Sharing :: Unable To Access Shared Files On Server - Network Path Not Found
Sep 20, 2011
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
View 3 Replies
ADVERTISEMENT
Mar 11, 2013
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies
View Related
Dec 26, 2012
Recently I've changed my all local I.P. series in the server from 192.168..to 10.219..& the server 2008 providing through DHCP.So, I've to re mapped the share folder to change the path in every system.But few files in 1 PC are still keeps the old share folder path when trying to open & failing or taking long time! NOT all files in that machine
View 1 Replies
View Related
Mar 23, 2011
I have always connected to other computers in my network, including my file server, and all of a sudden, it will not work. This is only happening on one computer. You can connect fine on all the others. I am running Windows 7 SP1, and in the network window, I can see the computers, but when I click on them to connect, it says "The network path was not found". If I access them via their IP in windows explorer, then I can access them . I have never seen this before. I attempted to disable Norton, I even un-installed it, and it still does the same thing.
View 1 Replies
View Related
Apr 15, 2011
Have a server linked to four computers and a laptop for a business and can't seem to access shared files on server from other computers as it keeps asking for username and password to access it. Have tried to change from workgroup to domain that the server is on so to create username and password but error message keeps coming up 'a domain controller for the domain ata.local could not be contacted or if just use ata as domain it does not accept any username or password. Also have tried suggestions in other forums such as simple sharing and creating an account on other pc's with same username and password as server. All of the systems are windows xp and the server is windows standard.
View 3 Replies
View Related
Feb 12, 2011
On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
View 1 Replies
View Related
Sep 10, 2011
I am trying to share some files from my windows desktop PC, other windows devices on the network can access those files, but a laptop that runs Ubuntu and a WD TV Live, which runs its own OS cannot access the shared files. I had this problem a few weeks ago but it somehow fixed it self but the problem is back again.
View 1 Replies
View Related
Dec 4, 2011
#1 windows 7 computer has a wired connection and #2 windows 7 computer has a wireless connection. When at #2 and trying to save a file to #1, the save time may be about a minute. When doing the same thing from a computer #3 with windows xp, the save time is a few seconds. Tried safe mode with networking. Same thing. Tried disabling remote differential compression. No change. The three computers are in the same workgroup.
View 3 Replies
View Related
Apr 17, 2012
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies
View Related
Aug 20, 2011
We've recently installed Windows Server 2003 at our small office for data storage, and have set up shared folders in the Win Server 2K3 for access from about a dozen Win XP Pro machines.Upon the first access of these shared folders from a Win XP Pro machine, we're required to enter a User Name & Password for the Win Server 2K3 machine:Is there a work-around for this? Perhaps some method in WinXP Pro to save the username/password? As it stands now, any time one of the WinXP Pro machines gets rebooted, or if the server gets rebooted, users of the Win XP Pro machines have to re-enter the username/password, and I'd like to find if there's away around having to re-enter that info.
View 5 Replies
View Related
Aug 19, 2012
I have a small network running in my language academy which is causing me some issues. We have a server running Win XP with two folders, one for the teachers which is password protected and the other for the students which doesn't require a password. Up until two days it has been working well. However now the server keeps disconnecting from the internet quite randomly which stops us from connecting to the shared folders.
I've noticed that a caution icon appears next to the ethernet icon in the task bar when this problems occurs on the server. I have tried to right click and choose the repair option but it tell me that it cannot resolve the ip address. In some cases rebooting the server resolves the issues but in many case it doesn't.
View 1 Replies
View Related
Jun 29, 2012
I was hoping to be able to save a file on one computer and for it to be accessed from a computer in the next room.The first computer is connected to the internet and when emails are received I would like to save them to a folder in my documents and then be able to go onto the other computer, go to my documents and open the file I just saved from computer one.
View 5 Replies
View Related
May 24, 2012
I hav a Network area storage server where all my files are stored. The Folders are shared on the network the shared folders were working fine but suddenly i was unable to access these folders .I tried to Map the network drives by IP address that is ""\ipaddressshare""of the NAS server but was unable to do so. It Gave me an error message ""No Logon Servers are currently available"" . But when i put my server Name that is ""\servernameshare "" i am able to map the folders. Why am i unable to access my shared folders on the NAS server by IP address . I have checked the IP adress connectivity and everything but it is all fine .I can even ping by ip address of the NAS serve
View 5 Replies
View Related
Feb 11, 2013
i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies
View Related
Dec 6, 2011
I have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP P
View 1 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Mar 5, 2013
I am trying to transfer files from Laptop A to Laptop B. I can transfer files from B to A, but I can't transfer them from A to B. When I try to, I get an error message saying "Windows cannot access Laptop A".It then gives me the option to diagnose the problem (I'm using Vista on both laptops, by the way). When I click that, it gives me the error of "Cannot communicate with Laptop A. We pinged the remote host but did not receive a response".Laptop A is connected to the network according to it, it can access the internet fine and can access other laptops on the network fine. I have disabled the firewall, shared the folders appropriately, made sure they were both on the same workgroup (they are both on the default Vista WORKGROUP), and still nothing.
View 19 Replies
View Related
Jun 15, 2012
I thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious. I just installed the 4200v2 as a replacement for a NetGear. I bought for the n performance and the USB for a shared disk/media file server. I connected a640G Western Digital My Book to the USB. I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message. My computer is a 6 month old HP with Windows 7 running Bitdefender Internet. I found I could get to the drive from my wife's Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said). After doing some Internet mining, I found that the issue is the Netbios setting in IPv4. My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200. Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center. Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced. Go to the Win tab and select Netbios enabled.
View 1 Replies
View Related
Jun 19, 2012
I am unable to access network shared documents and programs on Windows 7... the problem is more that I am simply unsure of how to proceed more than some sort of hardware or software problem.
View 1 Replies
View Related
Jan 19, 2011
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies
View Related
Mar 14, 2012
How to access files shared on a windows pc from a linux xubuntu pc? i tried to use the "Gigolo" app but it didn't do anything pyneighborhood saw the computers on the network but didn't able to go into the shared folders...
View 4 Replies
View Related
Aug 7, 2012
There are no IT employees at my small company and everyone else has started coming to me with their computer issues. Normally it's fairly straight-forward, but I've never come across this one before.We've got a computer that's connected to the network and has internet access, but cannot access the network drive like the other computers can.The shared drive is found under computer --> network location.The operating system is Windows 7.I've tried disconnecting from the network and reconnecting, and mapping the network drive.
View 1 Replies
View Related
Dec 2, 2011
When I'm trying to access a computer within our network, I could not access it and this is the error message "\computer_name is not accessible. You might not have permission to use this network resource.Contact the administrator of this server to find out if you have access permission. There are currently no logon servers available to service the logon request".
View 11 Replies
View Related
Dec 3, 2012
Suddenly Can't access shared folders but others can . Laptop with Vista. Had many Mapped [COLOR=blue !important][COLOR=blue ! important]Network [COLOR=blue ! important]Drive[/COLOR][/COLOR][/COLOR] issues about 2 months ago. Finally all resolved. Laptop was gone from our shop for about 2 weeks. Now it cannot see the Shared Folders (except for Public and Printers), and could not re-connect the Mapped Drives. Accesses Internet, can Ping the other PCs(all running Win7). Connect thru Wireless.
Why SUDDENLY, there are no shared folders visible on a Laptop?
Notes: This is the 2nd time this has happened. I changed alot of settings the first time. I re-checked all the settings this time.
Update: Magically works today 12-3-12. But what caused it? Why does Vista loose the ability to map network drives, when nothing
changes...I still want to know why for the next time this happens.
View 5 Replies
View Related
Mar 14, 2013
I am able to ping and remote dial into my Main PC from laptop, but I am not able to access its folders from my laptop. I can access the network folders on my laptop from my Main PC, so I am confused. I have performed the ipconfig release and renew and flush the DNS and still no success.
View 3 Replies
View Related
Jun 20, 2012
I am unable to connect to my desktop's shared folders, and get the message "network path not found" when attempting to go into the desktop. The desktop is connected to the router wirelessly, a pace 2wire gateway, and wirelessly on the laptop. I can see it in the list of devices connected to the gateway, as well as the network folder. I am unable to ping my desktop from the laptop, but i can do so the other way around (desktop can ping my laptop). This is despite turning off windows firewall on the desktop. This started happening right when i got the SP2 upgrade for the desktop, it's a vista system.
[code]...
View 14 Replies
View Related
Aug 3, 2011
I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
View 2 Replies
View Related
May 18, 2012
I thought that there are more security issues than LAN issues, I have a network with 11 computers of which 1 is SME server and 10 are clients (mainly 256MB DDR1 tech machines withceleron D processors, onboard VGA and sound; there are few 1024MB DDR2, AMD Sempron LE processors). All clients have XPSP3, .NET framework 1.1+2.0, Office 2003, AvastFree 7.0, Mozilla Firefox 7.0 and several utilities not very important. Every client has 2 users (Admin and User) on Local Machine and 1 on DOMAIN (UserDomain). Both User accounts are limited. First, all computers were in same workgroup and not part of DOMAIN. In that time, printers on clients were shared among themselves and worked flawlessly. After joining the clients to the DOMAIN, the work continued without issues. One day, I have changed the name of the SME SERVER computer and the issues have started. Several clients can not connect to those shared printers, even others are using them well. When I want to add shared printer I can not browse the particular computer on which the shared printer is (through ADD PRINTER wizard). I manage to do it writing the full path of the particular computer and there I can choose the printer.
After selecting it, username and password is required to finish the adding. Of course I use the Admin username ad password, and after typing it error message pop up (printer is unavailable or can not connect to it). After this I close all windows, start the adding procedure again, and then I can add the printer normally. The problem continues, because, on those computers on which I have had this complicated way of install, after several days shared printers refuse to print saying Access denied. Then I have to delete the printer again, install it twice and hope to work after that for a weak at least.
The problem is getting bigger, as on one client computer I can not print from browsers (Firefox 7, IE 8) but from Office there is no problem. Of course I have checked other topics about this and use setups-modifications-advices but they did not solve printing problems. I have even reinstalled that computer, but the problem remains.
View 5 Replies
View Related
Oct 25, 2012
Our previous wireless router (Netgear Rangemax wpn802) died yesterday so I went out and bought a Western Digital My Net N900. The issue is that now anyone using the wireless signal can't connect to a shared network folder that they were previously able to connect to using the old router.
I'm not able to log into the old router to see any of its settings. I do have access to the server that has the shared folder - I just don't have any idea what needs to be set in order for the N900 to allow me through to the shared folder - whether it's on the router side or the server side.
[code]...
View 14 Replies
View Related
Aug 14, 2012
I have a server with two adapters: 192.168.1.200 and 10.99.1.200, 10.99.1.200 connects to a cisco router 10.99.1.254 (which I have no access to). This connects via WAN to another network to transfer files to another company. 192.168.1.200 is connected to our local LAN. I have a service that uses FTP to get and send files to a server through 10.99.1.200. I recently had to switch our IP scheme from 10.99 to 192.168 and since then haven't been able to send files to the ftp server. My question is, would a router solve my problem? If so, would I; remove the 10.99 adapter, connect 192.168 to the router, connect the router to the switch, connect the 10.99 gateway to the new router (and update any appropriate routing tables on the server)? The service appears to have issues with using a dual homed server and updating it isn't going to happen anytime soon.
View 3 Replies
View Related
Jul 13, 2011
i have been wanting to do this LAN sharing thingy for a while now.so here's the deal.i wanna do is setup our PC's so we could create a network of our own and share files just like in LAN but not over the internet.its kinda like we would on a Homegroup in win7.also have a few more PC's on different ISP's.can they be added to the network too?
View 7 Replies
View Related
Nov 6, 2012
Okay so I had all this set up to be simple back in windows 7.
Basically, what I did was turn off password required sharing or whatever, so all I had to do was click on networks in the left side panel when i was in My Computer and click on say, my wifes laptop and it'd open the public folder she had there, and I could drag and drop stuff into and out of it. And same for her and seeing mine.
Now that I have windows 8 on my PC It's all buggered up.
I didn't change ANY settings on HER laptop, but when I try and access it (I used it to back up important files while fresh installing w8) it's asking me for a username and password
View 3 Replies
View Related
Oct 12, 2011
I want to know which protocols are used to share files via lan.Both the machines are running windows.
View 6 Replies
View Related
