I am unable to connect to my network using my d-link wireless adapter. I am able to connect to my neighbor's network and other devices in my house can use my network with no problem. I am absolutely positive that I'm inputting the right password, but am unable to connect.
View 3 Replies
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
View 2 Replies View RelatedI'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
View 3 Replies View RelatedI have a hard wired connection thought my cable modem, but can not get it thought my WRT160N v2
View 2 Replies View RelatedI have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
View 9 Replies View RelatedI'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
[Code].....
-I was using wireless fine a couple hours ago
-Decided to mess with proxy settings with chrome
-Downloaded "proxyswitchy" chrome extension
-Obtained an IP and port # from hidemyass.com
-Tried to connect to internet, got message "unable to connect to proxy server"
-Decided this proxy stuff isn't worth it, deleted the proxy extension
-Reset router
-Now wireless isn't working on ANY laptop- it shows a connection available but cannot connect to it, however wired connection works (and is how I'm on here right now)Is this as simple as setting up a new wireless connection?
-went under "proxy server" under "LAN settings" in ctrl panel
-The box which stated "use a proxy for LAN" was checked, and the address and port I obtained from hidemyass were underneath
-I unchecked the box, applied the new settings, and reset my router
-Still doesn't connect wirelessly
We have 2 HP Pavillon laptops working with a Netgear DG834GT wireless router and both working fine until a week ago. Now one cannot connect wirelessly (but can using ethernet cable) the other is working fine. ISP is Sky. Anti virus on both laptops is Bullguard. It does connect for a minute or so but with poor signal quality and speed of 1mb ps and then drops connection. At first it said unidentified network but after various attempts trying to resolve it does now actually say Home Network but ipv4 connectivity which should say internet says no internet access. It does go back to unidentified network and then back to home network intermitently. The only thing that has been done recently was that my husband connected a Samsung Galaxy 2 Tab to his laptop (daughters christmas present) to download items to it and whilst connected he noticed that Samsung Mobile MTP Device installed something. Could this have caused an issue. He cannot see how to remove this. Below is ipconfig from both laptops
The first one is working fine
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJulie>ipconfig/all
[Code].....
We have 2 computers the main one running OS XP and mine running Vista. Previously, we had no problems with my computer finding the main on the network along with the printer. But now the main computer can see mine (printer and PC) but I cannot connect to the main. Mine does not see the printer nor the PC. We are both running the same virus protection, which is Norton. I really want to use the main computer's printer, which I was able to do until for some reason now I go into networking and it is not there. I know it is marked as shared. When I go into setup network printer and type the name of the printer a window pops up "The printer sever spooling service is not available". I have uninstalled the printer software and drivers and reinstalled but still not showing up on the network?
When I click print a document the printer I am looking for is there but it shows as offline, which it is not. I am not 100% sure but seemed to occur when we switched from Mckfee to Norton?
I'm using Untangle on my clients wireless network. It handles all the DHCP and DNS requests. I'm using the web filter option as well. There are two access points, one on upper level and one on lower level. All connect into a switch and then into the optional port on the firewall. Firewall is not set up to give out DHCP leases. Pretty basic setup. Ever since I got Untangle up and running ive noticed my laptop, which has Win 7 as O/S will connect to wireless network, i can ping untangle box, and access point. But no internet. Signal bar shows I have limited connectivity. I thought it was just something on my laptop and set the issue aside. For the record I've never had any issue with connecting to a wireless network with this laptop, at home Im using Ubuntu server to handle all my DHCP, DNS requests on both my wired and wireless network. Never had a problem. Now this client is a library. And I talk to the director, and she has gotten complaints that any patron that uses Win 7 can not connect to wireless. When I'm not there we have a laptop that uses XP, it connects fine. All other patrons that use XP connect without a problem.
View 10 Replies View RelatedI have a compaq Presario CQ 60 windows vista 32 bit. I cannot connect to my centurytel westell 7500. I was able to connect to the westell versalink 327W but when I upgraded to the 7500 I havnt been able to connect wirelessly. I can with the Ethernet but not wirelessly. My wifi network adapter is a atheros AR5007 802.11b/g.
View 3 Replies View Relatedacer laptop unable connect wireless to DSL-2730. connects OK through ethernet cable
View 4 Replies View RelatedI recently configured a linksys range extender to my modem and since doing that, I'm getting a message stating that there is an IP address conflict with another system on the network. When I set up the range extender, I assigned an IP address to it that was different from the modem but yet this message still appears. Also even though my wireless connection is connected, I'm unable to connect to the internet - I keep getting the message 'internet explorer cannot display webpage'.
View 3 Replies View RelatedJust recently im having trouble connecting to the wireless Using my hp laptop. The Wireless Was previously working fine though recently, has stopped working, all the other devices on the wireless network work fine (Asus Laptop, Iphone's etc). The hp laptop has no problem in connecting to the neighbours wireless and picking up a signal, however, when i go to search for the WAG320N im unable to find it in the list, sometimes it does appear, but after double clicking has trouble connecting to the wireless and will then dissapear from the list. I have tried manually entering the SSID and Password and seeing if it would connect, and also manually entering the IP address however no luck, no other device on the network has trouble finding the broadcast Signal Apart from the HP DV6-3139TX
View 1 Replies View RelatedI have Windows 7 on Dell N4110. I am unable to connect to my netgear router wirelessly. If i restart the router, it may work for some time but then again gets disconnected. However, i can connect to it through wired connection. Others in my apartment can connect to the router. They dont have windows 7 (they use vista, ubuntu). Its working fine for them. I have tried many things like updating the router, disabling firewall, changing wireless security settings, updating windows but none of them seem to work. My friend who has the same laptop also cant connect when I cant. As soon as my connection is disconnected, his also disconnects.
View 1 Replies View RelatedI'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedHow to connect about 20 IP Cameras sccatered about 1km apart within a residential estate. I need to power the PoE switches at each camera location without cables and all cameras pictures/events must be monitored in a control room though a wireless network.
View 2 Replies View RelatedI currently have a WRT54G wired to my modem, and my two personal laptops connect wirelessly just fine, but my work laptop doesn't support wireless and sometimes I want to work upstairs so I have to run an ethernet cable up the stairs. I was hoping that I could get another wireless router that would connect (wirelessly) to my existing wireless network, then I could plug my laptop into the second router.
View 1 Replies View RelatedHow to Connect 2 wireless routers wirelessly prolink WNR1008
View 2 Replies View RelatedOn the second floor of my house i have my router linksys connected to the modern, and I want to connect a router (linsys) wirelessly on the second floor and on the same network as the router on the second floor
View 5 Replies View RelatedI do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wirelessly but it only works if I also enable the primary ISP connection on my computer - so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off
View 4 Replies View Relatedwhen i connect my laptop to a wireless HP Photosmart 4500 series printer, printer fails to print.I have to connect it with the USB cable to print.
View 1 Replies View RelatedCurrently my network is set up so all machines are on the same workgroup.The server (Server 2008) is also part of this workgroup and has shares set up to only allow access if a client PC is logged in as the same user/password as the server uses.I want to set up a domain on the server so I can install Exchange, but if I do this, will my Workgroup PC's lose access to the server shares?
View 5 Replies View RelatedI have a samsung laptop and a new HP Photosmart (wireless) and no router (and no need for one). How do I connect the printer wirelessly?
View 3 Replies View RelatedI have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies View RelatedI just installed an E1200 router and used the CD to take care of the software work. I Cannot connect to it by WiFi. I still have to use a cable connection.
View 4 Replies View RelatedI have a WRT54G2 router with a desktop wired to it. The desktop is mine and my roommate wirelessly connects with her laptop and has been doing so no problem for about 6 months (ever since we got the router). On Christmas Eve, she was connected, went out, came home and found she'd lost her wireless connection. Now she can't get it back.I can still get online on the desktop.i've power cycled to no avail. What is weird is sometimes she will click on the list of available networks (so she can choose which she wants to connect to) and mine WILL be there, other times it will NOT. If she does happen to catch it at a moment when my network is there, and she tries to connect using the passphrase, it says "Trying to connect" or something to that effect, for like 3 minutes and then nothing happens. Also, not that I would need to, but if I go to "connect to" on my PC (as if I were looking to choose a network to connect to), my network name doesn't always show. It is random. Sometimes it does not even show when I go to "Networks" on my desktop.
View 9 Replies View RelatedI am having trouble to configure the wireless on the Cisco C887VA-W-E-K router.I managed to get the DSL working using cable, but cant seem to connect to the router when i use Wireless. I can see the SSID and when i double click on it i get the Network Key promo. I input the network key, the router seems to try and connect me but then it fails, its as if the router cannot give me an IP address even though i have DHCP configured on the router. Maybe the AP and The router arent linked up?
I have configured many wireless devices in the past, but this new model is different, it seems Cisco have changed their router infrastructure and separated the router from the AP.From the router i can ping the AP IP address and i have the latest IOS - C800-Universal-mz.SPA.151-4.M4
Here is a copy of the config
ROUTER CONFIG:
Building configuration...
Current configuration : 3681 bytes
!
! Last configuration change at 14:11:43 UTC Mon Jun 18 2012
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
I am unable to access files or folders wirelessly between my 2 laptops both running Vista. Both machines can see each other. I can access files with a wired connection.When using wireless I get error message 0x8007035
View 2 Replies View RelatedI am trying to setup my network in my home, so that I can extend the wireless signal from my main router by using an access point (a tenda w311r+).But, I want to do it so that the access point isn't connected to the main router with a cable, I want it to be connected to the main router wirelessly.It does say on the box that it can 'bridge' multiple wireless routers.
The access point I have also has 4 ethernet ports on it, so I will use one of these to plug my xbox 360 into.I also want the main router to be responsible for the DHCP.
I am trying to connect wirelessly to my BT Home Hub via a USB Wireless adaptor. The homehub works perfectly and I have other laptops in the house connecting via the wireless networkHowever, this is the problem. The Wireless connection status shows as good but packets only being sent and not received. Therefore when I load Internet Explorer, I get WebPage Not availableI notice that my IP address is starts with 169 and researching forums suggests that this is the problem and it should start 192? I have tried all sorts of things but simply cannot get this resolved. If I plug the HomeHub into the laptop directly, the connection via the ethernet cable works fine.
View 6 Replies View RelatedI have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies View RelatedA couple nights ago, my wireless router (Linksys BEFW11S4 ver4) just stopped letting me connect to the internet. All the lights were still flashing as they should, I could still go to the setup page, I just could not connect to the internet, both through wired and wireless. I could connect straight through the modem though.
So I decided that since the router was probably over a decade old that maybe it was just its time, and I bought a new one (E1000). I connected it, and still could not connect to the internet. I then did some internet searching and found this [URL] and I followed what was mentioned in post 10 (MAC address clone and changing local IP). Now I can connect through the wired connection and I rejoiced thinking I solved it.
Then I checked my laptop and it won't even connect to the router. It sees the router, but when I ask it to connect, it just says it can't. I decided I was too exhausted to try searching and fixing it on my own and if I tried I'd just end up breaking something out of frustration.
