I've read a lot of threads on this and tried a lot of the suggested solutions... nothing has fixed my problem yet.I'm running Windows XP SP2. I've recently been installing a VPN and setting up firewall rules. I didn't have any problems (was using Comodo firewall) until I installed Sygate Firewall. I've since un-installed but still can't get Windows to connect to the internet via wired or wireless connections[CODE]
View 3 RepliesI want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies View RelatedI�ve assigned the static IP to Server, but when i go back to network properties it show Obtain IP address automatically, however, network working fine with previously assigned IP.
View 2 Replies View RelatedI have 2 servers. 1 is a terminal server windows 2003 sb terminal server.(working fine) and the other is server 2003 small business DC configured with dhcp, dns, SQL, & wins. Last week one of the network programs that is located on the DC started refusing connections.So doing some trouble shooting I noticed that when I ping the server name I get a local address of *.*.*.42 when the address the machine is assigned is *.*.*.5. When I do an Ipconfig /all on the DC it only shows the *.*.*.5 number. I look in DHCP and *.*.*.5 is reserved for the DC Computer. And the *.*.*.42 isn't even in the address leases. I have also looked through the DNS settings and see no alias with the .42 number. And the number does not show up in the reverse lookup zone either.
View 5 Replies View RelatedI've got an issue with one of the businesses I work with. Just yesterday a PC had this problem, and this morning one more followed suit. These PC's were given a 192.168.35.x IP address when configured to take whatever the router gives them, however our Sonicwall TZ190 is configured to hand out a 192.168.20.x IP address over DHCP. There were no secondary IP configurations on the client workstation, no virii, nothing out of the ordinary. When I set a static IP on the client it works fine, but when I put it back to automatic it will once again give itself a 192.168.35.x IP (and subsequently have a gateway of .35.1, somehow). I've checked the router, there's nothing on the LAN side of the network interfaces besides 192.168.20.x.
View 2 Replies View RelatedI have set up DHCP reservations to assigned IP addresses based on MAC address. I have to block my kids access at times, and when I do this they simply change their IP address and they circumvent the blocking.Other than punishing the kids (which hasn't worked - and they need computers and Internet for homework), is there anyway to lock a computer to MAC address to IP address so if they change it they won't get network/internet access?I also tried to set up network filtering and I put in all the PCs and devices I wanted to provide access for, including the router, but when I save changes I can no longer access the internet or the router. I have to do factory reset to get back into router config.Also, I'm on 1.30WW. I know 1.34 exists, which I tried on a previous router which died and was replaced by RMA; but this didn't solve any problems.
View 6 Replies View RelatedI have just set up my asa5505 and while in the sh run I have the following lines
-dhcpd address 192.168.2.200-192.168.2.231 inside
-dhcpd enable inside
-dhcpd dns 68.94.156.1 interface outside
When a client connects to the device like: 192.168.2.215 there is no dns assigned. My devices are unable to access the internet unless I manually assign the dns in the local settings for that host.
I was trying to learn a bit more about routers and therefore tried to acces one of our routers using an external ADSL line at work.The router is a ZYxel Prestige 324. Since I did not have the password I performed a hard reset.Now when I try to acces any website I receive error 105 ERR_ NAME_ NOT_RESOLVEDThe only difference that I can see now is that there is no longer a connection specific DNS suffix assigned.Could this be the issue? If yes how can I configure this?
View 3 Replies View Relatedusing packet tracer, how can i find dns server ip address and i am having trouble pinging the desktops and server that i manually assigned the ip addresses to
View 2 Replies View RelatedIs there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies View RelatedI just rebuilt my network and I've encountered a problem with my wireless access. Right now I have a Dlink 2540B modem/wired router.To that is connected an 8-port Dlink 2208 Switch and a Linksys WRT110 wireless router. All the desktops connect via ethernet to the switch and everything is working fine. I just added the WRT110 and specified it would be a secondary router on the network but as soon as I got it connected it killed my internet. I assumed this was because of DHCP being enabled, which was true once I logged in and looked. I of course disabled it and now the internet is back up on the wired portion and I can connect to the wireless router as well. But the only problem now is that my wireless devices are not being assigned IP's at all. Specifically, my Mac says "airport has a self assigned ip address and will not be able to connect to the internet"How are IP's assigned to wireless devices that connect to the network via a wireless router with DHCP disabled?
View 1 Replies View Relatedconfigure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies View RelatedI'm new to working with the ASA 5505 ,VPN and reverse NAT.
The basic setup is as follows. I'm trying to setup a IPsec site to site tunnel with reverse nat on the remote side.
I have as the tunnel up and it passes traffic. I have setup reverse NAT for 172.x.x.1 to translated IP 216.x.2.101 my ASA also has an IP address of 216.x.2.102.
Any connection from 172.x.x.1 to 216.x.2.1 should appear to be comming from 216.x.2.101
When I ping or telnet from 216.116.86.1 to an open port on 216.x.2.101 I get the banner from 172.x.x.1, seems like it is working.
However in my setup I'm only given a singel IP that of the NAT address 216.x.2.101, so when I remove the IP address assigned to the inside interface 216.x.2.102. all conductivity is lost.
When I set the inside interface to 216.x.2.101 and I setup a static NAT rule for 172.x.x.1 to 216.x.2.101, I get a message that says all traffic will be redirected and I will be unable to connect to the ASA.
Once thats in place, and I make any connection from 216.x.2.1 to 216.x.2.101on any port I get a connection but then it's reset, I no longer get the telent banner I was expecting.
My running config is,
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
I have a Cisco ASA 5510 with a 5 block of IP addresses assigned from our ISP. I am having issues with connectivity and routing traffic from the outside interface to the outside interface. I have my outside interface set up with IP address of 24.182.x.146, it allows internet access and also hosts a web server. Any time I have a client using this device for internet access, I am unable to have traffic accepted for my web server. I.E 100.100.x.52 is using this device, it browses to https://24.182.x.146 and it gets an unable to connect. I am able to connect to the web server from any other ISP/Device. [code]
View 4 Replies View RelatedI've been using this setting for clients in small offices and what not, and since all they wanted was to give another nutch of security to their network, we've been intalling cisco routers 2600 series still outhere for their internet connections and we had no issues what so ever, not until we run into cable isp provider, and their dhcp wont be able to assign our interface a dynamic IP, this is the setting aplied to the router interface;
interface fastethernet0/0
ip address dhcp
ip nat outside
no ip redirects
no ip unreachables
no ip proxy-arp
Why it wont be seen or assigned an ip by their dhcp, I talked to their isp and they assigned a static ip (private one) and we still have the same issue, if i connect a pix 506e interface with the ip add dhcp assigned to it gets a dynamic ip right away...
I have a problem with my AIR-AP1041N-E-K9, i do not seem to get an ip-address assigned after a reset to factory defaults.I do see the AP with CDP:
Device-ID: ap
Advertisement version: 2
Platform: cisco AIR-AP1041N-E-K9
Capabilities: TransBridge IGMP
Interface: gi5, Port ID (outgoing port): GigabitEthernet0
Holdtime: 163
Version: Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
[code]...
I also noticed that when i connect to the AP via console-cable, i can see the AP boot up in the console session, but then i do not get a login prompt, but it seems like the AP is responding; if i shutdown the interconnecting link between the switch and the AP, i do see log messages appearing in the console-connection.I have tried to debug on the Switch, but i need a password, so i can debug, which i do not have.,
I have a Cisco 5520 using ASDM 6.4
Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..
I have a Cisco 1811 router running the 15.1(3)T IOS. I am having some difficulty with the current zone based firewall and the SSL VPN.
When a user connects, they are put into Virtual-Template 1 which has a zone based assignment of "sslvpn". However the traffic report for the users is listed as being blocked by the zone based firewall in the outbound direction(office out to the wan zone).
I'm trying to determine who's throttling our 'Outside' interface because it's being hogged.Is there an easy way to see what data is assigned to what object on our ASA5510
View 2 Replies View RelatedIt is a period of time, of some weeks, since my laptop is unable to access the internet. It succesfully connects to a wireless network, I can see the name of it, but after connecting my laptop is displaying "Unidentified network", below the network name. Also, I don't have Internet access. In the task bar, my wireless icon has an exclamation mark, in a yellow triangle. I have tried to connect with another laptop at a wireless network my laptop can't connect and it worked for the other laptop. So, the problem is with my laptop, not with the network.
[code]....
I am attempting to connect to a residential wireless network on a router that was installed up by an engineer this morning.When the engineer was here he connected an HP laptop using XP to the wireless router. At first there was an issue with the connection (seemingly the same error message I am getting now), he did something to the wireless settings on the laptop, which stupidly I didn't see, and it successfully connected.When I attempted to connect my laptop to the same wireless router I got the same error message:'Connection Unsuccessful'.I clicked Diagnose Problem and got this: 'This computer has got limited or no connectivity'.I first selected the 'Automatically get new IP settings for the network adapter' but this didn't solve the problem. I then viewed the Wireless Network Security Settings and as far as I can see they are identical to those on the HP laptop that has successfully connected: [code] I then connected my laptop to the router using the ADSL cable and was able to connect to the internet, but I am still unable to get a wireless connection. When I view the wireless connections I am 'Connected With Limited Access'.
View 3 Replies View RelatedRecently, I have found out that my laptop is unable to find any networks. I started using what I believe to be an ethernet cable to connect my laptop to the internet because it was faster than wireless. But when I removed the cable and try to connect wirelessly, the computer states that there are no wireless networks in range. I know the wireless adapter is broadcasting because my sister can connect wirelessly to the internet. My WiFi is on, but I can't find any networks.
View 10 Replies View RelatedI am having problems connecting to the internet. It has never done this and just started a week ago. I contacted my ISP and they told me it is not the modems fault. I have a modem and then it goes to a Trendnet 100mpbs Ethernet Switch. Then it goes to my primary computer and then to my laptop. They are all hard-wires. I contacted Acer and they said it wasn't a problem with the computer. When I look at the control panel it says "Unidentified Network" and has no other information than that. I already attempted to manually put in the IP I should be receiving from the modem, but that did not work either.
View 8 Replies View RelatedMy laptop is unable to connect to the internet, all I keep getting is that the network cable is unplugged. I have checked all but cannot find the problem, my grandkids want to use the dreaded laptop.
View 1 Replies View RelatedSince recently I am no longer able to connect to my router from one of my laptops. The connection is failing wireless as well as by cable. My other two laptops are having no problem at all so I think it is a problem with the laptop.I check other posts and found I could do a TCP/IP reset so I have done that.If have executed these commands on a elevated command line:
- netsh winsock reset catalog
- netsh int ipv4 reset reset.log
- netsh int ipv6 reset reset.log
I have restared the laptop afterwards but the problem remains: I am unable to connect to the router.This is the output of the "ipconfig /all" command (command is ran while I've had only the adapter with the cable enabled, wireless adapter was disabled): [code]
My laptop can see available networks, but is unable to connect to any of them.I have run Microsoft Security Essentials and the scan comes back fine, ran CC Cleaner as well as Malware Bytes and those scans both come back fine as well.I have also re-seated my wifi card, as well as attempted a TCP/IP stack repair option.However none of these fixed my issue. What could be preventing my laptop from connecting to a network? I have also tried to boot into Safe Mode w/ Networking, and the pc is unable to connect there either.I have also disabled all security on my router, it is just an open network no security, broadcasting the SSID.
View 14 Replies View RelatedMy laptop is failing to connect to the internet
View 2 Replies View RelatedI'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
[Code].....
I am unable to see my SSID from my laptop where I am able to see other SSIDs but not mine.
I am able to see my SSID from mobile or from other laptop.
Basically, I manage to connect to xbox live with a bridged connection, but I then cannot go on the internet on my laptop, so I am unable to skype.
View 1 Replies View RelatedI have been unable to connect to my wifi on my laptop. I am currently using my moms laptop I know there are 3 wifi hotspots around my house. None of the hotspots show up in my network sharing, yet I'm connected to one of them right now using a dif laptop
View 1 Replies View RelatedI have a netgear wireless router, not sure on the model but can find out if required. My xbox360 is hard wired to the router and my Laptop is connected wirelessly to the router using the internal wireless connection on the laptop. The other half has a laptop too, for some reason her will not connect wirelessly, just gets stuck on a constant loop of ''aquiring ip address'' and does not get past this point. Laptop works if hard wired to the router. how do i get ip address to assign.
View 1 Replies View RelatedI have 2 networks ,one is 135.7.31.0/24 for intranet to connect remote office gateway is 135.7.31.253. other is airtel broadband to (network 192.168.1.0/24)connect internet GW 192.168.1.1.both are connected in l2 switch(cisco cat exp500) now I assign 2 ip addresses and gateway in win xp PC with TCP/IP advance settings also set the different metrics for 2 networks , now problem is I cannot connect remote office and internet simultaneously, only one networks connect at a time,
View 3 Replies View Related