LAN Not Showing Static IP Assigned?
Feb 1, 2011I�ve assigned the static IP to Server, but when i go back to network properties it show Obtain IP address automatically, however, network working fine with previously assigned IP.
View 2 Replies
ADVERTISEMENT
Cisco WAN :: 892 / Static Ip Address Assigned To The Interface?
Feb 7, 2012configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies View RelatedLinksys Wireless Router :: Unable To Access Ea4500 After Static IP Assigned
Apr 2, 2013I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies View RelatedRouters / Switches :: Computer Is Not Showing Static Ip?
Jan 17, 2011I got a static ip from my isp. I set up my static ip manually through my linksy router. I need the static ip to connect to a private network for my new job but cant connect to that network. I went to whatsmyip and found that my old dynamic ip is still showing up externally, it looks like my ip4 is using the dynamic as a preferred. My question is do i need to manually change the network connection on my LAN and wireless connection under ipv4 to change it from automatically obtain TO use the following address and put in my static? And do I have to change the DNS also? I am on a home network with one desktop on vista home premium and laptop windows 7.
View 5 Replies View RelatedVista Showing Normal Wireless SSID Plus Showing Second Unidentified Network
Feb 5, 2011my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedLaptop Unable To Get Assigned IP?
May 29, 2011I've read a lot of threads on this and tried a lot of the suggested solutions... nothing has fixed my problem yet.I'm running Windows XP SP2. I've recently been installing a VPN and setting up firewall rules. I didn't have any problems (was using Comodo firewall) until I installed Sygate Firewall. I've since un-installed but still can't get Windows to connect to the internet via wired or wireless connections[CODE]
View 3 Replies View RelatedComputer Name Returning Address Different To Assigned One
Sep 1, 2011I have 2 servers. 1 is a terminal server windows 2003 sb terminal server.(working fine) and the other is server 2003 small business DC configured with dhcp, dns, SQL, & wins. Last week one of the network programs that is located on the DC started refusing connections.So doing some trouble shooting I noticed that when I ping the server name I get a local address of *.*.*.42 when the address the machine is assigned is *.*.*.5. When I do an Ipconfig /all on the DC it only shows the *.*.*.5 number. I look in DHCP and *.*.*.5 is reserved for the DC Computer. And the *.*.*.42 isn't even in the address leases. I have also looked through the DNS settings and see no alias with the .42 number. And the number does not show up in the reverse lookup zone either.
View 5 Replies View RelatedPC Being Assigned Non-existent IP Range Over DHCP
Feb 18, 2011I've got an issue with one of the businesses I work with. Just yesterday a PC had this problem, and this morning one more followed suit. These PC's were given a 192.168.35.x IP address when configured to take whatever the router gives them, however our Sonicwall TZ190 is configured to hand out a 192.168.20.x IP address over DHCP. There were no secondary IP configurations on the client workstation, no virii, nothing out of the ordinary. When I set a static IP on the client it works fine, but when I put it back to automatic it will once again give itself a 192.168.35.x IP (and subsequently have a gateway of .35.1, somehow). I've checked the router, there's nothing on the LAN side of the network interfaces besides 192.168.20.x.
View 2 Replies View RelatedD-Link DIR-655 :: How To Make Sure PC Only Use 1 Assigned IP Address
Feb 6, 2011I have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.
View 6 Replies View RelatedCisco Firewall :: ASA 5505 - No DNS Assigned
Jun 4, 2013I have just set up my asa5505 and while in the sh run I have the following lines
-dhcpd address 192.168.2.200-192.168.2.231 inside
-dhcpd enable inside
-dhcpd dns 68.94.156.1 interface outside
When a client connects to the device like: 192.168.2.215 there is no dns assigned. My devices are unable to access the internet unless I manually assign the dns in the local settings for that host.
Cisco Routers :: RV180W With 1.0.2.6 Firmware - Static DHCP Have No Buttons To Add New Static Lease
Mar 12, 2013Today I installed the 1.0.2.6 Firmware on a RV180W. I only have now two problems regarding the Static DHCP support in the GUI.
1. Via the Networking > LAN (Local Network) > Static DHCP I have no buttons to Add a new static Lease.
2. Via the Networking > LAN (Local Network) > DHCP Lease Clients I can thick a Lease and click on Make Static IP. The result is an error: Operation failed.
No Longer A Connection Specific DNS Suffix Assigned
Apr 11, 2011I was trying to learn a bit more about routers and therefore tried to acces one of our routers using an external ADSL line at work.The router is a ZYxel Prestige 324. Since I did not have the password I performed a hard reset.Now when I try to acces any website I receive error 105 ERR_ NAME_ NOT_RESOLVEDThe only difference that I can see now is that there is no longer a connection specific DNS suffix assigned.Could this be the issue? If yes how can I configure this?
View 3 Replies View RelatedManually Assigned Ip Configurations Using Packet Tracer?
Oct 12, 2012using packet tracer, how can i find dns server ip address and i am having trouble pinging the desktops and server that i manually assigned the ip addresses to
View 2 Replies View RelatedProtocols / Routing :: Any Way To Get IP Assigned To Physical Address?
Apr 12, 2012Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies View RelatedAirport Has Self Assigned Ip Address And Will Not Be Able To Connect To Internet
Jun 12, 2011I just rebuilt my network and I've encountered a problem with my wireless access. Right now I have a Dlink 2540B modem/wired router.To that is connected an 8-port Dlink 2208 Switch and a Linksys WRT110 wireless router. All the desktops connect via ethernet to the switch and everything is working fine. I just added the WRT110 and specified it would be a secondary router on the network but as soon as I got it connected it killed my internet. I assumed this was because of DHCP being enabled, which was true once I logged in and looked. I of course disabled it and now the internet is back up on the wired portion and I can connect to the wireless router as well. But the only problem now is that my wireless devices are not being assigned IP's at all. Specifically, my Mac says "airport has a self assigned ip address and will not be able to connect to the internet"How are IP's assigned to wireless devices that connect to the network via a wireless router with DHCP disabled?
View 1 Replies View RelatedCisco VPN :: ASA 5505 - Reverse NAT With Only One IP Assigned To Interface
Jul 27, 2011I'm new to working with the ASA 5505 ,VPN and reverse NAT.
The basic setup is as follows. I'm trying to setup a IPsec site to site tunnel with reverse nat on the remote side.
I have as the tunnel up and it passes traffic. I have setup reverse NAT for 172.x.x.1 to translated IP 216.x.2.101 my ASA also has an IP address of 216.x.2.102.
Any connection from 172.x.x.1 to 216.x.2.1 should appear to be comming from 216.x.2.101
When I ping or telnet from 216.116.86.1 to an open port on 216.x.2.101 I get the banner from 172.x.x.1, seems like it is working.
However in my setup I'm only given a singel IP that of the NAT address 216.x.2.101, so when I remove the IP address assigned to the inside interface 216.x.2.102. all conductivity is lost.
When I set the inside interface to 216.x.2.101 and I setup a static NAT rule for 172.x.x.1 to 216.x.2.101, I get a message that says all traffic will be redirected and I will be unable to connect to the ASA.
Once thats in place, and I make any connection from 216.x.2.1 to 216.x.2.101on any port I get a connection but then it's reset, I no longer get the telent banner I was expecting.
My running config is,
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
Cisco WAN :: 5510 Block Of IP Addresses Assigned From ISP
Jan 6, 2011I have a Cisco ASA 5510 with a 5 block of IP addresses assigned from our ISP. I am having issues with connectivity and routing traffic from the outside interface to the outside interface. I have my outside interface set up with IP address of 24.182.x.146, it allows internet access and also hosts a web server. Any time I have a client using this device for internet access, I am unable to have traffic accepted for my web server. I.E 100.100.x.52 is using this device, it browses to https://24.182.x.146 and it gets an unable to connect. I am able to connect to the web server from any other ISP/Device. [code]
View 4 Replies View RelatedCisco WAN :: 2600 - IP Won't Get Assigned To Interface By ISP DHCP
Dec 27, 2011I've been using this setting for clients in small offices and what not, and since all they wanted was to give another nutch of security to their network, we've been intalling cisco routers 2600 series still outhere for their internet connections and we had no issues what so ever, not until we run into cable isp provider, and their dhcp wont be able to assign our interface a dynamic IP, this is the setting aplied to the router interface;
interface fastethernet0/0
ip address dhcp
ip nat outside
no ip redirects
no ip unreachables
no ip proxy-arp
Why it wont be seen or assigned an ip by their dhcp, I talked to their isp and they assigned a static ip (private one) and we still have the same issue, if i connect a pix 506e interface with the ip add dhcp assigned to it gets a dynamic ip right away...
Cisco Wireless :: AIR-AP1041N-E-K9 / AP Not Getting Ip Address Assigned
Apr 21, 2012I have a problem with my AIR-AP1041N-E-K9, i do not seem to get an ip-address assigned after a reset to factory defaults.I do see the AP with CDP:
Device-ID: ap
Advertisement version: 2
Platform: cisco AIR-AP1041N-E-K9
Capabilities: TransBridge IGMP
Interface: gi5, Port ID (outgoing port): GigabitEthernet0
Holdtime: 163
Version: Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
[code]...
I also noticed that when i connect to the AP via console-cable, i can see the AP boot up in the console session, but then i do not get a login prompt, but it seems like the AP is responding; if i shutdown the interconnecting link between the switch and the AP, i do see log messages appearing in the console-connection.I have tried to debug on the Switch, but i need a password, so i can debug, which i do not have.,
Cisco VPN :: 5520 - How To Add Self Assigned Certificate For Access
Jun 21, 2012I have a Cisco 5520 using ASDM 6.4
Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..
Cisco VPN :: 1811 - WebVPN Being Assigned WAN Zone
Aug 3, 2011I have a Cisco 1811 router running the 15.1(3)T IOS. I am having some difficulty with the current zone based firewall and the SSL VPN.
When a user connects, they are put into Virtual-Template 1 which has a zone based assignment of "sslvpn". However the traffic report for the users is listed as being blocked by the zone based firewall in the outbound direction(office out to the wan zone).
Cisco :: What Data Is Assigned To What Object On ASA5510
Jul 17, 2011I'm trying to determine who's throttling our 'Outside' interface because it's being hogged.Is there an easy way to see what data is assigned to what object on our ASA5510
View 2 Replies View RelatedLinksys Cable / DSL :: WAG160N Static DNS - Setting Up Static Dns 3 On WAG?
Jul 26, 2011I've been having a problem with setting up static dns 3 on my WAG, what has been set is...
Static DNS 1: 208.67.222.222
Static DNS 2: 208.67.220.220
Static DNS 3: 208.67.220.222
Now if I look in my router status screen 1&2 are correctly displayed but the 3rd entry is showing my ISP's DNS,
Multiple Gateway Assigned In Windows Xp But Only 1 At A Time Work?
Jan 24, 2012I have 2 networks ,one is 135.7.31.0/24 for intranet to connect remote office gateway is 135.7.31.253. other is airtel broadband to (network 192.168.1.0/24)connect internet GW 192.168.1.1.both are connected in l2 switch(cisco cat exp500) now I assign 2 ip addresses and gateway in win xp PC with TCP/IP advance settings also set the different metrics for 2 networks , now problem is I cannot connect remote office and internet simultaneously, only one networks connect at a time,
View 3 Replies View RelatedProtocols / Routing :: Change Assigned External Ip Address?
Mar 30, 2011How can I change my external IP address which is assigned
View 1 Replies View RelatedCisco Switches :: SG300 -10 / 16 - IP Based ACL Assigned To Port?
Aug 9, 2012I'm administrator of small network. I wish to replace my old switches by new SG300-10 and SG300-16 managed switches. I have big trouble in my network because everyone can assign IP his neighbour (or any IP) to his network card. I have policy that IP is 172.16.1.X with x is home number. Could I do that IP based ACL assigned to port where is cable from home example 29, permit only IP 172.16.1.29 (mas 255.255.254.0) (from specified port only permit packets with specified source IP (LAN user IP) other (if user set not his IP) is denied) ?
I want know that before buying equipment. How to configure that ?
I think IPv4 Based ACE, action: permit, source IP: 172.16.1.x (nr of home), widcard 0.0.0.0, destination: any, protocol: any, source port: any ?
and in ACL Binding, I have to bound this ACL to port where user whose IP is in ALC is connected?
Cisco Routers :: No Gateway Being Assigned For RV110W VPN Clients
Oct 22, 2012I have a RV110W which is am using as a router (not gateway), because it is connected to the DSL modem (not planning to bridge it) through its WAN port. The DSL modem forwards all PPTP traffic to the RV110W.The only pupose of the RV110W for me is to use it as a VPN router.
Info:
Firmware version: 1.1.0.9
Below are the settings I have:
WAN:
LAN:N.B. The modem runs a DHCP server, so I am relaying the requets to it
VPN:N.B. Also tried with 192.168.0.0 and 12.168.2.0 networks; same thing.
Routing Settings:
Routing Table:NB: 192.168.1.11 and 10 are VPN clients (created automatically).
Firewall:Users are being able to successfully connect to the VPN; however, there are couple of problems:
1. They are not assigned a gateway; hence, not internet connectivty (i want them to use the remote gateway)
2. They are not able to access the 192.168.0.0 network; hence unable to reach their DNS server and other hosts (run a tracert; they couldn't go beyond the RV110W VPN server IP). For this, i tried to turnoff the firewall on the RV110W, and also tried to create and Access Rule to allow all outboud and inbound traffic between LAN and WAN, but no success.
Cisco VPN :: 1921 / EasyVPN Client Gets Assigned IP But Cannot Ping Anything Else
Aug 28, 2011(Router is ISR 1921)This is doing my head in. I am not using NAT, there are no ACLs, there is no split horizon.Here is what I have. It is practically generated by CCP. When connected I cannot ping the loopback interface or the gig0/0 interface, (not to mention anything else).
version 15.0
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname dcsgw1
[code]...
Cisco Routers :: WRVS4400N - Access VPN When Assigned By DHCP?
Jul 6, 2012My ip address of my WRVS4400N changes every so often. when i use the ip assigned to connect remotely, it works until the ip is re-assigned through dhcp. I know there is a way around this bu ysing a name or something. I just don't know how to set that up.
View 1 Replies View RelatedCisco Firewall :: PIX 515e Allow LAN Users To Access ISP Assigned Public IPs
Dec 16, 2012Pix 515e 6.3.4..A web server on our DMZ is exposed for external access.There is an "A" record (webserver.yyy) on a public DNS for this public IP.This works fine for external users. url..Now I have been asked to allowed our LAN user to access the same link and I CANNOT CREATE AN INTERNAL DNS RECORD TO TAKE CARE OF THIS, which means when our internal users access that link, the request goes out of OUTSIDE interface with a NAT overloaded address(111.111.111.2) that is in the same subnet as the URL is trying to resolve. Once it knows the IP address thru DNS resolution tries to comes back in thru the same Interface(OUTSIDE) to hit the web server in the DMZ and is not able to.
1- Where does the request from an internal user to hit url is dropped?
2- what can be done to allow this type of connectivity in the PIX 515e device?
Cisco Wireless :: Wrt54g2 Drops Ip Assigned By Motorola Modem
Oct 15, 2012For some reason, a couple of days from today, my Cisco wrt54g2 drops ip assigned by Motorola modem.It gets it back after a while (10 mins) and works for another 15 minutes.
View 3 Replies View RelatedCisco WAN :: Configure 877W Router As Firewall With DHCP Assigned WAN IP
Nov 15, 2010I'm configuring a Cisco 877 router as my firewall.My WAN IP will be assigned dynamically with DHCP. I will also get my default route from DHCP.I will need to configure ip inspection and packet filtering.I will need to configure NAT, I will eventually need to also configure a dial-up VPN.
View 7 Replies View RelatedCisco WAN :: 5500 - Way To See Expired Guest Users / Assigned IP Address?
Mar 21, 2013We recently implement WLC 5500 Series, I found out guest user once period of that user expired it will not appear at lobbyadmin page where you can see list of users.
Is there any way to see expired guest users and also IP address which assign to guest user?