I am unable to access files or folders wirelessly between my 2 laptops both running Vista. Both machines can see each other. I can access files with a wired connection.When using wireless I get error message 0x8007035
View 2 RepliesI am able to ping and remote dial into my Main PC from laptop, but I am not able to access its folders from my laptop. I can access the network folders on my laptop from my Main PC, so I am confused. I have performed the ipconfig release and renew and flush the DNS and still no success.
View 3 Replies View RelatedOn my network, I have 2 PCs running Windows 7 Ult, and 2 PCs running WinXP-Pro.When my XP PCs browse a shared folder living on a Win7 PC, not all files or folders are listed. It is as if once a certain number of filenames have been listed, something gives up.For example, on my WIndows 7 PC, I have a folder with about 400 folders of pictures. The XP PCs only see about 300 folders. The number is consistent as far as the number of folders the XP clients see. It is not a permission problem, because if I move some of the low-numbered folders out of the share, then the names at the bottom of the folder list start to appear.I even copied all picture folders to the other Windows 7 PC, and created a fresh share and still the XP clients only see the same limited number of folders or files. It also seems to be based on a percentage, and not a finite limit of file or folder names. For example, if I have 700 objects in a folder, only 500 are visible on the client. If I have 400 objects in a folder, only 300 are visible.
View 11 Replies View RelatedIs it possible to share files and folder over wifi internet just as with wired internet ? I have 2 Laptops with built in wifi adapter. Can i make them share files and folders through wifi. (No Router or other hardware)
View 3 Replies View RelatedWe have a several cisco 4400 wireless controllers and a cisco WLC. All clients autheticate to an AAA server. Acces points are cisco LWAP 1242. Security is PEAP TKIP ms-chap. Machine and user authetication. Settings are pushed out through grou policy. A new user can log on to a laptop (without cached credetials) and get all their network settings....most of the time. Randomly we have laptops that after being restarted, recieve "yourdomain.com is not availalbe" error message. The laptops will work fine for weeks and then random laptops start to get this error. If we wire them into the network, run a gpupdate, they logon fine. Shutdown, unplug, and the wireless works fine again.. I am not sure if this is an ms group policy issue or a wireless issue. Any setting change or a gp setting that I may have missed??
Clients are mostly windows 7 some XP Domain Windows 2008r2
ACS 4.2
Group policy settings - wifi config settings enabled and configured correctly Always wait for network enabled.allow fast reconnect disabled (was recommended by a cisco tech) Disabled computer passwords for domain about 2 months ago to see if the computers reseting their passwords were an issue.
i am trying to share files/folder from a win7 system to a winXP system.Some work ok, but some say i need permissions to open (one in particular i would like is C drive from Win7..
View 8 Replies View RelatedHow to set auto backup folders and files in windows2003Should i use inbuilt utility or should i use any Third Party software if software which is the best one that i use
View 1 Replies View RelatedHow to connect two laptops wirelessly
View 1 Replies View RelatedHow can I view a websites files/folders without an account? I'm not trying to 'hack' anything or obtain any data which isnt mine, Theres a website with drivers on it but I dont want to download each 1 indivudually, I would just like to view the folder via filezilla then and queue them all for download.
View 1 Replies View RelatedPurchased a used Cisco 2821 Router and would like to remove all unnecessary files and folders.
My concern is a hacked Rommon or IOS, is there a way to determine this?
Is there a list of directories, files and folders of all of the necessary system folders so I can know what i can delete?
i have two laptops running windows 7 i need to share some files through the network , but after i connected the two laptops by an internet cable , it says that " local are connection " network cable unplugged
View 14 Replies View RelatedI have a desktop computer, Sony VAIO laptop, and a Motorola router. The computers are both running Windows 7 Professional. The desktop computer is running 32 bit Windows and the Laptop 64 bit.
My network appears to be Windows Homegroup which got setup after a crash of the desktop. Previously, I ran a network setup with Motorolas tech support and it ran fine (before crash and reinstall on desktop computer). I had access back and forth between both computers. I would rather not run Windows Homegroup but it looks like I am stuck with it if there is no way to remove it and resinstall another network or unless I can have two networks on my computer.
The error message that I get when trying access my laptop from the desktop is
"Windows cannot access \name-VAIOackups You do not have permission to access \name-VAIOackups"
I have set file sharing on both computers and am running all files as administrator. How can I regain access between these computers?
Region : United States
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I just got the TL-WDR3600.
It seems to work fine and my Smart TV recognizes my network drive or usb hdd connected to the router.
However, the files on the network drive or usb hdd don't seem to appear/work. The folder the files are stored in are recognized, but not the files themselves.
I've plugged the usb HDD directly to the TV and it recognizes and plays the movie files fine, however when trying to find them via the wireless router, they don't appear/work.
Are there some settings i need to change to allow the TV to see/play the files?
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
My Laptop IP 192.168.0.198 cannot see shares with desktop 192.168.0.199. Both PC's are win 7 with firewalls turned off. However the desktop can see shares on laptop. All computers are part of WORKGROUP. When wireless i can ping desktop.When i plug Ethernet cable to laptop 192.168.0.196 I can access desktop files.Also weird thing i have turned off password protection sharing but still asked for password (can live with that though)
View 1 Replies View Relatedi have 2 dell computers (and more but just worried about these two for now)... mainpc and sparepc, i had sparepc hooked to my tv and all pc's in the house, and a tv, networked to it... it all worked great, after a few minutes of setting it up... and then the hard drive crashed on spare pc and i got a new one, installed windows again both pc's use the same installation disk both pc's are hooked to a workswitch, which is hooked to a uverse gateway (router)... but it should be noted that hooking everything to wireless changes nothing... i get the same results can reach out to anything in the house and network great... but nothing can connect to sparepc... it keeps asking for username/password, even tho none is set I've gone through all the file sharing, homegroup, and folder options... ive reset ownership on folders and permissions... ive tried making/changing user profiles... but i cannot get from mainpc to sparepc home group does not work because the network does not work. as soon as the network works, homegroup will spring to life (at least, thats what happened the last time) if i right click on a folder, go to properties, share tab, and hit the share button... it asks for permissions for users... i set them, hit share, and it comes up and says, "you cant share this folder" ... with no explanation
View 1 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI have a wrt120n wireless router and use Network Magic Essentials with 2 computers on my network. It has worked fine for about 2 years. I recently upgraded the desk top from an XP pro service pack 2 to a service pack 3. I am now unable to receive files from my laptop which is a Vista or print from the laptop. I can receive files on the laptop from the desktop. I am running McAfee and have spent about 3.5 hrs with a tech there but they have not been able to find any problems with their system.
View 3 Replies View RelatedThere would appear to be a general problem with printing from a wireless laptop, judging by the number I've come across in the search for a solution to my particular problem.My Set-up is:BT Home-Hub (up to 8 MBs Broadband DSL connection with outputs of two ethernet ports and Wifi, telephone and USB
- port 1 connected to Vista PC
- port 2 connected to 8 port Netgear switch.
Netgear switch.
- port 1 input from BT Home Hub
- port 2 connected to TV
- port 3 connected to NAS
- port 4 connected to Samsung CLP 620 ND colour laser
- port 5 connected to this desktop PC (Win 7/64bit)
- ports 5 to 8 as yet unused.
Other PCs
- desktop running XP SP3 connects through WiFi
- old Toshiba laptop running XP SP 3 connects through WiFi
- new HP laptop running Win 7 SP 1 connects through WiFi
- Acer laptop running Win 7 SP1 connects through WiFi.(WiFi computers not necessarily connected all at the same time)
The issue.This desktop can print via the network..All XP pcs/laptops see the printer on the network and can print..The Win 7 laptops see the printer on the network, but when asked to print a test page, the document gets stuck in queue until it gives the Error - printing message. If the printer is sleeping, when the test page is sent, the Samsung print dialog panel on the laptop remains showing "Printer is sleeping..." as if no commands are being sent to the printer (and therefore why nothing prints). Cancelling the document returns the printer to normal - ie the exclam mark in the yellow triangle disappears and is replaced by a tick. When the laptop is shutdown, and then restarted maybe a day later, if the printer is on, it jumps into life and prints the test page from the laptop.I should add that the laptop is also part of the HOMEGROUP and can see the printer via this PC when this PC is on - and it can print via this PC in the HOMEGROUP. Both the problem laptops have the up to date Samsung drivers although it took an age to install - it seems to get stuck on the "Detecting TCP/IP Port" page and then goes to a page headed Additional port info required. On selecting Samsung Printer, it moves on to Detecting Driver Model, gets stuck there until it moves on to the old Add Printer dialog with Manufacturers in the left pane and printers in the right.
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies View RelatedWe recently switched from cable internet to Verizon DSL since my roommate moved out and took his equipment with him. I set up the wireless router last week and got my laptop to work on the wireless connection. Now I am unable to get my boyfriend's computer to connect to it, when it never had this issue before with the previous wireless. The first day I had it set up, it said it connected, with an "excellent" connection strength, but then the status was 'unable to connect.' I was on the phone with the Verizon guy, who after doing a screen share, said it was my IP address.
So I tried resetting my IP through the CMD, with no luck. Now it doesn't even let me connect to the wireless at all. I've tried both the Intel PROSet/Wireless and the Microsoft client to connect (this is running Windows XP) and when I click 'repair' on the Microsoft client, it tells me it couldn't be corrected because it could not renew the IP address. The firewall is currently off and I removed the defunct McAfee that was never renewed anyway[CODE]
I've networked 2 PCs both on xp, one home one pro, through the router/modem. I get an error message saying contact your system admin when I try to read shared folders on the home from the pro version - I am the admin! The other way works fine.
View 5 Replies View Relatedam running 2 PCs (one desktop and one laptop) both with windows vista home premium, both are in a home group, are connected by a DIR-615 D-link router/wireless access point, and have file sharing and network discovery enabled, but when I try to access the public folder on either PC from the other I get "The network path could not be found".When I try to troubleshoot this it tells me my modem is having connectivity issues and attempts to find out "why I can't connect to the internet" which is extremely bizarre, as this has nothing to do with the internet connection, I simply wish to access the public folder on a private network
View 7 Replies View RelatedSome of my colleagues went away for holidays. When they came back, all 4 of them can't access the shared folders on the server. They could before they went away but now they can't.They can access the internet through the network however and other colleagues including me can access the same shared folders.It is a QNAP server NAS version 2.3.0 Build 0825T,The problem users run Vista and one XP. I have checked that all users are still granted permission to view the shared folders and they are.I can't understand why it would not work for them but work for us...
View 3 Replies View RelatedDesktop won't connect to internet. I have a Belkin router and my laptops connect to the internet. My Netflix Rokus connects to the internet.I have tried your suggestion with reset winsock and reset IPv4 TCP/IP stack to installation defaults,etc. [code]
View 10 Replies View RelatedMy son connects his xbox360 to his laptop that uses a wireless access to the router. My husband and i both have a laptop and when we try to log on to the internet it takes forever or doesn't connect at all while son is on his xbox 360. Do I need to change up my router?
View 1 Replies View RelatedI want to copy a font file from the Fonts Folder in networked PC (B) but can only see Documents Folder and subfolders. Windows 7 OS. I'm working in main PC (A) -- No monitor, mouse or keyboard connected in PC (B).
View 3 Replies View RelatedLet me start off by saying both computers are running Windows 7 Pro x64, both have file and printer sharing turned on, use 128-bit encryption, password protected sharing is off and Windows manages homegroup connections.
Computer A cannot access its own or others shared network folders through the network icon on the desktop, I get the message "Windows cannot access \Computer-AMy Documents" and if I try to access Computer B it gives me "Windows cannot access \Computer-B". Computer B can access Computer A through the network with no problems. The folders have had the permissions set to Everyone.
not access for win 7 share folde but system is workgroup
View 3 Replies View RelatedI have got 2 workstations: test-pc and laptop-pc. Both 2008 server Sp1 x64 Both are added to Domain - 2003 server x86.My problem is:I cannot access shared folders on laptop-pc From test-pc if I am not physically logged in onto both machines. When I logged in as an administrator on both - everything is fine, but if I will turn laptop-pc on and leave it on Windows logon screen (without login) I wont be able to access anything on it.Is there anything I should enable/disable on Domain Group Policy to fix it?
View 1 Replies View RelatedI have a new Linksys E2000, I was unable to connect one of my laptops to the internet, so I decided to call support with the problem, after 45min and not results, find out that the E2000 do not support the Atheros AR 5007, they told me that I need to get a new driver for my adapter. Fine but Cisco doesn’t have a Driver update for this problem or how to fix it, or at least send you a link where to get the fix.
View 4 Replies View Relatedshared folders showing access denied message in server 2003
View 2 Replies View RelatedSuddenly Can't access shared folders but others can . Laptop with Vista. Had many Mapped [COLOR=blue !important][COLOR=blue ! important]Network [COLOR=blue ! important]Drive[/COLOR][/COLOR][/COLOR] issues about 2 months ago. Finally all resolved. Laptop was gone from our shop for about 2 weeks. Now it cannot see the Shared Folders (except for Public and Printers), and could not re-connect the Mapped Drives. Accesses Internet, can Ping the other PCs(all running Win7). Connect thru Wireless.
Why SUDDENLY, there are no shared folders visible on a Laptop?
Notes: This is the 2nd time this has happened. I changed alot of settings the first time. I re-checked all the settings this time.
Update: Magically works today 12-3-12. But what caused it? Why does Vista loose the ability to map network drives, when nothing
changes...I still want to know why for the next time this happens.