Will E1000 N Router Work With A Wireless G Adapter
Jul 3, 2011
I have a E1000 N router and I was wondering if I can connect a G wireless adapter to it. I am trying to connect it with my Sanyo LED HDTV, it has the port for a USB but I can't seem to get it to connect. I've tried manually setting it up but I seem to have done it wrong. The reason for trying to connect to the television is Netflix. I learned that you can watch it instantly on your Tv, using the Blue-ray or a basic internet connection. The Blue-ray I currently have is not an acceptable brand, so I am trying the basic internet connection.
View 1 Replies
ADVERTISEMENT
Dec 30, 2011
A lady gave me E1000 along with an IMB Thinkpad because her husband was the main user on the internet. I have an intel iMac 10.4.11, DSL. I have not yet connected to either device via the router. I am new to wireless routers. I have been to the configuration page
View 2 Replies
View Related
Apr 11, 2012
I can not get my password to work. The threads that I have read, requires a Ethernet cable to be connected but I have a wireless netgear card on the administrator PC how can I find the password to my E1000 router to verify and to change router settings
View 2 Replies
View Related
Nov 14, 2012
I bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?
View 1 Replies
View Related
Oct 31, 2011
I am about a level 4 maybe (10 being highest) when it comes to network configuration.I know what a router is, an IP addreess (external ones from ISP that is) and how to get around a little bit like how to access wireless config , edit properties on network connections and run ipconfig..My setup....I have a cable modem with 18mbs line...hooked into a Linksys E1000 wireless (N) router.From that I have 3 laptops setup (and a desktop thats never used).(none of whats next may be important but added it just in case)
Laptop a. is hardlined into wireless router (so I can edit config) and will be main machine it runs Vista
Laptop b. is connected to wirless connection from router and will main #2
Laptop c. is connected to wireless router
Desktop is connected to wireless router
(all others above run XP as OS)
My wife is running some webcam software that uses our internal IP address for its connection.It is no problem for her to connect her cam to the site with one laptop (any of the above) but when she tries to go to laptop b. and run another connection it says "You are currently broadcasting From This IP and cannot start another connection".
p.s. We have also tested bandwidth connection over and over on many sites (via browser) and it seems that when a cam is setup and the bandwidth is displayed what comes from / to the cam is WAYY slower than what we get in our tests...
View 1 Replies
View Related
Feb 12, 2012
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password.
If I don't change it - I can not use Cisco Connect app.
If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
View 5 Replies
View Related
Nov 14, 2011
I am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.
View 5 Replies
View Related
Sep 28, 2012
One day I got a blue screen saying there was a hardware or driver failure with the network adapter on the motherboard. I couldn't resolve the problem so I went out and got a new network adaptor. Pluged it in, windows found drivers for it. But I was getting a Unidentified network problem.I have a Linksys E1000 router, internet works on my laptop and xbox360 fine wired and wireless. So I changed ports on the router, changed cables, even changed routers. Still the PC wasn't seeing the router. So I download the latest drivers for the Realtek network adapter, install them, still nothing. So I thought maybe the router is to blame, downloaded the latest firmware and flashed it onto the router, reset it. Still the same. At this point I was sure the new network card was faulty. So I took the computer to the shop where i bought the card. He disabled the old network adapter in the bios. And he had the Internet up and running in the shop. I was happy and took it home... Still the same problem! Rang ISP done a lot of disabling, enabling, static IP no fix... except he told me to bypass the router and try plugging the PC directly to the modem, and that connects fine. I can get internet from the modem, but not through the router, yet everything else works fine though the router. As I said cables and ports in the router have all been changed and checked. When I do the network diagnostics in windows 7 is says, does not have a valid IP configuration.
View 19 Replies
View Related
Feb 6, 2011
I got high speed internet last week and have very little understanding of networking. I think I need either a Wireless Access Point, Bridge or Converter. What I'm trying to do: I currently have a Linksys E1000..I have two computers that access this point via built in adapters in the computers. In another room are my gaming consoles and television that I would like to hook up to the internet as well. Is there a wireless adapter that will pick up my Linksys E1000 signal and let me plug ethernet cords into it so my consoles and television can access the network?
View 2 Replies
View Related
Apr 25, 2011
I have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies
View Related
Aug 27, 2011
Having problem getting another computer online with because it askes me for a password to tmy E1000 CIsco Router but ddidn't get password when i first set it up.. Router number, series, IP address doesn't work either. any thoughts on possible passwords or how i contact Cisco for assistance.
View 1 Replies
View Related
Dec 26, 2011
reset my Linksys E1000 and now I can't access wifi from my phone as neither my pw or my default ps work.
View 2 Replies
View Related
Jun 16, 2011
I purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies
View Related
Sep 22, 2012
I can't get a wireless adapter to work on my newly purchased desktop. Tried 2 different brands, same result: After installing drivers, resetting wireless router etc. the wireless connection sometimes shows up but can't be connected to. I used:
1) TP link wireless adapter
2) Netgear N600 wireless dual band usb adapter.
The netgear one I'm using right now just says, "scanning" constantly. Here's diagnostics:
Host Name: MININT-SNNBPV2
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
[Code]....
View 1 Replies
View Related
May 15, 2012
I own a dell demension 8300 OS Windows xp Professional. What would be a compatiable wireless adapter for my desktop pc?
View 1 Replies
View Related
Jan 8, 2013
I have cable to connect to internet, and recently bought a Bluestork Wireless n usb adapter of 150 mbps, however when trying to connect to this wifi that appears onmy tablet it asks for a password, but I don't know what the WEP or WPA is.
View 1 Replies
View Related
Aug 30, 2011
Some guy from COMPusa gave me the pci version which didnt work.... so erm yeah.ill this pci-e version do the trick on my Extreme-z mobo?
View 1 Replies
View Related
Jan 7, 2011
Seems like there those saying they have gotten there DIR-655 and XBOX 360 Wireless N Adpater to work in 802.11n mode. The adapter will only connect in 802.11g mode (and yes I have the correct adapter). I have set the settings to following
802.11 Mode: Mixed 802.11n and 802.11g
Wireless Channel 2.462 ghz - Ch 11
Transmission Rate Best
Channel Width 20/40
WPA-Personal
WPA2 Only
Cipher Type: AES
Does this router really work with XBOX 360 Wirelss N Adapater. If so, how has others got this to work.
View 3 Replies
View Related
Nov 3, 2012
I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies
View Related
Dec 1, 2012
I'm working on an M5030 that has a red X on the wireless and will not find any networks.
- The ethernet connection WORKS
- The fn+f2 wireless switch combo seems to do nothing
- I've updated the bios
- I've uninstalled and installed the latest driver
- I've installed external USB wireless adapter but it has same issue
- I've scanned for malware, all clean.
When I go to network adapters it has signal bars on the wireless adapter but when I right click -> connect disconnect -> nothing shows as available. If I diagnose, it just says there may be a problem with the wireless adapter. I've tried DISABLING ZoneAlarm firewall to no avail also.
View 7 Replies
View Related
Nov 8, 2012
I have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies
View Related
Aug 9, 2010
I'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies
View Related
Jan 17, 2012
So I can't seem to get anything to work lately... Sad that I can't even get a wireless adapter running now...
So this is a new Wireless-G Notebook Adapter(WPGC54G v1.2) I just got in the mail today. I went to the linksys/cisco website and they only have version 1, 2, 3, etc. Mine says 1.2 so I tried version 1. After installing and following all steps it said the software that connects was inactive.
After searching the internet a bit I found a thread stating v1.2 is version 2. So, I downloaded version 2 and ran that. Now the software isn't inactive but it doesn't "connect" in the linksys software, show any wireless devices, or do anything. I went into device manager and found the wireless card, updated drivers manually, and selected the folder I downloaded from linksys website to search for update drivers. It all ran fine and said drivers were installed. Still won't work. LINK light is not on card, POWER is.
Using a Toshiba Tecra 9000. So my last attempt... I uninstalled everything and stuck the card in and let windows recognize it. Selected manual install, went to the folder I downloaded for ver. 2 to search for drivers. Said everything installed and did drivers successfully but windows says "wireless network unavailable."
View 19 Replies
View Related
Sep 7, 2012
I have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"
But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).
View 12 Replies
View Related
Jul 10, 2011
I have had this computer for about 3 years and it crashed during a storm but when I reset the bios and reinstalled windows it worked again but now I can't get the LAN adapter to light even while cord is in there and I can't get my router to say it's connected to my pc and it says the cat5 cable isn't hooked to my computer but I know the cable works. I'm running windows vista home premium. I try to type in ipconfig/all and it says media disconnected
View 17 Replies
View Related
Jun 10, 2011
im using a laptop with built in wireless adapter and it connects to my router but the connection appears to be very weak because i often get disconnects and the taskbar shows me having only one or two bars(im using windows 7). My roommate's laptop connects to it with max bars. So, i got my old usb adapter, which works fine on my desktop(i tested it), and it cant make the laptop use the adapter instead of the built in wireless adapter. I have tried disabling the built in adapter and it just tells me that i cannot connect to the internet. The usb adapter is enabled but it has a red X on the side of the picture.
View 6 Replies
View Related
Sep 29, 2011
i recently bought a wifi adapter capable of 300mbps, as apposed to my old 54mbps adapter, and an active 10m extension.
now the extension does power the adapter, but the cpu doesnt seem to recognize the adapter is plugged in, but if i plug the adapter straight into the computer then it all works fine.
other people seem to have no problem at all doing this to achieve better signal.
[URL]
View 6 Replies
View Related
Dec 5, 2012
I have this USB Wifi adapter: NETGEAR WNA3100 [URL] I just bought it and thought it would work, but apparently it is def a Windows 7 problem because I have tried it with these others USB adapters only. My main objective is to create a hotspot for the house wirefree and no triping etc etc
Airlink+ 802.11g 2.0 (old) Works with XP but not on W7 (blinks)
WifiMAX Dongle 802.11g 2.0 (also old) (Sometimes blinks at intervals)
TrendNET TEW-644UB (bought last year) (Light stays on/no longer blinks)
Netgear WNA3100 (arrived just a few hours ago) (I made it blink now with its software)
I have tried(netgear):
-rebooting
-installing/uninstalling drivers
-uninstalling itunes
-Using a W8 procedure for it
-tried using different software
-Some other stuff
I have not tried a HKEY codes for it My biggest problem is that the "Disabled" status is stuck and I cannot re-enable it. If there is a way to override this I would be happy to hear it. Using: Windows7 Ultimate Gigabyte Motherboard/AMD chipset For the only one that is enabled(Airlink) it has some funny stuff on the status like 412 Gbps and doesn't have ipv4/6 connectivity [URL]
View 7 Replies
View Related
Apr 15, 2011
I have a P5QL-E and i cant get this network adapter to work. I enabled it in BIOS, but nothing happens in win7, driver says i dont have any device isntalled.
View 3 Replies
View Related
Feb 13, 2012
i have a hp cpu and i want to use my Clear wfif to connect to the internet. I was told that I need an adapter for a CPU to use the Clear signal. I was told that the wifi is really for laptops with built in adapters that cpu's don't have. best adapter to use for my application.
View 1 Replies
View Related
Feb 24, 2012
U have this AWUS036H adapter. and I bought this antenna but it doesn't work with my adapter, not antenna, not even base of antenna.
View 6 Replies
View Related
Mar 10, 2011
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies
View Related
Mar 28, 2011
I have an HP W7 (Home Premium) PC.
I have a wired connection (on-systemboard network interface) to a Belkin 54g router, but the router is not physically connected to the internet (no ethernet cable out to a cable modem/whatever). The router connects several necessary peripherals - mostly wirelessly to the main PC and another W7 PC.) All this stuff worked prior to a move to a new location.
There is freely accessible Wifi in range (public library - wherein I could concievably carry the whole PC and use their WiFi with their blessing).
I attached a USB Wifi adapter to the PC to avail myself of the free service, but W7 will not allow the Wifi adapter to be seen until I detach the ethernet wire. Then it will allow me to see the available network, and connect.
How does W7 (or the system board) look at network? Are they (onboard NIC and USB) mutually exclusive? Do I need a separate ethernet adapter card or a separate USB adapter card to create a different "channel" that would allow the two networks to coexist?
View 3 Replies
View Related
