Default Gateway Not Available - Realtek PCIe GBE - Windows 7 MSI Mobo
Mar 3, 2012
Currently getting constant disconnects with the following hardware/software
Modem CM100
Router - Tried 4 different routers, issue consistent throughout them all. Original is the Asus RT-n56u.
Realtek PCIe GBE Family Controller
MSI 790XT-G45
Windows 7 Ultimate
After installing several drivers and probably 10-20 tweaks, the issue has stopped for about 50 minutes after consistent at least every 10-20 minutes.I actually just placed an order for a Motorola Surfboard 6121 Although I need the upgrade anyway.
View 1 Replies
ADVERTISEMENT
Feb 6, 2011
I have just upgraded my computer and now i have a Gigabyte 870A-UD3 mobo with a Realtek PCIe GBe family Controller and i have now gotten the famous "Standard Gateway not available" or something.
View 3 Replies
View Related
Mar 23, 2012
I am having an intermittent problem with my network connection dropping out for no apparent reason.When it drops, I still see the lights blinking on the NIC card, but cannot pass packets even to the router.Windows does not report the connection or the cable as disconnected when this problem is occurring.The problem will persist until I disconnect and reconnect the CAT-5e wire, or disable and re-enable the NIC.As soon as I do one of those 2 things, connectivity immediately returns (and works for another hour or so).I am running a legitimate copy of Windows 7 Home Premium 64-bit on an HP Pavilion.All of the latest Windows updates and the latest firmware drivers are installed.My ethernet connection is a wired Local Area Connection with a static IP address, gateway and DNS.The IP address, gateway and DNS settings are accurate and work for several other computers here.[CODE]
View 1 Replies
View Related
Mar 23, 2012
I am having an intermittent problem with my network connection dropping out for no apparent reason.When it drops, I still see the lights blinking on the NIC card, but cannot pass packets even to the router.Windows does not report the connection or the cable as disconnected when this problem is occurring.The problem will persist until I disconnect and reconnect the CAT-5e wire, or disable and re-enable the NIC.As soon as I do one of those 2 things, connectivity immediately returns (and works for another hour or so).I am running a legitimate copy of Windows 7 Home Premium 64-bit on an HP Pavilion.All of the latest Windows updates and the latest firmware drivers are installed.My ethernet connection is a wired Local Area Connection with a static IP address, gateway and DNS.The IP address, gateway and DNS settings are accurate and work for several other computers here.The Network Interface Card is a Realtek PCIe FE Family Controller (VEN_10EC / DEV_8136 / REV_05).NIC Power Management, Energy Efficient Ethernet, and Link Down Power Saving are all turned off.On the NIC, ARP/Large Send/IPv4,TCP,UDP Checksum/NS Offload, Flow Control, and are all on.
Receive Buffer Size on the NIC is 64Kb (512 buffers). Receive Side Scaling on. 128 Transmit Buffers.Interrupt Moderation is turned on. Magic Packet features are turned off. Optimal Performance enabled.NIC Speed and Duplex are set to 100mbps Full Duplex wherever possible (automatic was also tried).802.1X authentication (EAP or PEAP) is disabled. Auto connection logic is disabled.Connection routes through two switches into a Belkin router; other devices on same networks unaffected.Much of my data is stored on a Network Attached Storage device, with UNC shares mapped to drive letters.Other Windows, Mac and Linux devices connected to the same NAS device have no problems staying connected.When the issue occurs, I can't ping the gateway, do DNS lookups or pass any packets as far as I can tell.I have tried swapping out the CAT-5e cables for other cables and even ran them through a cable tester.
Network fixes I have attempted from the OS level so far include:
~ Switching the dynamic port range to start at 10,000 and run for approximately 54,000 ports
~ Systematically reviewing every running service to make certain that only the essential ones are on
~ Disabling all NIC stacks except Client for Microsoft Networks, IPv4, File and Printer Sharing and Comodo
~ Attempted connections with Comodo turned completely off and its NIC driver disabled
~ Attempted rolling back the RealTek driver to an earlier one from the same family and device line
Using netsh I have tried the following settings:
~ netsh winsock reset catalog
~ netsh int ipv4 reset reset.log
~ netsh int ipv6 reset reset.log
~ netsh int tcp set global rss=enabled
[code]....
View 2 Replies
View Related
Mar 16, 2012
I can't connect to the internet. I'm currently using a USB internet, but the problem still exists. So it's not working with either cable or USB internet. It just won't connect. I've thought for a long time that there is probably something wrong with my network card, but I've run some tests that I saw on the internet, and it appears as if the network card is fine. I've also thought that there might have been a program or something that I installed that could have caused this problem, but I can't find the problem. When I go to the device manager, I can find one network card called: "Realtek PCIe GBE Family Controller". I've tried to reinstall the card, but it doesn't work. I can't find any software on the internet for this card either.
View 15 Replies
View Related
Dec 18, 2012
My computer freezes during torrent downloading , usually within the hour. I have used various torrent clients and problem remains.I have the latest drivers Realtek 8168 v 7065 . Some suggested to turn Checksumms off from the property menu , but that would increase my CPU load. Some other suggested to turn off Task Offload , but I cant find anything similar in Properties.
System Setup
---------------
Summary
Operating System
Microsoft Windows 7 Professional 64-bit SP1
CPU
Intel Core i7 920 @ 2.67GHz55 �C
Bloomfield 45nm Technology
RAM
3,00 GB Triple-Channel DDR3 @ 535MHz (8-8-8-20)
Motherboard
[code]....
View 1 Replies
View Related
Dec 18, 2011
Ive just downloaded wireshark just to mess around and ive noticed that even when ive got nothing open its still capturing packets. It gives me a choice of interfaces i want to choose to monitor and i would of thought it be "Realtek PCIe Family Controller" as this is normally the default one (im using wireless) but its saying no packets are being captured from this interface its the "Microsoft" Interface thats capturing the packets. Ive attached a screenshot, i know this isnt nothing bad but was just wondering 1) why isnt my Realtek PCIe interface capturing anything (even when i have youtube open it doesnt capture anything) and 2) why is Microsoft capturing packets? what is this microsoft interface and why is it capturing packets when nothing is open.
View 2 Replies
View Related
Feb 7, 2012
so i can not connect to net on my desktop but my wifi works fine, the error is the realtek PCIe FE family controller (code 31) i have tried updating the drivers but nothing i have verizion fios.
View 2 Replies
View Related
Jun 1, 2012
We have a Windows XP machine on our network that is giving us a strange problem. We have it statically configured with an IP and a default gateway address which points to a router on our network. This is the same router that nearly all of our machines point to and none of the other machines have this issue.If we open up CMD and make a ping request from an outside server (public or interal servers on other subnets) we get a 'destination host unreachable' error. We can ping the ip address of the router that is assigned as the default gateway. We can circumvent this ip address by adding a static route ('route add' from CMD) directing all traffic on the network interface to the ip of the router. Once this is done we can ping and get a response from any server both internal and external. We also tried doing a tracert (without have the static route added) to an external site by IP address. The tracert does not even show a hop for the router so it seems as if the request is never making it past the interface on the XP machine. We simply get an error saying it is unable to find the host. Interesting though it does provide us with a domain name for the ip address. So somehow it is able to reslove DNS. (We have a local DNS server on the same subnet)
View 7 Replies
View Related
May 25, 2012
I am trying to configure wireless network to my computer but it keeps asking for security key which I am not privy to.
View 1 Replies
View Related
Dec 19, 2011
he has the same problem "default gateway is not available" on his Acer laptop with Windows 7, so we were psyched to find this problem posted - and today even (weird?). However, we tried resetting the : netsh winsock reset catalog etc and rebooted but still no internet access.
View 1 Replies
View Related
Mar 21, 2011
I installed Windows 7 a few weeks back with no hitches but over the last week I have been getting regularly kicked off line with above message that the default gateway was not available! Fortunately the Windows troubleshooter fixes it every time but intrigued why it keeps happening.I have reset the adaptor and the router but still no luck!
View 1 Replies
View Related
Jan 21, 2011
This is terminating on an ASA c5510 sec+ running 8.3(2) Client devices running XP with the same VPN client get an address from the ASA pool e.g. 10.10.50.1 with no default gateway. Users are able to connect without a problem. Windows 7 (32bit) clients with this same VPN client get this address but get a default gateway 10.10.50.2 and are unable to connect for obvious reasons.
View 7 Replies
View Related
Sep 17, 2011
After we change the firewal from PIX515E to Fortigate311B, one notebook which installed Cisco PN client 5.0.7.440 in WIN7 64bits can not access VPN because the default gateway is not correct. For example the IP get from Ip pool is 172.28.22.10 but the default gateway IP is 172.28.22.1. ?
View 2 Replies
View Related
Jun 23, 2010
I have an XPS 8100 and have been very satisfied for the most part, but have had a persistent problem with the wireless card, the Atheros DW1525 WLAN PCIe Card. The wireless signal swings wildly between 3 bars and 5 bars - and the computer is close to the router. The card only weakly picks up other signals and it is often weak and spotty. I compared with my Dell Inspiron 13 (which has an Intel wireless N card), and it is literally 5x as fast on speed tests, picks up a lot of other signals, and is always 5 bars.
I tried to reinstall the Atheros drivers from the Dell support site, and that seemed to do the trick for a while.... the card was picking up as many signals as my notebook and at the same strength and speed. But after a Windows Update, the problem returned. I tried to reinstall the drivers again but got blue screen errors when I attempted to install Atheros' drivers... I spoke to a Dell tech, did a full factory image restore, and while I'm not getting blue screens now, the signal continues to be weak and spotty. I have Windows 7 64 bit..
View 18 Replies
View Related
Jun 24, 2012
When I install a micro-wifi-usb 802.11n with "Realtek RTL8188CU" on a old notebook with Windows XP I get maximum 1.5 to 2Mbits/s. Though installed on a newer notebook with Windows 7 I get 30Mbits/s.Other wifi-usb, Cisco Linksys WUSB100v2 does work on that Windows XP machine at 30Mbit/s, but the dongle is much larger The router Cisco WRT320N is just 5meters away and I always have excellent signal strength.I tried some other drivers without any luck. On the site of Realtek I don't find any driver except with some letter diverence at the end of RTL8188CU, which I also tried.
View 2 Replies
View Related
Mar 10, 2012
About two weeks ago, I took out the old motherboard of my HP computer and put in a new ASUS M4A88T-M. The board is amazing, especially for the money, except that I can't connect to the internet.So, for the last two weeks I've power-cycled about a billion times, ipconfig /this/that/and the next thing over and over, I've winsocked, I've turned programs on and off and on again, checked that the LAN is enabled in BIOS, firewall is off, and probably a bunch other things from the 100's of google pages I've searched.I spent 45 minutes on the phone with my ISP, and the guy was 99% sure there is something wrong with the NIC. Windows says that the device is working correctly, and I think that it is. There must be some setting, some driver, something that will reconnect me to the internet.
View 2 Replies
View Related
Dec 21, 2012
trying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies
View Related
Feb 21, 2013
i joined because i keep on having the same problem. i read around the forum a bit before joining and i saw that mcafee was causing the problem for a lot of people. i dont have mcafee so that cant be it several crashes per day. like, literally close to 100 of them.
View 3 Replies
View Related
May 3, 2012
Periodically, I drop internet everywhere around my college's campus. I'm literally four feet from a router, but it doesn't seem to matter. I'll disconnect, run troubleshooter, and I'll get the error message saying that the default gateway is not available. My college is designed for Macs, but I'm running Windows 7. My Mac colleagues do not experience problems. The computer works at home and at nearly every other wireless network I've brought it in range of. Specifically, either IBM or Dell.
Dell XPS 15
i7-2720QM
8gb Ram
Windows 7 Home Premium SP 1
540? Something around 500 Nvidia graphics card
Ipconfig results:
Windows IP Configuration
Host Name . . . . . . . . . . . . : George-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code].....
View 14 Replies
View Related
Nov 30, 2011
I recently got a new laptop and ever since, the internet goes in and out. Most of the time it is not out long enough to display the no connectivity icon or stop music from streaming but it is noticeable. When I run the troubleshooter it says that the default gateway is unavailable. I tried manually setting the connection information but the same thing keeps happening except the troubleshooter then says that DHCP is not enabled. I've disabled every firewall I can find and updated all the drivers available. Here is my info:[CODE]
View 3 Replies
View Related
Jan 3, 2011
When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.
View 12 Replies
View Related
Feb 8, 2013
I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?
View 3 Replies
View Related
Jan 2, 2011
I have Squid proxy installed on a ubuntu box here. Currently all my PC's use my ADSL modem as their default gateway but what i wanted to do was see if it was possible to use the ubuntu box as the default gateway, and have it route through Squid to my ADSL modem.
View 3 Replies
View Related
May 20, 2011
I am trying to change the password on my D-Link router. So i typed ipconfig into cmd and the default gateway i get is 169.234.95.I have tried what used to work at home such as 192.168.0.1 and all of those.
View 9 Replies
View Related
Sep 10, 2012
I have a VM server, whose IP is in customer VLAN600 ( 172.60.60.10/24 ) and Peer end is switch then Firewall.Switch is configured with same VLAN600 and learning mac-address of Server on VLAN 600, Firewall is also having VLAN600 and IP is 172.60.60.1/24.Server is not able to Ping/reach Firewall and vice versa.
View 1 Replies
View Related
Dec 18, 2012
cannot connect to my default gateway 192.168.1.1 frustrating.
View 1 Replies
View Related
May 8, 2011
Basically, I'm using a broadband modem, which appears to be connecting fine, with all the required lights being on. My ISP says that, from their end, everything is perfect. Even my laptop shows Local Area Network as connected.However, for some reason, I am not able to access the internet. I was able to use it till last evening, but suddenly the internet stopped working. On Google Chrome, it says that there is no DNS or something.Subsequently, when I tried to access my modem settings, it shows as 'webpage not available'. I then noticed that there is no default gateway! I was able to access it the day before, but now I can't.
View 10 Replies
View Related
Feb 7, 2012
i recently had to do a 30/30/30 reset to my Linksys WRT150N which has DD-WRT installed on it... I can't access the configuration settings on the router by typing in 192.168.1.1. I did IPCONFIG/ALL and couldn't nothing came up for Default Gateway.
View 4 Replies
View Related
Sep 17, 2012
It only happens with 1of my laptops, all others have not problems. In the network and sharing ctr, it intermittently says Access type: internet then suddenly I get a no internet access. I've tried release renew DNS, reboot computer, release/renew IP. When it says I have internet access, I attempt to connect to no avail.
View 7 Replies
View Related
Mar 28, 2012
I am trying to get rid of 2 old 2651xm's and 2 2950's from my CCNA days and want to get into the ASA realm. Can I be able to use the ASA, not only as a security appliance / firewall, but also be able to write the access lists, etc, to be able to use this as my router to push packets to and from my internal LAN to the outside world? I guess I should have stated as this being the front end device to my network, just after my DSL Cable modem, that is..and being the only device. I am trying to have this as my main router /firewall solution and then I have an old Linksys router I will pipe off one of the L2 ports to have an AP for my wireless devices? Is this a real solution an ASA can provide?
View 2 Replies
View Related
Oct 11, 2011
I rdp into our server 2008 via IP. This is a router on ip 0.1, this is forwarded to my server on IP 0.3. This server was setup with DHCP default gateway of 0.1. We added a new outside connection on IP 0.2. I was talked through the changes so that internal DHCP requests went to gateway IP 0.2 but RDP still used 0.1. I plan on getting rid of 0.1.Where is the setting to change the RDP to use default gateway of 0.2?
View 3 Replies
View Related
Feb 23, 2012
My ISP is changing out all the ADSL routers in our area and they have blocked the Default Gateway Address, so we can not access it via Web Browser. This is frustrating because they changed our Wi-Fi password, instead of just keeping what we had like an Einstein. They said they did it because of Hackers
View 2 Replies
View Related
