Cisco Wireless :: AIR-AP1041N-E-K9 / AP Not Getting Ip Address Assigned
Apr 21, 2012
I have a problem with my AIR-AP1041N-E-K9, i do not seem to get an ip-address assigned after a reset to factory defaults.I do see the AP with CDP:
Device-ID: ap
Advertisement version: 2
Platform: cisco AIR-AP1041N-E-K9
Capabilities: TransBridge IGMP
Interface: gi5, Port ID (outgoing port): GigabitEthernet0
Holdtime: 163
Version: Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
[code]...
I also noticed that when i connect to the AP via console-cable, i can see the AP boot up in the console session, but then i do not get a login prompt, but it seems like the AP is responding; if i shutdown the interconnecting link between the switch and the AP, i do see log messages appearing in the console-connection.I have tried to debug on the Switch, but i need a password, so i can debug, which i do not have.,
View 2 Replies
ADVERTISEMENT
Aug 23, 2009
I recently switched routers to the DIR-615 and I'm trying to troubleshoot why one of our laptops keeps losing the IP address and gets a self-assigned IP address. I see the following messages in the log, I am wondering if the reason codes are listed and explained somewhere? I tried searching the manual but could not find any information.
View 9 Replies
View Related
Feb 7, 2012
configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies
View Related
Sep 1, 2011
I have 2 servers. 1 is a terminal server windows 2003 sb terminal server.(working fine) and the other is server 2003 small business DC configured with dhcp, dns, SQL, & wins. Last week one of the network programs that is located on the DC started refusing connections.So doing some trouble shooting I noticed that when I ping the server name I get a local address of *.*.*.42 when the address the machine is assigned is *.*.*.5. When I do an Ipconfig /all on the DC it only shows the *.*.*.5 number. I look in DHCP and *.*.*.5 is reserved for the DC Computer. And the *.*.*.42 isn't even in the address leases. I have also looked through the DNS settings and see no alias with the .42 number. And the number does not show up in the reverse lookup zone either.
View 5 Replies
View Related
Feb 6, 2011
I have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.
View 6 Replies
View Related
Apr 12, 2012
Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies
View Related
Jun 12, 2011
I just rebuilt my network and I've encountered a problem with my wireless access. Right now I have a Dlink 2540B modem/wired router.To that is connected an 8-port Dlink 2208 Switch and a Linksys WRT110 wireless router. All the desktops connect via ethernet to the switch and everything is working fine. I just added the WRT110 and specified it would be a secondary router on the network but as soon as I got it connected it killed my internet. I assumed this was because of DHCP being enabled, which was true once I logged in and looked. I of course disabled it and now the internet is back up on the wired portion and I can connect to the wireless router as well. But the only problem now is that my wireless devices are not being assigned IP's at all. Specifically, my Mac says "airport has a self assigned ip address and will not be able to connect to the internet"How are IP's assigned to wireless devices that connect to the network via a wireless router with DHCP disabled?
View 1 Replies
View Related
Mar 21, 2013
We recently implement WLC 5500 Series, I found out guest user once period of that user expired it will not appear at lobbyadmin page where you can see list of users.
Is there any way to see expired guest users and also IP address which assign to guest user?
View 2 Replies
View Related
Nov 13, 2011
I've configured vpn ipsec with wizard but my ip address assigned by pool not reach the lan network ,lan network: 192.168.0.0 /24,pool network: 193.168.0.0 /24
View 12 Replies
View Related
Mar 30, 2011
How can I change my external IP address which is assigned
View 1 Replies
View Related
Jul 8, 2012
I am trying to setup VLANs and most of configurations are working ok now except IP address assignment from DHCP. If any computer in VLAN 120 or 130 configured with manual IP address, then all works fine. It can reach internal servers and the internet without problem.If the IP address is assigned automatically then any computer in VLAN 120 or 130 are obtaining IP address (strangely!) from VLAN 100. Because switch ports that connected to the computer belongs to VLAN 120 or 130, the computer cannot reach internal servers and the internet with ip address from VLAN 100 . All SVI interfaces for VLAN 100, 120 and 130 have ip helper-address option defined pointing to the DHCP server. No DHCP snooping enabled on all switches at this point. DHCP server have three scopes for the three different VLANs.
View 2 Replies
View Related
Oct 8, 2012
We have a Cisco Aironet 1242 AG Series which we are trying to setup. The DHCP assigns the IP address, but we cannot connect to it. We have had this problem with a previous Aironet unit, which this new one we have got now is also having the same problem!Everything seems to be correct, but we cannot get to the IP address to set it up.
View 12 Replies
View Related
Dec 1, 2011
I have a Dell Inspiron 530s desktop running Vista SP2. When I attempt to get online using a cable or a wireless USB adapter I get a self-assigned IP Address. When I manually add an IP and DNS addresses I can't get online also. I have removed my security software (webroot) and have disabled Windows Firewall.The same ethernet connection works on another one of my computers fine.
View 14 Replies
View Related
Jul 18, 2012
I have WLC 4402 working with AIR-AP1131AG-E-K9. Need to buy another pair. I looked to the side air-ap1041n-e-k9. Tell me whether or not the compatibility of the controller and the AP1041n? One more question. When buying in 1131 is still in the box and power cord to the point. The new 1041, the purchase comes with the point of the power cord?
View 13 Replies
View Related
Sep 18, 2011
How do you configure for standalone use. no documentation.
View 1 Replies
View Related
Mar 6, 2012
I'm trying to get confirmation on whether you can have workgroup bridge mode on the 1040 series model.
The 1041N has the same IOS as the 1141/1241 and it has the settings are there, but I read somewhere on the cisco site that workgroup bridge is only supported on 1100 and 1200 series, is this correct or old information?
Scenario is: I have an existing stand alone 1041N AP, on the other side of the building I have a network LAN switch with a couple of PCs, instead of running cables I would like to add an AP as a bridge to link that switch and PCs to the network that the AP is plugged in to. I believe this is called Workgroup Bridge Mode. In fact there already is a cheap non-cisco wireless device doing this but it is unreliable.
I just placed an order for Two 1041N APs, do I need to change the order to Two 1141N instead?
Also even if the 1041N does not support workgroup bridge mode, can it still act as the ROOT Bridge and have 2 1141N APs configured in bridge mode connected to the 1041N?
View 1 Replies
View Related
Sep 11, 2011
some days ago I succesfully converted AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).I used c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.But there are any autonomus to lightweigt firmware for this AP.I tried to use c1140-rcvk9w8-tar. 124- 21a.JA2.tar for 1140 but AP hungs after that. How can i back to LWAPP version in 1041?
View 7 Replies
View Related
Jan 30, 2013
I'm trying to track associations on one of my AiroNets (AP1041N) using the show dot11 associations command, but it does not show anything! e.g.AP1#show dot11 associations allAP1#show dot11 associations all-clientAP1#show dot11 associationsAP1# Is there something I need to enable in the configuration to track associations like this?
View 1 Replies
View Related
Feb 1, 2012
I've setup the following AP1041N configuration, but for the life of me - the radio will not enable.
++
sho conf
Using 3234 out of 32768 bytes
!
[Code]....
View 10 Replies
View Related
May 23, 2013
I need to configure public and private wireless access using an ASA 5505 and an Aironet AIR-AP1041N-A-K9. I need to be able to do this via ASDM and http if at all possible. I simply do not have the time to learn hundreds of lines of arcane CLI code. The Aironet connects to the ASA successfully, and receives an IP. I can then connect to the AP wirelessly, but do not receive an IP. I have setup a second SSIDVLAN on the AP, and can't connect to it at all.
View 4 Replies
View Related
Oct 15, 2012
For some reason, a couple of days from today, my Cisco wrt54g2 drops ip assigned by Motorola modem.It gets it back after a while (10 mins) and works for another 15 minutes.
View 3 Replies
View Related
Jun 24, 2007
Here at HQ we have a 4402 WLC. At our remote sites we have 1231G APs running in autonomous mode. I upgraded one of the APs -- IOS 12.4(3g)JA -- to run LWAPP. Per release notes I've read upgraded 1231's do not support REAP/HREAP mode, consequently, it's running in LOCAL mode.
The AP is managed by the WLC. I created a WLAN for the remote site and assigned it to the MGMT interface; the remote site subnet doesn't exist in HQ. The DHCP server for the remote site is presently at that site; AP and DHCP server reside at the same place.
Clients authenticate successfully to the remote site AP, however, they are not getting DHCP addresses assigned. Does the DHCP server for the remote site have to reside in HQ since the AP is running in local mode? If so, where is that specified, on the MGMT interface config?
View 4 Replies
View Related
Jan 4, 2012
I just bought a Linksys E4200v2 router and updated the firmware to 2.0.26.124551. The DHCP server is turned on however, it won't issue any IP addresses. I have to set IP reservations for all of my devices in order for the router to give them an IP address. This includes my printer, xbox360 and 2 computers. I'm also having this problem with the wired and wireless lan.
View 4 Replies
View Related
Apr 2, 2013
I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies
View Related
Jun 4, 2013
I have just set up my asa5505 and while in the sh run I have the following lines
-dhcpd address 192.168.2.200-192.168.2.231 inside
-dhcpd enable inside
-dhcpd dns 68.94.156.1 interface outside
When a client connects to the device like: 192.168.2.215 there is no dns assigned. My devices are unable to access the internet unless I manually assign the dns in the local settings for that host.
View 6 Replies
View Related
Feb 1, 2011
I�ve assigned the static IP to Server, but when i go back to network properties it show Obtain IP address automatically, however, network working fine with previously assigned IP.
View 2 Replies
View Related
May 29, 2011
I've read a lot of threads on this and tried a lot of the suggested solutions... nothing has fixed my problem yet.I'm running Windows XP SP2. I've recently been installing a VPN and setting up firewall rules. I didn't have any problems (was using Comodo firewall) until I installed Sygate Firewall. I've since un-installed but still can't get Windows to connect to the internet via wired or wireless connections[CODE]
View 3 Replies
View Related
Jul 27, 2011
I'm new to working with the ASA 5505 ,VPN and reverse NAT.
The basic setup is as follows. I'm trying to setup a IPsec site to site tunnel with reverse nat on the remote side.
I have as the tunnel up and it passes traffic. I have setup reverse NAT for 172.x.x.1 to translated IP 216.x.2.101 my ASA also has an IP address of 216.x.2.102.
Any connection from 172.x.x.1 to 216.x.2.1 should appear to be comming from 216.x.2.101
When I ping or telnet from 216.116.86.1 to an open port on 216.x.2.101 I get the banner from 172.x.x.1, seems like it is working.
However in my setup I'm only given a singel IP that of the NAT address 216.x.2.101, so when I remove the IP address assigned to the inside interface 216.x.2.102. all conductivity is lost.
When I set the inside interface to 216.x.2.101 and I setup a static NAT rule for 172.x.x.1 to 216.x.2.101, I get a message that says all traffic will be redirected and I will be unable to connect to the ASA.
Once thats in place, and I make any connection from 216.x.2.1 to 216.x.2.101on any port I get a connection but then it's reset, I no longer get the telent banner I was expecting.
My running config is,
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
View 1 Replies
View Related
Jan 6, 2011
I have a Cisco ASA 5510 with a 5 block of IP addresses assigned from our ISP. I am having issues with connectivity and routing traffic from the outside interface to the outside interface. I have my outside interface set up with IP address of 24.182.x.146, it allows internet access and also hosts a web server. Any time I have a client using this device for internet access, I am unable to have traffic accepted for my web server. I.E 100.100.x.52 is using this device, it browses to https://24.182.x.146 and it gets an unable to connect. I am able to connect to the web server from any other ISP/Device. [code]
View 4 Replies
View Related
Dec 27, 2011
I've been using this setting for clients in small offices and what not, and since all they wanted was to give another nutch of security to their network, we've been intalling cisco routers 2600 series still outhere for their internet connections and we had no issues what so ever, not until we run into cable isp provider, and their dhcp wont be able to assign our interface a dynamic IP, this is the setting aplied to the router interface;
interface fastethernet0/0
ip address dhcp
ip nat outside
no ip redirects
no ip unreachables
no ip proxy-arp
Why it wont be seen or assigned an ip by their dhcp, I talked to their isp and they assigned a static ip (private one) and we still have the same issue, if i connect a pix 506e interface with the ip add dhcp assigned to it gets a dynamic ip right away...
View 8 Replies
View Related
Jun 21, 2012
I have a Cisco 5520 using ASDM 6.4
Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..
View 1 Replies
View Related
Aug 3, 2011
I have a Cisco 1811 router running the 15.1(3)T IOS. I am having some difficulty with the current zone based firewall and the SSL VPN.
When a user connects, they are put into Virtual-Template 1 which has a zone based assignment of "sslvpn". However the traffic report for the users is listed as being blocked by the zone based firewall in the outbound direction(office out to the wan zone).
View 1 Replies
View Related
Jul 17, 2011
I'm trying to determine who's throttling our 'Outside' interface because it's being hogged.Is there an easy way to see what data is assigned to what object on our ASA5510
View 2 Replies
View Related
