreme last week. This solved the network reliability issue on the Macs just fine.
However, the PC with the WMP54Gv4 adapter now crashes whenever the new Airport Extreme is turned on. There have been no hardware or software changes on the PC, yet it now reliably produces a BSOD stating "DRIVER_IRQL_NOT_LESS_OR_EQUAL". This crash also happens when booting in safe mode with networking. I can avoid the system crash when booting in safe mode without networking or booting normally without my Airport Extreme turned on, though I do see this error: "Linksys Wireless Network Monitor: Access violation at address 0040756D in module EMP54Gv4.exe"
So I cannot run any tests of the PCI card on the machine when the wireless network is on, since the operating system crashes.
The evidence thus points to an explanation where my wireless network from the new Airport Extreme is tripping up the operation of the linksys wireless card in a way that XP hates. I know the wireless network is OK, since it works fine on my Macs. I confirmed that my driver (v3.0.3.0) is still listed as current for this PCI card, so it's not a matter of having an out-of-date driver.
Here's another observation that may be relevant: When I first started using the new Airport Extreme with WPA2 protection, the PC could run without crashing, but it could not connect to the wireless network. I also had trouble connecting via my Macs. Then I switched the Airport Extreme to use WPA/WPA2 security, which is when the network-based PC crashing ensued (though the Macs can now connect just fine).
For the past year my wireless has been working great and I have being playing games/doing homework with no hassle. Yestetday my internet connection became very slow. After countless restarts, router/modem resets nothing has changed and I only get like 5kb of download speed. Since my internet connection was lost naturally I unplugged the wireless card and re-plugged it, didn't change anything. After that I restarted my computer, but nothing changed. AFTER THAT I unplugged my router, then reset my router to factory settings, which did not change anything. Since everything was backed up I thought I would reinstall Windows 7 to nuke any hidden problems. After 2 reinstalls of Windows 7, nothing has changed. Next I had Comcast reset my connection with them which did not work. Though it did work with my brothers desktop. After some more time just fiddling around my connection went back to lightning speeds. no.....4 hours later my connection went dead.At all times my computer will see my network but it either will not connect to it or it is really really slow now.
Computer info: Apple Airport Extreme router Hawking HWUN3 Wireless USB ASUS P6T Motherboard
I've recently purchased an E4200, and while it works great, I'd like to use my Apple Airport Extreme (2nd generation) to extend my network to another part of the house that doesn't get as great of a signal. I've become very frustrated trying to accomplish it, and I'm not sure if the problem is more from the Linksys end, the Airport end, or if it's just me.
View 3 Replies View RelatedI have a E4200v2 i also have a Airport Extreme I want to use this to extend my wireless range in my house? I've played around a little tring to configure the Airport extreme but can't seem to get it to connect to my E4200v2? Can you mod the Airprt Extreme with dd-wrt or something that might unlock some of the features?I can't stand the interface. The E4200v2 is brand new.
View 1 Replies View RelatedI have an airport extreme router connected in my basement. My family room Ethernet connection is connected directly to the airport extreme. I can access the internet by Ethernet in the family room just fine.What I want to do is use a WRT31N as a switch in my family room so I can connect Mulitple Ethernet devices to the network. I'm having a hard time doing this. How to set up the linksys router? The airport extreme ip address is 10.0.1.1. I tried setting the linksys to 10.0.1.2 and turning off dhcp, but didn't work.
View 1 Replies View RelatedDoes the Dual-Band Wireless Range Extender #F9K1106 work with the Apple AirPort Extreme Base Station?
View 1 Replies View RelatedHave a Verizon mifi jertpack and direct tv. want to connect direct tv to internet for "on demand" service.
View 1 Replies View RelatedI've got the Verizon Jetpack MiFi and cannot figure out how to create a bridge with a D-Link DAP-1513 to get internet. Eventually this setup will be connected to a DVR but for now I'm trying to use it on my laptop to make sure it's going to work. I don't have networking experience and have been trying to figure this out for almost 2 weeks now.
View 1 Replies View RelatedMy husband and I just got a Verizon MIFI Jetpack. My computer has an internal wireless connection so we had no problem getting it hooked to mine, however, my husband is trying to hook on with a Belkin router. The router appears to be reading that the Verizon service is there but when he goes to connect to the internet it says it won't connect. We've tried resetting the router and restarting his computer. It did not fix the problem.
View 3 Replies View RelatedThe laptop identifies the Verizon-890L-B9CE as a wireless network, but will not connect. I don't know how to upgrade drivers without connecting to the internet.
View 2 Replies View RelatedI need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies View RelatedToday I went to an Extreme Networks training session and they discussed a plugin for the switch that emulates IOS. I'm not sure how in depth it gets and if it stays current with the commands in the latest IOS release, but it did the normal commands such as conf t and sh vlan, etc.
View 5 Replies View RelatedI am having a problem with setting up the 2 different networks. It says I am able to have 2 networks in this 1 router and I was able to set up the 2 networks, but i do not see the second network in my network list. I have a total of 7 devices that are connected to the router and my main thing I wanted to do was have 1 laptop on its own network and be able to use the 5ghz channel.
View 1 Replies View RelatedSome guy from COMPusa gave me the pci version which didnt work.... so erm yeah.ill this pci-e version do the trick on my Extreme-z mobo?
View 1 Replies View Relateddownload speed is getting slower in lan, file and print sharing also take long time.
View 1 Replies View RelatedI have a Dlink Wireless N Xtreme DIR-655 I have run out of port 4 on it to a switch with a cat 5 patch cable that is 25 ft long It is connected to the Internet port on a Dlink 4 port switch. When i run from that on any of the 4 ports back to my computer ( Win7). I get no internet access but if i connect the cable straight from the router there is no problem. I even attempted to use a older dlink router for the switches and no luck there at all. Any reason the internet would not be broadcasting through the switch.
View 3 Replies View RelatedToday I purchased a Motorola SURFboard extreme Cable Modem DOCSIS 3.0 in order to replace my old modem which is out of date and has been very slow as of late. I connected the coaxial cable, Ethernet cable(to Linksys wireless router), and power expecting it to simply work. All four lights came on green (power, downstream, upstream, connectivity). The downstream light turned blue which indicates a bonded connection.The device light was blinking on the modem. I connected to my wireless router, but no internet access. I then tried connecting my laptop to the modem directly via Ethernet cable, still no access. I think that rules out the router being the problem. I also ruled out my laptop being the problem as the same thing is occurring with my other laptop and desktop. I called my ISP (Cox Cable) and had them re-establish connection with my modem, this did nothing. I thought for sure this meant I had purchased a faulty modem; I hooked up my old modem and the results were the same, the modem connected fully with no problem (all four lights were green) but I have no internet access.
View 3 Replies View RelatedWe will be connecting Cisco 4507 with Extreme Switches. We ran into spanning-tree issues last time. Extreme does not understand spanning-tree. So what i am thinking it to prevent bpdu advertisement from 4507 to extreme switches and also prevent incoming bddu from extreme switch to 4507. I am thinking of using
spanning-tree bpdu filter
spanning-tree bpdu guard
spanning-tree root guard
I have an RVS4000 V1 router connected to a Comcast Extreme 100 mbps cable modem.The port setting for the port (number 4) is 1000Mbps Full Duplex, auto Negotiate.why the RVS4000 is throttling the port?
View 3 Replies View RelatedMy computer is not wireless so I have needed a wireless router from Time Warner. Directions tell me to connect to my computer. Will that solve the fact that my computer is not built in wireless?
View 2 Replies View RelatedI just rebuilt my network and I've encountered a problem with my wireless access. Right now I have a Dlink 2540B modem/wired router.To that is connected an 8-port Dlink 2208 Switch and a Linksys WRT110 wireless router. All the desktops connect via ethernet to the switch and everything is working fine. I just added the WRT110 and specified it would be a secondary router on the network but as soon as I got it connected it killed my internet. I assumed this was because of DHCP being enabled, which was true once I logged in and looked. I of course disabled it and now the internet is back up on the wired portion and I can connect to the wireless router as well. But the only problem now is that my wireless devices are not being assigned IP's at all. Specifically, my Mac says "airport has a self assigned ip address and will not be able to connect to the internet"How are IP's assigned to wireless devices that connect to the network via a wireless router with DHCP disabled?
View 1 Replies View RelatedMy Xbox360 is wanting a WEP key for my network so that I can connect wirelessly via external networking adaptor. I've been told by Apple techs that my Airport isn't compatible with Airport Utility software, so they can't find my WEP key.
View 8 Replies View RelatedI just bought a HP Pavilion h9. I enjoyed surfing and gaming for a few days when my wireless decided to disappear (when my brother was using it. He can't remember what he was doing when the problem occured)There seems to be nothing wrong with the router (an AirPort Extreme) since all the 4 of my households laptops can "see" and connect without problems.I've been trying to update my 802.11n WLAN card and other basic stuff, such as restoring to the day before the issue occurred.
View 7 Replies View Related