Cisco Wireless :: WCS7.0.172.0 - Error Occurred During Data Export
Jan 3, 2012
trying to export WCS data in order to migrate to the NCS but getting bellow error messages while following the Exporting WCS data doc:
D:Program FilesWCS7.0.172.0in>export D:wcs.zip
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
The procedure i am tring to follow:
To export WCS data, follow these steps:
#Step 1 Stop the WCS server.
#Step 2 Run the export command through the script file and provide the path and export file name when prompted.
#Step 3 For Linux, run export.sh all /data/wcs.zip. For Windows, run export.bat all datawcs.zip.
I do have enough available space, the WCS runs as VM
View 7 Replies
ADVERTISEMENT
May 1, 2012
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies
View Related
Feb 24, 2011
OS: Windows Vista Home Premium?Trying unsuccessfully so far to reconnect a client machine to a wireless network that it has been on for a year or so.ISP was down for about 2 hours the other day and when it came back up, the client machine started getting the IP address conflict. Went in to release and renew and got the following error messages:
on release: An error occurred while releasing interface Wireless Network Connection: An address has not yet been associated with the network endpoint.
on renew: The DHCP client has obtained an IP address that is use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
The next thing I tried was to go in an give a manual IP address to the Wireless Adapter. But the TCP/IP properties are greyed out and I receive the following error message:Some of the controls on this property sheet are already open. To use these controls, close all these property sheets and then reopen this one.
View 1 Replies
View Related
May 19, 2011
I am getting "an error occurred while reconnecting...etc" when a previously successful drive mapping suddenly does not work. The short answer is to disconnect, then re-map the drives, but that is a real pain when you are accessing the same shares all day, and it seems to drop out whenever it feels like it.
View 1 Replies
View Related
Apr 21, 2011
why cant i sign in to my psn ?
View 5 Replies
View Related
Apr 18, 2013
I'm trying to migrate old data from WCS 7.0 to Prime 1.2 ... I have already created the zip file from WCS and imported it into the defaultRepo on Prime. I see it in the directory when I do a show repository defaultRepo so I have confirmed that it is there. My issue is that it appears Prime 1.2.1.012 won't accept the cli command of ncs migrate.
how I can proceed with the migration? I haven't been able to find any similar command in the Prime CLI so at this point I'm lost as to where I should go from here. I really don't want to have to tell the customer they have to downgrade to Prime 1.1 in order for them to perserve their maps especially since the Deployment Guide for Prime Infrastructure states that it is possible to migrate date from WCS 7.0 to Prime 1.2 as shown below ...
Data Migration
#
Data can be migrated from WCS 7.0, NCS 1.1, or LMS 4.x. More details on migrating data from each of these applications are spelled out in the following sections.
[Code].....
View 10 Replies
View Related
Oct 2, 2011
Got an problem with LMS 3.2/Solaris.
See no devices both in DCR and RME, besides, in RME device counters (Normal/Pending/etc) are equal to current device count, but then you try to select them for any operation, you unsucceed - 0 device selected, no list of devices, unable to export, no ability to do anything.
Upgraded to 3.2 SP1, no change. Spend a lot of time digging through logs at /usr/adm/CSCOpx/logs, find no problems at all. Seems, that some database parts were corrupted.
I decided to reinstall LMS from the scratch, but to do so I need to export the DCR device data and credentials.
Database is alive (dbaccess.pl install going smoothly, then connection with user lmsdatafeed works and allows to connect and select data from any SQL tool), but this view is not enough for getting from the DCR both device data and credentials.
I have the DB password I set up during installation.
Is there any way to get data I need connecting to LMS database directly with some kind of sysdba SQL database user?
View 3 Replies
View Related
Apr 28, 2011
i have a problem with the playstation 3 system when i sign in it takes a while todo that all of a sudden a error appeared on my screen saying "An error occured (80023121)" and me and my dad try to fix the problem but nothing seems to be working
View 1 Replies
View Related
Oct 12, 2011
I'm working on a Dell Vostro 220s running Windows XP with an integrated NIC. It had a few hundred viruses on it and after removing them, I can't get an internet connection. The icon says connected with 0 packets sent and 0 packets received. DHCP is enabled and other computers on the network can connect to the internet. The drivers are installed and detected as working properly. I have rebooted also, with no luck. Ipconfig fails with the error "An Internal error occurred: The request is not supported."
View 8 Replies
View Related
Dec 25, 2012
I have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz.
View 1 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Jan 26, 2012
When I attempt to export the certificate for the quickvpn client via the router web interface, it looks as if the export works, and it asks me to save the zip file. However, upon opening the zip file I receive the error: The compressed folder is invalid or corrupted.
This happens in multiple browsers, from multiple machines.
View 1 Replies
View Related
Jun 13, 2010
I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0 12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
View 4 Replies
View Related
Aug 8, 2011
I have a cisco router 2951 and this is the message that apear on the console:
ERROR: DDR controller 1 data training time out during initialization! Stop.
What does it mean?
View 3 Replies
View Related
Feb 25, 2013
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies
View Related
Dec 7, 2010
Recently I faced 1 issue in MLS 6509.MLS had all Gig modules in slots 6,7,8 taking System detected CRC error rate on port ASIC data bus exceed fatal threshold, ("System detected CRC error rate on port ASIC data bus exceed fatal threshold".) causing the module reset by the SUP. After this active SUP causing it to failover the standby. This process was continuing every few minutes resulting in the SUPs on MLS rolling.what could be the issue for Sup rolling reset?
View 1 Replies
View Related
Jul 25, 2012
How to export Air Quality reports from a 5508? I'm pretty sure I have read that we can not look back in time at the Air Quality report from the WLC, but can from NCS. If NCS was in the picture, can the Air Qaulity Report somehow be exported?
View 3 Replies
View Related
Jan 15, 2013
I've seen a discussion about importing mac addresses into the mac filter db on a cisco controller but is there a way to export the mac filter db? I have a Cisco 5508.
View 2 Replies
View Related
Dec 19, 2012
I've got a WLC5508 (7.0.116.0) that is managed by WCS (7.0.172.0). I set up another WLC5508 with the same code and managed by the same WCS. Now I'd like to export all the 800 guest user accounts with the passwords from the old WLC and import them into the new WLC.
View 10 Replies
View Related
Dec 3, 2011
This log message is produced Catalyst4507R+E.The device is inserted SUP-7 with 3.1.0SG Image.With this log message, the device produced duplication packet of multicast. Dec 2 16:40:00.276: (Suppressed 269 times)Dup Packet Fail for Sw Port
View 1 Replies
View Related
Apr 1, 2013
I installed a chained SSL cert on our anchor/guest 4402 a few years ago.We now have a need to replace the 4402 w/ a 5508, and I got everything configured, ready to go, except that darn cert.I can no longer locate the private key that was used to sign the original CSR.Is there any way to export the current cert from the 4402, so that I can import to the 5508? Or am I SOL?
View 3 Replies
View Related
Apr 14, 2013
I have done a WCS 7.0.220.0 to NCS migration prior to moving to Prime 1.2. I followed the instructions to export the WCS database via the export.bat all command and exported the database. However, when I import this zip fileto NCS there do not seem to be any of the original WCS templates. All the maps and AP details have migrated but no templates.
I have tried the export again and ploughed through the resultant zip file looking for anything that looks like template files but there is nothing immediately apparent that looks like templates.
View 6 Replies
View Related
Mar 14, 2011
I'm moving from a 5505 to a 5520 and moving to a different location. I have a certificate on the 5505 that I want to export to the 5520.Can I export that key/certificate and import to the new ASA? Is there a problem since its a different location with a different IP ? (Domain name is the same, I moved the name on the DNS also)Do a have to re-do the signing process with the CA ?
View 3 Replies
View Related
May 10, 2011
I am trying to export our network devices from ACS and I can't find out where it is exporting it. Under ACS 5.2 "Network ResourcesNetwork Devices and AAA Clients" you get the list of your network devices and at the bottom of the page there is an export button. When you click it you are given an option to password protect it which I didn't check the box and I pressed Start Export. The window flickers like it processed the request, but nothing happens. There isn't any pop-up to download the CSV. I have also tried setting up a software repo thinking it might just send it to that, but it didn't work either.
View 2 Replies
View Related
May 14, 2013
This feature is not working on our LMS installation. I have tried different browsers but is always giving the same error. It seems to be Java related.
View 0 Replies
View Related
Oct 12, 2012
cisco 2651XM router with WIC1 adsl card and NM-16ESW switch
IOS: c2600-ipbasek9-mz.124-23.bin
I use the following config to export traffic from the adsl card to a fasterthernet port so I can look at the adsl traffic in wireshark on a pc:router(config)#ip traffic-export profile my_rite router(conf-rite)#int FastEthernet 0/0 router(conf-rite)#bidirectional router(conf-rite)#mac-address abcd.efgh.ijkl (mac address of PC) router(conf-rite)#exit router(config)#int dialer0 router(config-if)#ip traffic-export apply my_rite this config works and I can see stuff going on in wireshark but it's only one way. This config only shows traffic going out from my adsl card, but no incoming. There is defintely traffic going both ways because everything about my adsl connection is working perfectly. I've tried using a different fastethernet port, even tried exporting to a different pc but all I see is outgoing ie: source is my public ip address but never as destination . I have bidirectional in the config but it still only shows outgoing. I even tried a different IOS (c2600-adventerprisek9-mz.124-15.T8.bin) but still it doesn't show incoming traffic. Could it be my ISP in some way hiding incoming traffic from view?
View 3 Replies
View Related
Mar 1, 2012
Creating several Inventory-Report Templates via Report Designer I was asking myself how to export/import these templates for use on other systems, performing backup.
View 1 Replies
View Related
Mar 7, 2012
I am using a Thrid party NetFlow tool, Enabled NetFlow on the Cisco 6500 as per recommendations and getting only half amout of traffic passing thorugh the interfaces. I have verified with 3 different NetFlow based tools, everything showing the same value. Is there any bug in my Cisco 6500.
View 2 Replies
View Related
Sep 19, 2012
I´m wondering if it`s possible to export the defualt web auth portal(web login page) via tftp to a computer from the Cisco WLC 5508 and then modify it and then import that customized portal to the WLC 5508?
View 6 Replies
View Related
Nov 29, 2011
I want to export the ACS local user's records.Then import to other ACS5.3 server.But the export file not the user's password record.I cannot import it well....
View 1 Replies
View Related
Oct 14, 2012
I have new ASA 5520 units currently we are using ASA 5510... I have to migrate all the configuration to the new ASA 5520 units....I am wondering is there a possible way to export and import certificates from ASA 5510 to 5520....
how to export or copy all the configurations, plug-ins, certificates from 5510 to 5520.Existing configuration snapshot...CA certificates from third party installed for authentication and identity certificate from Verisign
WebVPN
Anyconnect
Plug-ins
IPSEC tunnels
NAT
View 1 Replies
View Related
Apr 25, 2011
We are trying to sniff traffic in one of our routers 2811 IOS 12.4(3f) capturing data into the flash memory and tftp later to one of our servers. We had followed the command procedure as it is indicate in Router IP Traffic Export Packet Capture Enhancements doc but it seems that the mode capture option is not alllowed in my router. My question is Why? I had read the doc and the hardware and software should support this feature.
ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
yourname uptime is 2 weeks, 4 days, 22 hours, 14 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-ipbase-mz.124-3f.bin"
Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.Processor board ID FCZ104174196 FastEthernet interfacesDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.62720K bytes of ATA CompactFlash (Read/Write)
View 4 Replies
View Related
Jul 22, 2012
I have an ACS applicance that had a version 5.1 and i did an upgrade to 5.3 with latest patch.For some reason, the runtime process got stuck in (reinitializing and restarting) state.i did the recommended action to perform ACS stop and ACS start and even hard reset of the appliance, but it did not cut itThis process turned out to be a bug and it should have been fixed in version 5.3, but it has not i guess
i know that acs reset-config will solve the issue, but i have a problem here , the license file will be deleted as well with the config and i cannot find a way to export the license and then import it into the reseted config ACS hardware. Unfortunately, the license file is not saved anywhere in the company and i cannot affort to lose it.how to export the license from the applicance (CSACS-1120)?
View 3 Replies
View Related
