Error Occurred While Connecting To Network Path Was Not Found
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
ADVERTISEMENT
Feb 11, 2013
i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies
View Related
Feb 12, 2011
On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
View 1 Replies
View Related
Jun 15, 2012
I thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious. I just installed the 4200v2 as a replacement for a NetGear. I bought for the n performance and the USB for a shared disk/media file server. I connected a640G Western Digital My Book to the USB. I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message. My computer is a 6 month old HP with Windows 7 running Bitdefender Internet. I found I could get to the drive from my wife's Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said). After doing some Internet mining, I found that the issue is the Netbios setting in IPv4. My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200. Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center. Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced. Go to the Win tab and select Netbios enabled.
View 1 Replies
View Related
Dec 6, 2011
I have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP P
View 1 Replies
View Related
Mar 23, 2011
I have always connected to other computers in my network, including my file server, and all of a sudden, it will not work. This is only happening on one computer. You can connect fine on all the others. I am running Windows 7 SP1, and in the network window, I can see the computers, but when I click on them to connect, it says "The network path was not found". If I access them via their IP in windows explorer, then I can access them . I have never seen this before. I attempted to disable Norton, I even un-installed it, and it still does the same thing.
View 1 Replies
View Related
Dec 25, 2012
I have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz.
View 1 Replies
View Related
Feb 24, 2011
OS: Windows Vista Home Premium?Trying unsuccessfully so far to reconnect a client machine to a wireless network that it has been on for a year or so.ISP was down for about 2 hours the other day and when it came back up, the client machine started getting the IP address conflict. Went in to release and renew and got the following error messages:
on release: An error occurred while releasing interface Wireless Network Connection: An address has not yet been associated with the network endpoint.
on renew: The DHCP client has obtained an IP address that is use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
The next thing I tried was to go in an give a manual IP address to the Wireless Adapter. But the TCP/IP properties are greyed out and I receive the following error message:Some of the controls on this property sheet are already open. To use these controls, close all these property sheets and then reopen this one.
View 1 Replies
View Related
Sep 20, 2011
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
View 3 Replies
View Related
May 1, 2012
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies
View Related
May 19, 2011
I am getting "an error occurred while reconnecting...etc" when a previously successful drive mapping suddenly does not work. The short answer is to disconnect, then re-map the drives, but that is a real pain when you are accessing the same shares all day, and it seems to drop out whenever it feels like it.
View 1 Replies
View Related
Apr 21, 2011
why cant i sign in to my psn ?
View 5 Replies
View Related
Apr 28, 2011
i have a problem with the playstation 3 system when i sign in it takes a while todo that all of a sudden a error appeared on my screen saying "An error occured (80023121)" and me and my dad try to fix the problem but nothing seems to be working
View 1 Replies
View Related
Oct 12, 2011
I'm working on a Dell Vostro 220s running Windows XP with an integrated NIC. It had a few hundred viruses on it and after removing them, I can't get an internet connection. The icon says connected with 0 packets sent and 0 packets received. DHCP is enabled and other computers on the network can connect to the internet. The drivers are installed and detected as working properly. I have rebooted also, with no luck. Ipconfig fails with the error "An Internal error occurred: The request is not supported."
View 8 Replies
View Related
Jan 3, 2012
trying to export WCS data in order to migrate to the NCS but getting bellow error messages while following the Exporting WCS data doc:
D:Program FilesWCS7.0.172.0in>export D:wcs.zip
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
The procedure i am tring to follow:
To export WCS data, follow these steps:
#Step 1 Stop the WCS server.
#Step 2 Run the export command through the script file and provide the path and export file name when prompted.
#Step 3 For Linux, run export.sh all /data/wcs.zip. For Windows, run export.bat all datawcs.zip.
I do have enough available space, the WCS runs as VM
View 7 Replies
View Related
Nov 3, 2011
I have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:
An error occurred while reconnecting F: to \SERVERData
Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.
View 6 Replies
View Related
Nov 28, 2011
i have a laptop running Vista which will connect to wireless network, but will not connect to internet. I have tried connecting direct to router and also deleting wireless connection & reinstalling with no luck. I can however use a mobile broadband usb dongle and connect to the internet with no problem - appears to be a problem with connecting via something other than mobile broadband?
View 1 Replies
View Related
Apr 7, 2011
My Dell XPS (Windows XP) is not connecting to my network..can't get anything to show up on the networks in range list. My other laptop is fine. But I just upgraded to Firefox 4 on the Dell, and then the connectivity went askew.
View 2 Replies
View Related
Apr 28, 2011
Connection denied due to NAT reverse path failure
View 2 Replies
View Related
May 5, 2010
have just set up a WLC 4402 as a Guest WLAN controller on the DMZ of our network. I have successfully managed to get our internal controllers to connect to it, with the exception of 1. it says the control path is up but the data path is down. the other 14 controllers worked fine, and in testing the last one was OK but it is now not working properly. the 2 controllers can ping each other but just won't create the data tunnel. there is a firewall in the middle but that has been set up to allow traffic between the 2 groups of controllers to be unrestricted.
the internal controllers are 4404's and all controllers are running the same version of code. 5.1.151.0.
View 31 Replies
View Related
May 23, 2012
For the past week I've had a problem browsing the internet. Now, at first, this only happened starting at around 3 am central time and ending at about 6 am when I could browse the internet properly. As the days went forth, however, it began happening earlier at around 12 am. What would happen is this: would be on the internet browsing sites and whatnot. All of a sudden (As I'm loading a new page) I would get the "Address not found" error as if I'm not connected to the internet. I could try to reload any other page on my session,but sometimes it would halfway load (ei:not loading pictures, ect.) and other times I would get Address not found. This would go for about a 4 hour time period. After that, everything would be back to normal and I could go back on my session.
Now, I'm on my laptop via a router that is in my house. We also have a desktop computer, but I noticed this problem happening on my laptop first. When it first happened, it was only on my laptop. I had internet connection and could browse it endlessly on my desktop. As the days went on, however, my desktop started having the same problem connecting to the internet (I still noticed the problem on my laptop first and then I would go see if the desktop had it too).When this first happened, I was thinking my laptop wasn't connecting to my router. Instinctively, I reset the router to no avail. I also opened up IE (I don't use it much because it's just too slow) and tried to diagnose the problem using that. When I did this, it was giving me DNS as the problem of me not connecting to the internet. I am not a network admin so I don't know that much about DNS. I also used IE to diagnose the problem on the following days, but after the first time it only gave me a "You aren't connected to the internet" solution. Since then, I've been running a barrage of anti virus, rootkit, ect. just because I can and I haven't done it in a long time. I didn't find anything unusual in all the reports so I'm still not sure what the problem is.
View 3 Replies
View Related
Nov 12, 2011
I am trying to install the WLAN driver for Dell Dimension 9200C desktop computer running Windows XP but I keep getting the error that no compatible hardware was found. I've gone to the appropriate Dell Drivers site for the computer's model and I'm 99% sure I downloaded the correct software for WLAN: Dell Wireless 1395 WLAN MiniCard. After going to Device Manager and looking under "Network Adapters", there is no Dell WLAN card at all (direct ethernet connection for internet works). Is it possible that the computer cannot find the WLAN network card, which prevents me from installing the driver software, even though it exists? If so, what can I do? If not, I guess I'll go buy a USB network adapter.
View 2 Replies
View Related
May 7, 2011
My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.
View 5 Replies
View Related
Jun 20, 2011
i have a SMC8014WG-SI Router and its gateway is 192.168.0.1 but when i type it in the router doesn't appear at all , just says that the page cannot be found. i like portforwarding and need to be able to login the router to do so.
View 9 Replies
View Related
Sep 10, 2012
even after installing t driver,i'm getting t same error message.Wifi adapter cannot be found
View 1 Replies
View Related
Feb 18, 2012
We are monitoring everyday C-2500 router, the CRC and input error are increasing day by day.This are current readings as observed on 18 Feb.
C-2500-R1#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
[Code].....
View 1 Replies
View Related
May 14, 2012
net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network
View 3 Replies
View Related
Jun 22, 2012
I have been having this issue for the past one week where though i am able to connect to the internet through the wired lan without any problem when i connect it to my buffalo wzr - hp - ag300h router it disconnects within 5 minutes and on trying to check the internet connection DHCP server not detected error is shown. I have another edimax router and i tried to setup wireless with that router and have the same problem of disconnection after 5 minutes. [code]
View 14 Replies
View Related
Jun 26, 2011
Error message
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.16/53
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.166/53
[Code]....
I thought it needed a nat (c_dmz) command but I got the following error message
PIX(config)# nat (c_dmz) 0 0.0.0.0 0.0.0.0 0 0 nat 0 0.0.0.0 will be identity translated for outbound WARNING: Binding inside nat statement to outermost interface. WARNING: Keyword "outside" is probably missing.
View 2 Replies
View Related
Mar 2, 2012
on IOS versions higher than 12.2(50) on Cisco 3560G-48TS I get this error/traceback, when I reach a certain number of Access-lists group'ed to "interface vlan", and the ACL inserted in the TCAM reaches acl label #128 (can be seen with : Show platform acl label 128)I can see errors in the TCAM if I issue the command
View 21 Replies
View Related
May 31, 2011
I have a 5510 with just a inside and outside interface, everything works on the lan inc internet access and exchange hosting to the net, but I have another exchange server on the wan and I can't get to that because I'm not natting inbound traffic and the default route sends traffic elsewhere.
If I put a nat any statement on the inside interface inbound it works, however all LAN internet traffic fails with a No translation group found error.I've removed the static nat commands as they are all named anyway, but below is what I have before I do a nat any inside inbound command global (outside) 1 interfaceglobal (inside) 2 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0.
View 3 Replies
View Related
Jun 20, 2011
Cannot turn off my windows firewalls on my vista toshiba after removing a scam Vista antivirus spyware download.. Cannot access any ports,Whenever I try to open a web browser, my disk defragmentation, ccleaner
View 1 Replies
View Related
Apr 3, 2011
I have Cisco ASA5510 OS version 8.4(1), when i try to apply static command, this command is not found, the NAT issues used nat(inside,outside).
So why i can't found this command ?
View 1 Replies
View Related
