Cisco Wireless :: How To Tell Which Clients Are Associated With WAP4410
Dec 21, 2010Can you get a list of associated clients from an WAP4410N? How can you tell who's connected?
View 4 Replies
ADVERTISEMENT
Cisco Wireless :: WAP4410 V01 Keeps Going Offline
Jun 5, 2012We have (6) WAP4410N units with hardware V01. What is the latest firmware version that I can use for this product?
View 1 Replies View RelatedCisco Wireless :: Which Power Adapter Will Work With WAP4410
Aug 9, 2010I'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies View RelatedCisco Wireless :: Make WAP4410 Fall Under Two Ip Address Ranges?
Apr 24, 2011I am wondering if I can make our WAP4410 fall under two ip address ranges. I want to have a network for the office users and one for the guest users. We currently use a Safe@Office500WP Checkpoint router. It allows us to create multiple network ranges. We have the office users wireless under 192.168.0.1 ip range and the Guest Wireless is under the 192.168.200.1 range. Do I need two access points or can this be done with just the one?
View 7 Replies View RelatedCisco Wireless :: WAP4410 Acting As Repeating - Missing Modes
Jan 22, 2012Currently I have an almost pure N environment, with the exception of 1 printer. My primary router is a WRVS400N v2, and the WAP 4410N is acting as a repeater. On the WRVS400N I have the option og g/n Mixed (which is what I use), but this option is not available to me with the WAP4410N.It seems like the WAP4410N is taking an all or nothing approach, as each speed is idividually available, or ALL speeds are available.What I would like to know is if this oversight will be resolved in a fufute firmware release so I can have both devices configured equally?
View 1 Replies View RelatedCisco Wireless :: WAP4410 Doesn't Just Make A Universal Power Injector
Oct 10, 2011Contrary to the information contained in the link above, these two parts do not play well together. I purchased both and plugged them in and no go. It doesn't even light anything on the WAP. It worked fine when it was on its own 12V DC adapter but not plugged into this injector. What I don't understand is why Cisco doesn't just make a Universal power injector that is essentially a 1 port switch and is 802.3af or 802.3at compatible. Its maddening. It looks like I'm going to have to get an SD208P and waste 6 ports just to get one with the correct POE for the WAP4410.
View 2 Replies View RelatedCisco Routers :: WAP4410 Dropping Connections
Aug 10, 2011Model: WAP4410N-A V02
Firmware version: 2.0.3.3
Deployed 3 of these as WAPs. No repeaters. They are spaced at least 50 feet apart over three offices, each in a server or switch room.
Across multiple laptops, and multiple WAPS, the wireless will function fine for a while with good bandwidth..then the connection will simply drop. By simply resetting the connection on the laptop or turning the wireless off then on, the connection typically returns, at least for a period of time before it drops again.
I’ve tried these configured as three separate SSIDs on identical channels, as well as one SSID for all three with different channels (preferred for a seamless wireless), and the behavior does not change either way.Based on some other threads, I tried forcing the LAN port speed to 100 mbps, but the problem persists.
Routers / Switches :: Dlink DIR 615 Router - Wireless Clients Can't See Ethernet Clients
Feb 1, 2011I have 4 desktops cat5 to Dlink DIR 615 router. All work fine. Any wireless clients, laptop or netbooks, see the desktop computers for a while then disconnect somehow. All machines can see the Internet through the router at all times. The desktops disappear from the laptop/netbooks but the wireless machines can be seen from the desktop computers but clicking on them gets 'Access Denied' message after a wait.3 desktops = XP, 1 98SE. All laptop/netbooks = XP
View 2 Replies View RelatedCisco VPN :: ASA 5505 VPN Clients Can't Ping Router Or Other Clients On Network
Jun 18, 2012I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
[code].....
what I need to add to get the vpn client to be able to ping the router and clients?
Cisco VPN :: 5520 / 5510 - Can VPN Clients Communicate With Other Dynamic Clients
Nov 5, 2012We currently have an ASA 5520 communicating with 10 ASA 5510's, all on static outside addresses. I was asked to add 5 additional 5510's on dynamic address. All worked well in testing until it was decided that some of the dynamic clients needed to talk to each other.
My testing shows packets just dying in the 5520.
Netgear WNDR4500 - Clients Not Showing Up In Clients List
Jul 6, 2012I have a Netgear WNDR4500 running the stock firmware, acting as a router for my home. I also have 2 routers that are flashed with DD-WRT (Linksys WRT54G and Asus WL-520GU) running as client bridges. The Netgear is 192.168.1.1 and the other 2 client bridges are 192.168.1.2 and 192.168.10.3. The Netgear router is performing DHCP giving addresses from 192.168.10.100 to 192.168.10.254. I have numerous machines connected to the Netgear, wirelessly and wired, and numerous machines wired to each client bridge. All machines have IP addresses that are 192.168.10.100, 192.168.10.101, 192.168.10.102, etc... Everything is working fine, but I have one question: When I access the Netgear router, it shows the client bridges as clients, machines that are wired and wireless to the Netgear router are listed as clients, but the client list does not show any clients that are connected to the client bridges. I assumed that since the router is performing DHCP that all clients would show up.
View 2 Replies View RelatedCisco VPN :: ASA5510 Can't Ping VPN Clients But Clients Can Ping
Feb 29, 2012I have a strange issue on my ASA 5510 (8.4). I can't ping or connect to the VPN clients but the VPN clients can ping/connect to any inside resources. I have checked all the NAT extemtion entries.
View 3 Replies View RelatedCisco Wireless :: WAP 321 No Clients Can Connect
May 10, 2013I just purchased a WAP 321 and followed the setup wizard. Its powered by a poe switch. The issue I have is no clients can connect to it. I updated the firmware. I reset to factory and tried setting it up manually till no one can connect. I dont understand what im doing wrong here. Unless its a bad unit. I will have about 10 to 15 clients connecting to it. Its the only ap in the building.
View 12 Replies View RelatedCisco Wireless :: 881-W Wi-Fi Clients Not Getting DHCP?
Mar 8, 2009I'm monkeying around with an 881-W. Clients can associate and authenticate to ssid 'test', but they cannot get a DHCP address. Clients plugged into f 0 - 3 get DHCP addresses just fine.
I've looked at a lot of different guides, ran debugs etc. When wifi clients make DHCP requests the server never gets them. So there must be some IRB thing going on.
Cisco Wireless :: WLC 2504 - Some Clients Gets IP As Zero
Aug 29, 2012I've problem with a WLC 2504. Some Clients like phones and Thin Clients get an IP 0.0.0.0.Software Version is 7.0.235.0. Test with a Laptop seams to be OK. Some printers also got an 0.0.0.0.Around 30% are not OK. also had the log: Impersonation of AP with Base Radio MAC 00:yy:yy:yy:yy:yyusing source address of 00:xx:xx:xx:xx:xx has been detected by the AP with MAC Address: 00:yy:yy:yy:yy:yy on its 802.11b/g radio whose slot ID is 0 The problem is, I cannot go to 7.2 version because I have 2 x AP 1231 and 2 x 1242 AP's.1231 AP's are not anymore supported in 7.2 Version.
View 14 Replies View RelatedD-Link DIR-655 :: Only Allows One Or Two Wireless Clients
Oct 29, 2011I have had trouble with my DIR-651 router since i bought it. To put it simply, if there a device connected to the wireless network, no other device can connect. Here are the devices i have:
hp pavilion running fedora 15
hp touchpad (webos)
htc thunderbolt (android)
dell inspiron (? work computer..not here right now) running windows xp
I am running wpa 2 using AES encryption in wireless mixed b/g/n mode (I have tried all other permutations of BGN. On the devices that will let me see error logs, all i get is "authentication invalid" errors.) In a few rare cases, i am able to get a second device connected by disabling the first device, connecting second, and reconnecting first.I am running the newest firmware 1.10NA.
Cisco Wireless :: How To Associate WLAN Clients With 802.1x
Sep 17, 2012we have the following situation:
- 2 x WLC 5508 with about 80 - 120 access points (Aironet 3500) each
- 7 x WLAN's with different security settings
- 2 x ACS 5.3
On one WLAN we have the problem, that the students with their own laptops have to enter their AD username about 4-5 time, until they get a successfull 802.1x authentication. The WLAN has the following configuration:
- Hidden SSID
- Only 802.11b/g
- Interface assigned via AP Groups
- WPA2 / AES with 802.1x or CCKM (here I could only allow 802.1x, the clients do not need fast secure roaming)
- Authentication via ACS 5.3 and PEAP
- for more details see screenshots below
Most of the time I can't see any 802.1x authentication attemps on the ACS View, but when there are entries, they are successfull. So in my opinion I think there has to be a problem on WLC side, but I don't know where to search further. We already deactivated the client load balancing in the WLAN, because at the beginning the customer wanted to activate that - but it was clear that there are a lot of clients which had to authenticate multiple times.I know there were some bugs in the 7.0 train, so I upgraded finaly to 7.0.235.0 to overcome this bug here: CSCty07036.To fix the other bug (CSCtt70290) I just disabled all the session timeouts on the different WLAN's.
Cisco Wireless :: No IPs From 2504WLC DHCP To Wi-Fi Clients
Mar 29, 2012I have new 2504 WLC + 1041LAP. I configured the first DHCP scope on WLC and the first WLAN. Then I set WLC DHCP server in WLAN properties and tried to connect to WLAN with wireless clients.
My wireless clients are able to authenticate on WLAN, but not able to get IPs from DHCP. The only lease that DHCP shows is for 1041LAP.
If I set permanent IPs on my wireless clients, they can connect and ping WLC.
Cisco Wireless :: AP1130AG - Unable To See Other Clients On Same AP
Jun 25, 2012We have 3 AP1130AG installed on our network with 2 VLANs. The APs are set up with two SSID, one for each VLAN. If two devices are connected to the same SSID on the same AP, they are UNABLE to ping/communicate with each other. If two wireless devices are on the same SSID and different APs, they are able to ping/communicate with each other. When the two devices are connected to the same AP/SSID, I can ping both devices from a server that is wired connected. I need to figure out why I can't ping/communicate between two devices that are connected to the same AP and are on the same SSID/VLAN. Below is the current configuration of the wireless AP.
Building configuration...
Current configuration : 2897 bytes
!
version 12.3
no service pad
[Code]......
Cisco Wireless :: 877w Communication Between Wi-Fi Clients
Apr 12, 2012I have a Cisco 877w (configuration shown below) and i am trying to use a Photo Transfer App on my iPhone4s and iPad3 which allows transfer of photos and videos between the devices using WiFi, the only thing is i cannot get my devices to communicate with each other and i suspect that this is to do with the configuration of my router as the app works perfectly using bluetooth but obviously a lot slower. I cannot even ping the devices from my pc which is also on the same WiFi network. How i should tweak my config?
View 2 Replies View RelatedCisco Wireless :: AP541N Drops All Clients?
Jun 20, 2010As I posted about in the other AP541N thread about degraded performance, mine did a strange client disconnect last week. It dropped all authenticated clients, but they all thought they were still connected. A quick disable/enable of the wireless card on the laptop would get the computer back on the AP.
This same thing happened again today.
Device information and configuration:
Device: AP541N
H/W: V01
[Code]......
Cisco Wireless :: AIR-AP1141N-A-K9 VID - V04 Clients Disconnect Often
Dec 6, 2011The environment: 20 X air-ap1141N-A-K9 (these are standalone) in three different buildings with either 1 or 2 units per floor depending on sq. footage. IOS is c1140-k9w7-tar.124-25d.JA1.
Problem Users running various tpyes of wireless cards on windows XP SP3 get disconnected periodically throughout the day whether they roam or not. This disconnect problem started happening after we replaced older 1200 series units running wpa and tkip and replaced with 1141n running wpa2 with aes. Users running windows 7 do not get disconnected. However there are very few W7 users on campus as this point in time.
I set up a single test unit shown below and associated two laptops to see if they would disconnect. Not once did I lose connectivity. NAME: "AP1210", DESCR: "Cisco Aironet 1200 Series Access Point"PID: AIR-AP1252G-A-K9 , VID: V03, SN: FTX1339903J NAME: "Dot11Radio0", DESCR: "802.11N 2.4Ghz Radio"PID: AIR-RM1252G-A-K9 , VID: V01, SN: FOC1337107F IOS: c1250-k9w7-tar.124-10b.JDA3
Cisco Wireless :: Why AP 500 Doesn't Assign IP To Clients
Mar 13, 2012We have cisco ap 500 series, it was lightweight, but we migrate it to standalone, now, the scheme is simple.We have a router 2811 and dhcp created on it, also we have f0/0.30 virtual interface with ip of 10.10.30.1.On switch one interface (trunk) goes to router f0/0 interface, and one interface (access) goes to ap.On AP we have BVI interface with 10.10.30.10, and default route to 10.10.30.1.So when we connecting to our SSID, it connect but doestn receive DHCP, and takes APIPA address, why ap doesnt assign ip to clients.
View 12 Replies View RelatedCisco Wireless :: Clients On 1131AG Cannot Talk To Each Other
Jul 27, 2012I have a dozen clients on an 1131AG and they cannot ping each other. I get a reply but it says destination host unreachable.
View 4 Replies View RelatedCisco Wireless :: 3310MSE That Does Not Track Clients
Oct 17, 2012We got a 3310MSE that does not track clients.,rogues etc for some reason.
- there are no firewalls between PNCS and MSE
- clocks are synced up with NTP
- CAS is running on the MSE
- I have added controllers and a test site with clients and is synced up with the MSE.
- Have enabled tracking under tracking doe clients and rogues excluding adhoc rogue APs -we only have 100 element license.
The only other thing worth mentioning is that MSE is running version 6 firmware and the controllers are 7.0.220 but I do not think this should prevent MSE from tracking devices. [code]
Cisco Wireless :: 5508 - Clients Not Getting IP Address
Nov 23, 2011I have configured 5508 with multiple APs but clients on the internal SSID aren't getting an IP address. I have the IP helper address configured and I have also disabled DHCP proxy on the controller.
I get the following from the client debug, I don't know what the below mac address is, it's not one my APs or the clients, I am not seeing this mac address on the controller at all but it shows up in the debug.
type = Airespace AP - Learn IP address
on AP 6c:9c:ed:87:23:c0
*Dot1x_NW_MsgTask_0: Nov 25 16:14:17.579: 08:11:96:20:94:28 Entering Backend
[Code].....
Cisco Wireless :: AP541N - Dropping Clients
Jan 8, 2012I have 3 AP541Ns setup in a small environment. The wireless clients use laptops to attach, via RDP, to a Microsoft Terminal Server. They need the ability to walk, with laptop, from room to room, IE roaming wireless clients. The issue is the clients drop and re-attach constantly and takes up to 5 minutes to re-attach to the WLAN / RDP session. Is this a symptom of going from WAP to WAP and is their anything I can do about it.
View 2 Replies View RelatedCisco Wireless :: AIR-CAP3502I-A-K9 - How Many Clients Can Associate To AP
Nov 18, 2012I need know how many clients can associate for this AP model
AIR-CAP3502I-A-K9
AIR-LAP1131G-A-K9
I have 45 clients currently associated with each AP.
Cisco Wireless :: AP 1142 - Clients Can't Connect
Dec 10, 2012What's wrong with this config ? Clients can see the wireless ssid's but cant connect.
View 1 Replies View RelatedCisco Wireless :: 877W LAN Viewable By Some Clients But Not Others
Jul 6, 2012I have a Cisco 877W router that has been running flawlessly for nearly 2 years. During that time I've never had to manually reset the router, it has been more reliable than my ISP.However one month ago I left my business for a week and came back to find that the WLAN was no longer visible from my laptop. I searched google, tech forums, and these forums for conclusive explanations as to what is happening but found nothing.The main issue is an inability to see the network, old wireless devices that have been using the WLAN for a while have no trouble viewing the network or connecting to it.How ever, any time a new device is brought in (Samsung Galaxy Tab, new Laptops, and new Desktops) the WLAN is not available.I was able to make the device visible to my laptop by changing the country code on my network device to Region 1, but this is not an option for all devices or configurations.
I have changed the broadcast channels, shutting down the WLAN, configuring WLAN differently (through several different Security methods).My separate access points are usually visible by all clients, (I use D-LINK wifi routers configured to AP mode throughout my facility) however the Cisco just doesn't like to be seen?
Cisco Wireless :: 2500 / 5500 - Wireless Access Point Identification By Clients
Apr 30, 2012We have recently been given this unusual task. The setup is a series of CAP3502P access points, and a wireless controller (either 2500 Series or 5500 Series), as well as other standard network infrastructure.
In this network, the client (mobile/wireless) devices must be able to detect when they change what access point they are communicating through, while also requiring a seamless transition. Ie, if the client device is communicating via access point A, and displaying the application menus for A, when the user walks to the area services by access point B, it must detect that sot he application can display menus for B, without the user having to select "B".
Is there a way for the client device to detect which access point it is using and provide that to an application? Or alternatively a way for a host service residing on a server to get that information from the wireless controller?
Cisco Wireless :: Can Access Point AP541N Connect To Wireless Clients
Aug 10, 2010Can the access point AP541N connect to wireless clients with 802.11g/a simultaneously?
View 1 Replies View RelatedCisco Wireless :: AP-1141N-A-K9 / How To Know If Wireless Clients Are Connected Under N Mode
Nov 13, 2012I would like the know if there is a way to know which wireless clients are connected under N mode. There is any kind of command where can show me that ?. I don´t have a wireless controller. My AP is AP-1141N-A-K9
View 2 Replies View Related