I'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
I have a compaq Presario CQ 60 windows vista 32 bit. I cannot connect to my centurytel westell 7500. I was able to connect to the westell versalink 327W but when I upgraded to the 7500 I havnt been able to connect wirelessly. I can with the Ethernet but not wirelessly. My wifi network adapter is a atheros AR5007 802.11b/g.
Just recently im having trouble connecting to the wireless Using my hp laptop. The Wireless Was previously working fine though recently, has stopped working, all the other devices on the wireless network work fine (Asus Laptop, Iphone's etc). The hp laptop has no problem in connecting to the neighbours wireless and picking up a signal, however, when i go to search for the WAG320N im unable to find it in the list, sometimes it does appear, but after double clicking has trouble connecting to the wireless and will then dissapear from the list. I have tried manually entering the SSID and Password and seeing if it would connect, and also manually entering the IP address however no luck, no other device on the network has trouble finding the broadcast Signal Apart from the HP DV6-3139TX
1. Printer:HP Officejet 6600 2. OS: Windows 7 3. Error: Cannot find printer on wireless network *name* 4. What did I do? Just installed the printer software from HP website.
I got the HP Officejet 6600 and successfully connected it to the network at home. I managed to connect the home desktop (Windows 7), a laptop (Windows 7) and a Macbook Pro. These are all the personal ones.However, when I tried to install the the HP Officejet 6600 on the work laptop, the installation wasn't able to find the printer on the home network when doing it wirelessly. I managed to install it the USB cable but that was about it.Also, when trying to install it wirelessly, it found our home network, couldn't find the printer so it prompted me to type in the IP address for the printer, which I did, however, it still wasn't able to find it. The work laptop is connected to the home wireless in the network connections and the American Express server.Is there a way to get around this issue so I can connect the laptop to the printer wirelessly as it would make life a LOT easier.
i want to simply see my desktop on my tv without cables is this possible without using apple tv or push2tv or whatever else that is out there like that, i have a wireless router a laptop with wifi and a a tv which can connect to both wirelessly, i have no problem sharing files, vids photos etc but how can i browse net on laptop on couch but can see it through my tv.
I have a LG tv with wifi and want to connect rto my Dell lap top (o/s 7)the tv sees the laptop recongnise's its name but when asked to conect comes up with "unknown error"message the laptop shows nothing
I am unable to connect to my network using my d-link wireless adapter. I am able to connect to my neighbor's network and other devices in my house can use my network with no problem. I am absolutely positive that I'm inputting the right password, but am unable to connect.
-Tried to connect to internet, got message "unable to connect to proxy server"
-Decided this proxy stuff isn't worth it, deleted the proxy extension
-Now wireless isn't working on ANY laptop- it shows a connection available but cannot connect to it, however wired connection works (and is how I'm on here right now)Is this as simple as setting up a new wireless connection?
-went under "proxy server" under "LAN settings" in ctrl panel
-The box which stated "use a proxy for LAN" was checked, and the address and port I obtained from hidemyass were underneath
-I unchecked the box, applied the new settings, and reset my router
I received a new hard drive along with recovery discs from dell yesterday. They told me the new drive would be blank and I would have to run the discs. Not a problem. Installed the OS along with the drivers that had check marks next to them.
Today I plug in my home internet and it won't work. Unplug it and turn the wireless back on and it gets online just fine.
We have 2 HP Pavillon laptops working with a Netgear DG834GT wireless router and both working fine until a week ago. Now one cannot connect wirelessly (but can using ethernet cable) the other is working fine. ISP is Sky. Anti virus on both laptops is Bullguard. It does connect for a minute or so but with poor signal quality and speed of 1mb ps and then drops connection. At first it said unidentified network but after various attempts trying to resolve it does now actually say Home Network but ipv4 connectivity which should say internet says no internet access. It does go back to unidentified network and then back to home network intermitently. The only thing that has been done recently was that my husband connected a Samsung Galaxy 2 Tab to his laptop (daughters christmas present) to download items to it and whilst connected he noticed that Samsung Mobile MTP Device installed something. Could this have caused an issue. He cannot see how to remove this. Below is ipconfig from both laptops
The first one is working fine
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersJulie>ipconfig/all
We have 2 computers the main one running OS XP and mine running Vista. Previously, we had no problems with my computer finding the main on the network along with the printer. But now the main computer can see mine (printer and PC) but I cannot connect to the main. Mine does not see the printer nor the PC. We are both running the same virus protection, which is Norton. I really want to use the main computer's printer, which I was able to do until for some reason now I go into networking and it is not there. I know it is marked as shared. When I go into setup network printer and type the name of the printer a window pops up "The printer sever spooling service is not available". I have uninstalled the printer software and drivers and reinstalled but still not showing up on the network? When I click print a document the printer I am looking for is there but it shows as offline, which it is not. I am not 100% sure but seemed to occur when we switched from Mckfee to Norton?
I'm using Untangle on my clients wireless network. It handles all the DHCP and DNS requests. I'm using the web filter option as well. There are two access points, one on upper level and one on lower level. All connect into a switch and then into the optional port on the firewall. Firewall is not set up to give out DHCP leases. Pretty basic setup. Ever since I got Untangle up and running ive noticed my laptop, which has Win 7 as O/S will connect to wireless network, i can ping untangle box, and access point. But no internet. Signal bar shows I have limited connectivity. I thought it was just something on my laptop and set the issue aside. For the record I've never had any issue with connecting to a wireless network with this laptop, at home Im using Ubuntu server to handle all my DHCP, DNS requests on both my wired and wireless network. Never had a problem. Now this client is a library. And I talk to the director, and she has gotten complaints that any patron that uses Win 7 can not connect to wireless. When I'm not there we have a laptop that uses XP, it connects fine. All other patrons that use XP connect without a problem.
I just got a TL- WR740N router and somehow managed to configure it using my girlfriends Acer Aspire One Happy netbook.The internet works fine when the netbook is connected to the router via cable but it can't connect wirelessly to the network I have created. At first some massege appeared saying that there are 2 identical IP's and there is a conflict or something like that. Now it just stops trying to connect to the network. I can connect with my own laptop tho.
I was trying to configure a friend's router, but their laptop wouldn't connect wirelessly. Initially, I couldn't connect via ethernet cable either, but I went into the settings and set it to obtain an IP address automatically. After that, I could connect via ethernet no problem.I was able to successfully connect wirelessly on two different mobile phones.I still can't connect wirelessly to this router (well, technically it says it's connected to the network, but it won't connect to the internet, nor can I bring up the hub settings). However, I can connect to their old router no problem. I'm not sure whether the problem lies with the laptop or the router, and don't presently have another laptop to check
My desktop (that I am currently on) connects fine to the router but I can't get my laptop to wirelessly connect to the router.. it finds it and sometimes it says that it is connected but the connection is broken and can't be repaired. The wireless on the laptop itself says it is also loggen in. I really don't know what to do.. Laptop is an Acer Aspire One Windows XP model number ZG5 Router is Linksis by Cisco model number WRT120N It is Encrypted WPA2 I do have firewalls I am just really confused.. It did connect for like 10 seconds and then nothing.
My laptop only connects wirelessly if it's in the same room (actually, at the same desk) as the router. I just installed a new router and that did not solve the problem. I took the laptop to a pc repair shop and it connected wirelessly there withouto a problem; I also took it to Best Buy and was able to connect wirelessly there as well). So, problem solvers figured it was the router (which was quite old)I've now replaced the router but still can't connect wirelessly unless I'm in the same room as the router!
Okay so I have been troubleshooting my husband's toshiba laptop. Its only a couple years old, has windows vista, and works fine other than it wont' connect to the internet wirelessly. I looked at the adapter card and it says there are no issues and it will connect via ethernet, I just need it to connect wirelessly for school. I would try my wireless USB adapter but is in storage in Texas.
My laptop is not showing the option to connect wirelessly . i was using the internet wirelessly two days ago but now the only option that shows up is connect via broadband ethernet cable. if i go to the control panel and open network and sharing center and i pick connect to the internet the only option i get is broadband. and if i click show a list of options i dont have it only shows dial up connections
I have an Asus N10E laptop that won't properly connect wirelessly, Windows home ver 2002 installed, Atheros AR5007EG wireless adapter, ATT DSL modem, and Cisco Linksys E2000 wireless router. My other computers connect without difficulty. Connection says it is authenticated and excellent but browsere won't load - "Can't resolve domain name". I also tried to download the TSGSysInfo but avast! says it has a virus.
I have a Compaq CQ60. It formerly belonged to a friend (who had no problems with it) and I restored factory settings. However it isn't connecting to my router! Well, it does connect - but it calls it "unidentified" and despite my many attempts it just won't allow me access to the internet. The two other laptops in the house are connected to it fine though. I tried connecting to my neighbour's wireless router, and it worked no problem, including the internet! I bought an ethernet cable earlier, which successfully connected my laptop to the internet. (Although it said I was connected to a homenetwork as well as my Talk Talk router, which it proceeds to call "unidentified" and is restricted to local access). However, I really need it to work wirelessly. I have not been able to use the laptop yet as the ethernet cable does not allow me to leave the router!
I recently configured a linksys range extender to my modem and since doing that, I'm getting a message stating that there is an IP address conflict with another system on the network. When I set up the range extender, I assigned an IP address to it that was different from the modem but yet this message still appears. Also even though my wireless connection is connected, I'm unable to connect to the internet - I keep getting the message 'internet explorer cannot display webpage'.
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
I purchased a new laptop (wireless-n). However, the old laptop I have from 6 six years ago (wireless g) has a faster wireless connection than the new one (20-25 mbps vs. 0.50-1.00 mbps). The 2 computers are at the same location in the house in regards to the router.
I have a Dell Inspiron 1318 Laptop. It uses Vista with Service Pack 2. It does work with the wireless router at my house. It will not connect to the internet at a Bloodbank I visit twice a week. It will connect to their wireless network, and gets a strong signal, but no internet. Other people at this facility seen to have no problem connecting to the internet. I tried downloading updated drivers for my wireless card, but it said I already had the latest drivers. I have turned off my firewall and changed to the lowest security settings. I don't know what to do.
I am working on a Compaq cq50 which I have re-formatted running Vista Home Premium.It connects fine with my LAN, and also connects wireless when I push the wireless switch...however it won't connect wireless automatically when I boot..I always have to push the button.I don't think that is normal.I went to services and stopped the auto wlan and then deleted the existing profile and then re-established the wlan services and account..
I have an Aspire 7520 laptop and want to use it wirelessly on my router, it will not connect or even pick up the signal. I have no problems when i connect via the patch lead. i have uninstalled and reinstalled the wireless driver and i have checked to make sure i have an upto date driver as well. I run off vista, whats confusing me (doesn't take much) is that it was ok when i had my bt router but then changed to sky and it hasn't worked since.
My laptop was fine until I got an I pad for Christmas. It took me two weeks to figure out how to get the I pad online...should have been minutes I am told.now my laptop is off and I can not get it back on line..
I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).