An Internal Error Occurred - The Request Is Not Supported
Oct 12, 2011
I'm working on a Dell Vostro 220s running Windows XP with an integrated NIC. It had a few hundred viruses on it and after removing them, I can't get an internet connection. The icon says connected with 0 packets sent and 0 packets received. DHCP is enabled and other computers on the network can connect to the internet. The drivers are installed and detected as working properly. I have rebooted also, with no luck. Ipconfig fails with the error "An Internal error occurred: The request is not supported."
View 8 Replies
ADVERTISEMENT
May 1, 2012
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies
View Related
May 19, 2011
I am getting "an error occurred while reconnecting...etc" when a previously successful drive mapping suddenly does not work. The short answer is to disconnect, then re-map the drives, but that is a real pain when you are accessing the same shares all day, and it seems to drop out whenever it feels like it.
View 1 Replies
View Related
Apr 21, 2011
why cant i sign in to my psn ?
View 5 Replies
View Related
Apr 28, 2011
i have a problem with the playstation 3 system when i sign in it takes a while todo that all of a sudden a error appeared on my screen saying "An error occured (80023121)" and me and my dad try to fix the problem but nothing seems to be working
View 1 Replies
View Related
Dec 25, 2012
I have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz.
View 1 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Feb 24, 2011
OS: Windows Vista Home Premium?Trying unsuccessfully so far to reconnect a client machine to a wireless network that it has been on for a year or so.ISP was down for about 2 hours the other day and when it came back up, the client machine started getting the IP address conflict. Went in to release and renew and got the following error messages:
on release: An error occurred while releasing interface Wireless Network Connection: An address has not yet been associated with the network endpoint.
on renew: The DHCP client has obtained an IP address that is use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
The next thing I tried was to go in an give a manual IP address to the Wireless Adapter. But the TCP/IP properties are greyed out and I receive the following error message:Some of the controls on this property sheet are already open. To use these controls, close all these property sheets and then reopen this one.
View 1 Replies
View Related
Jan 3, 2012
trying to export WCS data in order to migrate to the NCS but getting bellow error messages while following the Exporting WCS data doc:
D:Program FilesWCS7.0.172.0in>export D:wcs.zip
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
The procedure i am tring to follow:
To export WCS data, follow these steps:
#Step 1 Stop the WCS server.
#Step 2 Run the export command through the script file and provide the path and export file name when prompted.
#Step 3 For Linux, run export.sh all /data/wcs.zip. For Windows, run export.bat all datawcs.zip.
I do have enough available space, the WCS runs as VM
View 7 Replies
View Related
Apr 20, 2011
i'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies
View Related
Jul 28, 2012
I have been unable to access a frequently used website (by me) for well over a week. Every time I attempt access I get this error message:
"Error 400 Bad Request
Bad Request
XID: 865749824
O: web
GN: ch-sc-bb-shield1
The web server is responding too slowly to service your request. Please try again later."
PC clone, 4GB, Windows 7 64-bit. Is it possible that my 64-bit version is at fault? I have had some problems with it since I upgraded form the 32-bit version.
View 3 Replies
View Related
Feb 22, 2011
The error message "5405 RADIUS Request dropped", what does it mean ? We have implemented 802.1X on a C4506 switch running IOS 12.2(53), it has worked fine for about 3 months but now I get users not able to authenticate. In the loggs on the ACS I get the obove message.
ACS 5.2 is running 5.2.0.26 Build 3075.
View 6 Replies
View Related
Apr 11, 2012
Day before yesterday my Laptop [Dell Studio] has suddenly stopped working and i have to shut it down forcefully. Then i logged in again but my wireless was not working, i have googled the solutions and tried to start the WLAN Autocofig service but its throwing an error : 1053 : The service did not respond to the start or control request in a timely manner.I have Windows 7 installed on my system.Suddenly the speed of my laptop reduced drastically. Now its taking almost 12 mins to start instead of 2 mins.I have also removed some lines from the test files from the registry as mentioned in the below website as a resolution, but its not working.Unable to connect to wireless networks on Windows 7 Enterprise laptop. I dont have OS [Operating system's] CD as it was pre-installed on my laptop when i bought it.
View 2 Replies
View Related
Feb 21, 2011
We find ourselves in a difficult situation with the Cisco VPN Client version 5.0.07.0290 where it keeps giving us an
"Error 42: Unable to create certificate enrollment request"
When we attempt to use the Online enrollment method to create and enroll a new certificate. There is no additional information in the VPN client logs where we have set 3-High for all logs. In addition, Wire shark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
To create and enroll a certificate we do the following:
1. Click on the Enroll button to show the Certificate Enrollment dialog
2. Select Online
3. Select <New> for Certificate Authority
4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825)
5. Click Next to display the dialog where we can enter certificate details
6. Enter details in all fields except IP Address and Domain
7. Click Enroll which shows a dialog with the Error 42 ... message in it.
If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrollment request. The fact that the client does not send any messages to the Cisco CA leads us to believe that we have a problem on the client machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the client on a Windows 7 64bit machine and attempted the steps listed above.
View 2 Replies
View Related
Jan 27, 2013
We have purchased two new Nexus 3548 switches. According to documenation the Nexus 3K does support vPC. When trying to enable the feature I get this:
nexus(config)# feature vpc
Error: vPC feature is not supported
nexus(config)#
We are running software version version 5.0(3)A1(1) and it looks like the latest version is 5.0(3)A1(2) so that's not much of a difference.Am I missing something here?
View 4 Replies
View Related
Jul 20, 2012
my laptop sometimes gives a 500 internal server error when I try to go to any website. our other wireless devices such as our phones don't do this while the laptop is.
View 2 Replies
View Related
Oct 8, 2012
On ACS 4.2.0.124 version installed on Appliance 1113.We are getting error code as "Internal error" and also "Enabling Tacacs+ is not allowed for this Access Server" while client authentication.
View 5 Replies
View Related
May 10, 2012
A new Cisco 3750V2 (WS-C3750V2-48PS-S) running IOS 'c3750-ipbasek9-mz.122-50.SE5.bin' waspurchased to add to a stack of 3 Cisco 3750 (WS- C3750- 48PS-S) switches. The IOS on the stacked switches is 'c3750-ipbase-mz.122-25.SEB4.bin'.I loaded this IOS on to the new Cisco 3750V2 and deleted its original IOS. Boot up failed with error 'hardware not supported by firmware'. I am now trying to follow the recovery procedure but the I can only initialise the flash (flash_init) and there is no 'boot_helper' command to load the boot helper files. There is no option to rum 'copy xmodem' so I cannot upload the original IOS image via xmodem on hyperterminal.
View 7 Replies
View Related
Apr 4, 2013
Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies
View Related
Nov 30, 2011
I've just recently started to get this error, and I'm not sure why (I have no expierence with routers whatsoever). I have noticed, that whenever this happens though, that my NAT type for my xbox goes strict.
View 4 Replies
View Related
Oct 11, 2011
I have a problem with my router, WRT54G2. I was upgrading my firmware when my computer froze up, so I had to exit. Afterwards, I could not connect to the web based setup page anymore. I did a factory reset and installed it again with Network Magic and set up my wireless key. It is working now however, I cannot get into the web based setup page. Whenever i go to 192.168.1.1 and enter my info, it just says 500 Internal Server Error. I was always able to access this page, now I can't, so I assume it's not working because of the interrupted firmware update. I do alot of mac filtering and I limit the amount of IP addresses my router gives out so if anyone hacks my security key, they still won't be able to connect, so accessing my router setup page is important to me. I have reset (hold down reset button for 30 secs - 1 minute) the router many times and still nothing. I mean, the router still works. My brother and I can still connect with our laptops, I just can't get to the web based setup page.
View 7 Replies
View Related
Mar 4, 2012
Just bought first wireless router, when i insert CD and start setup, after a few seconds i get Error 301: internal error. i have rebooted and still no luck. I've tried going to 192.168.1.1, i got in one time but didn't understand half the stuff. now i can't go back into that page.
View 8 Replies
View Related
Oct 10, 2011
2 Nexus 5020 (SysObjId 3.719) brings internal error in inventory collection as following:"RICS0001: Internal Error, unable to process the collected data from the device".whereby 2 other devices from same type, same sysobjid are working well. SDT from v401 shows this device as supported.
View 10 Replies
View Related
Nov 12, 2012
NEXUS 7000 Octopus internal error in device 78 message. I got this on NEXUS 7000 logs:
Nov 12 22:05:14 smale-outside : 2012 Nov 12 21:05:14 BRST: %MODULE-2-MOD_DIAG_FAIL: Module 2 (serial: JAF1548AMKB) reported failure on ports 2/1-2/32 (Ethernet) due to Octopus internal error in device 78 (device error 0xc4e0025b)
Nov 12 22:05:17 smale-outside : 2012 Nov 12 21:05:17 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
Nov 12 22:05:18 smale-outside : 2012 Nov 12 21:05:18 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
[code]....
I only have found:
[URL]
which does not match reality : No one was configuring Vlans.
View 5 Replies
View Related
Jun 13, 2010
I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0 12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
View 4 Replies
View Related
Dec 3, 2011
This log message is produced Catalyst4507R+E.The device is inserted SUP-7 with 3.1.0SG Image.With this log message, the device produced duplication packet of multicast. Dec 2 16:40:00.276: (Suppressed 269 times)Dup Packet Fail for Sw Port
View 1 Replies
View Related
Sep 24, 2012
I have IP television at home. I've connected windows box between the tv receiver and modem by using two network cards and brdiging them together. Now, when the request from th tv box comes to the computer, I want to be able to intercept that request and send new request from computer to modem, but request for different ip. So tv box would think that it is playing the requested ip, but in fact it would play the other one.
View 6 Replies
View Related
Feb 1, 2011
Basically my friend has a game server with a particular IP. But lately I don't seem to be able to even 'see' that server. Pinging the IP gets a timeout. I did a tracert on the IP and from the first hop onwards it gives me 3 stars followed by a 'Request Timed Out' until the 30'th hop.
View 15 Replies
View Related
Jan 9, 2013
I first noticed it in games, and decided to ping my router in CMD. I see the occasional "request timed out", and not sure how to fix it.My other computers connected to the network are working fine, and I've tried USB Wireless adapters in my laptop which work fine, which implies the problem lies with the inbuilt adapter itself.I've tried reformatting, and updating drivers, but to no avail.I thought maybe the adapter might just be faulty, but then I decided to test it on Linux. I pinged the router in the terminal and... it seemed to work fine. I thought maybe some background process in Windows might be doing something to cause the problem, so I started in safe mode (with networking)... still the problem remained.
View 5 Replies
View Related
Mar 30, 2011
request for registration - wont submit - nothing happaens
View 1 Replies
View Related
Jul 10, 2011
I am facing strange behavior in Windows 7 and Windows Vista.I have a client program in my PC and server program outside network.I can see that some time TCP WINDOWS SCALING working and some time not.In first Log after 3 way handshakes established I can see data transfer happening bocs from log I can see it is settings SCALING factor.
But for some cases where I see that connection happened but data transfer not happening (May be my network does not work without Scaling..) I can see my WINSOWS TCP stack has not set SCALING in SYN request.Hence in 2 nd log I can see "Scale factor not supported"...though I enabled SCALING in my WINDOW .
You can see in 2nd log :: [ Win=8192 ( ) = 8192 ] - not settings scaling factor some time.How to fix this issue so that Windows 7 / Vista always set SCALING in SYN request.
My TCP Settings :::
Receive-Side Scaling State : enabled
Chimney Offload State : automatic
NetDMA State : enabled[code].....
View 1 Replies
View Related
May 22, 2012
We have a Terminal Server through which everyone access their outlook. To avoid any impact on its performance, we have disabled the IE in it. Everyone access the terminal server using the Remote desktop.For the above mentioned setup, is there any way to make the weblinks in the remote machine to get open in the main machine? Main Machine or the Local Machine runs with Windows 7 OS.
View 3 Replies
View Related
May 21, 2012
Request timeout on network connection
View 4 Replies
View Related
