Cisco Firewall :: Error 305005 - No Translation Group Found?
Jun 26, 2011
Error message
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.16/53
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.166/53
[Code]....
I thought it needed a nat (c_dmz) command but I got the following error message
PIX(config)# nat (c_dmz) 0 0.0.0.0 0.0.0.0 0 0 nat 0 0.0.0.0 will be identity translated for outbound WARNING: Binding inside nat statement to outermost interface. WARNING: Keyword "outside" is probably missing.
View 2 Replies
ADVERTISEMENT
Dec 13, 2011
I have seen a few of these 305005 threads and they're usually related to NAT and resolved quickly. I have poked around a little, but can't seem to get it right. I'm using the Real-Time Log Viewer in my ASA 5510 and see lots of these 305005 errors between VPN clients and a server. Packet Tracer says it's being stopped at the PAT_POOL dynamic traslation to pool 1. I'm not solidly sure of what to change. [code]
View 9 Replies
View Related
May 31, 2011
I have a 5510 with just a inside and outside interface, everything works on the lan inc internet access and exchange hosting to the net, but I have another exchange server on the wan and I can't get to that because I'm not natting inbound traffic and the default route sends traffic elsewhere.
If I put a nat any statement on the inside interface inbound it works, however all LAN internet traffic fails with a No translation group found error.I've removed the static nat commands as they are all named anyway, but below is what I have before I do a nat any inside inbound command global (outside) 1 interfaceglobal (inside) 2 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0.
View 3 Replies
View Related
Mar 17, 2012
i wounder why i'm getting such log message whenever i'm trying to reach my remote site: No translation group found for tcp src outside XXXX dst dmz ZZZZ, i have a Cisco PIX515E firewall and that message is captured there, the traffic is going through a VPN tunnel (the VPN are up on both ends)
View 2 Replies
View Related
Jan 10, 2013
I have seen many of these errors lately. We have just moved to a new office and I have basically only assigned a new IP to the outside interface.
[code]....
View 6 Replies
View Related
Aug 1, 2010
My remote VPN clients aren't able to do anything network wise once they have connected to the VPN. The ASA keeps coming up with "no translation group found" in the log.
Result of the command: "show running"
: Saved:ASA Version 7.2(2) !hostname ciscoasadomain-name office.propertyfinder.comenable password ######## encryptednamesdns-guard!interface GigabitEthernet0/0 description Office Network Interface nameif Office-LAN security-level 100 ip address 10.121.10.4 255.255.255.0 ospf cost 10!interface GigabitEthernet0/1 description 4Mbps BTNet Internet Connection nameif Internet-Primary security-level 0 ip address 213.121.253.33 255.255.255.248 ospf cost 10!interface GigabitEthernet0/2 shutdown no nameif no security-level no ip address!interface GigabitEthernet0/3 description Office Wireless Interface nameif Office-Wireless security-level 10 ip address 172.16.0.1 255.255.255.0 ospf cost 10!interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 ospf cost 10 management-only!passwd 2KFQnbNIdI.2KYOU encryptedboot system disk0:/asa722-k8.binftp mode passivedns domain-lookup Office-LANdns server-group DefaultDNS name-server 10.121.10.20 name-server 10.121.10.21 domain-name
[code]....
View 13 Replies
View Related
Nov 1, 2011
I'm seeing plenty of these errors on my ASA5510. The ip's in question are IP's that my ASA is assigning VPN connection from my General IP pool.
Here are some examples:
<179>%ASA-3-305005: No translation group found for udp src External:172.16.50.112/29239 dst External:172.16.50.140/10009
<179>%ASA-3-305005: No translation group found for udp src External:172.16.50.113/20066 dst External:172.16.50.140/10009
<179>%ASA-3-305005: No translation group found for tcp src External:172.16.50.140/51228 dst External:172.16.50.111/29395
View 8 Replies
View Related
Apr 3, 2011
I have Cisco ASA5510 OS version 8.4(1), when i try to apply static command, this command is not found, the NAT issues used nat(inside,outside).
So why i can't found this command ?
View 1 Replies
View Related
Jun 17, 2010
I upgraded an ACS4.2 to ACS5.1, and in the ACS View Dashboard „ACS – System Errors” I see the following error message: [code] Unfortunately I can't find any documentation what describe what ERROR codes mean, so I don't know what does 32603 ERROR code mean.
View 11 Replies
View Related
May 23, 2012
For the past week I've had a problem browsing the internet. Now, at first, this only happened starting at around 3 am central time and ending at about 6 am when I could browse the internet properly. As the days went forth, however, it began happening earlier at around 12 am. What would happen is this: would be on the internet browsing sites and whatnot. All of a sudden (As I'm loading a new page) I would get the "Address not found" error as if I'm not connected to the internet. I could try to reload any other page on my session,but sometimes it would halfway load (ei:not loading pictures, ect.) and other times I would get Address not found. This would go for about a 4 hour time period. After that, everything would be back to normal and I could go back on my session.
Now, I'm on my laptop via a router that is in my house. We also have a desktop computer, but I noticed this problem happening on my laptop first. When it first happened, it was only on my laptop. I had internet connection and could browse it endlessly on my desktop. As the days went on, however, my desktop started having the same problem connecting to the internet (I still noticed the problem on my laptop first and then I would go see if the desktop had it too).When this first happened, I was thinking my laptop wasn't connecting to my router. Instinctively, I reset the router to no avail. I also opened up IE (I don't use it much because it's just too slow) and tried to diagnose the problem using that. When I did this, it was giving me DNS as the problem of me not connecting to the internet. I am not a network admin so I don't know that much about DNS. I also used IE to diagnose the problem on the following days, but after the first time it only gave me a "You aren't connected to the internet" solution. Since then, I've been running a barrage of anti virus, rootkit, ect. just because I can and I haven't done it in a long time. I didn't find anything unusual in all the reports so I'm still not sure what the problem is.
View 3 Replies
View Related
Feb 18, 2012
We are monitoring everyday C-2500 router, the CRC and input error are increasing day by day.This are current readings as observed on 18 Feb.
C-2500-R1#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
[Code].....
View 1 Replies
View Related
Nov 12, 2011
I am trying to install the WLAN driver for Dell Dimension 9200C desktop computer running Windows XP but I keep getting the error that no compatible hardware was found. I've gone to the appropriate Dell Drivers site for the computer's model and I'm 99% sure I downloaded the correct software for WLAN: Dell Wireless 1395 WLAN MiniCard. After going to Device Manager and looking under "Network Adapters", there is no Dell WLAN card at all (direct ethernet connection for internet works). Is it possible that the computer cannot find the WLAN network card, which prevents me from installing the driver software, even though it exists? If so, what can I do? If not, I guess I'll go buy a USB network adapter.
View 2 Replies
View Related
Feb 11, 2013
i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies
View Related
Jun 20, 2011
i have a SMC8014WG-SI Router and its gateway is 192.168.0.1 but when i type it in the router doesn't appear at all , just says that the page cannot be found. i like portforwarding and need to be able to login the router to do so.
View 9 Replies
View Related
Sep 10, 2012
even after installing t driver,i'm getting t same error message.Wifi adapter cannot be found
View 1 Replies
View Related
Mar 2, 2012
on IOS versions higher than 12.2(50) on Cisco 3560G-48TS I get this error/traceback, when I reach a certain number of Access-lists group'ed to "interface vlan", and the ACL inserted in the TCAM reaches acl label #128 (can be seen with : Show platform acl label 128)I can see errors in the TCAM if I issue the command
View 21 Replies
View Related
May 14, 2012
net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network
View 3 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Nov 3, 2011
I have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:
An error occurred while reconnecting F: to \SERVERData
Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.
View 6 Replies
View Related
Jun 22, 2012
I have been having this issue for the past one week where though i am able to connect to the internet through the wired lan without any problem when i connect it to my buffalo wzr - hp - ag300h router it disconnects within 5 minutes and on trying to check the internet connection DHCP server not detected error is shown. I have another edimax router and i tried to setup wireless with that router and have the same problem of disconnection after 5 minutes. [code]
View 14 Replies
View Related
May 9, 2012
I have a problem where occasionally a user will attempt to login and the LDAP search will find the user but then fail when it does the group search. The error I get is below
22037 Authentication Passed
22023 Proceed to attribute retrieval
24032 Sending request to secondary LDAP server
24016 Looking up user in LDAP Server - testuser
24004 User search finished successfully
24027 Groups search ended with an error
24034 Secondary server failover. Switching to primary server
24031 Sending request to primary LDAP server
24016 Looking up user in LDAP Server - testuser
24004 User search finished successfully
24027 Groups search ended with an error
22059 The advanced option that is configured for process failure is used.
22062 The 'Drop' advanced option is configured in case of a failed authentication request.
Some users never get this error, others will get it once in a while and I have one user that gets it every time they try and login.
View 3 Replies
View Related
Dec 14, 2011
I want to load balance between two webservers using ACE10 working in bridging mode, but when putting the VIP in the url i'm getting page not found, tried many configurations but didn't work, here is the latest one
logging enable
logging buffered 7
access-list ALL line 8 extended permit ip any any
[Code].....
View 4 Replies
View Related
Sep 4, 2011
I get the following error message at startup.
---
Error (2048) found in fsck check - attempt to repair.---
What is the implication of the error message 106007? Do I have no problem continuing to be left out of this error?
View 4 Replies
View Related
Feb 12, 2011
On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
View 1 Replies
View Related
Jun 13, 2012
I am trying to move a device from the Default location to a sub group and get the following message when I try (either with IE or Firefox)
This System Failure occurred: Index : 0, Size: 0. Your changes have not been saved. Click OK to return to the list page.
it also gives me the same error if I try and change the Device type from default to a sub group. I'm sure I could do this previously. The ACS build is (VMWARE install):
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.228ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: ACS1
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40Internal Build ID : B.839
I'm suspecting it a read/write issue with the database or a database corruption. I have stopped and started the application acs via the console and show application status acs has the following to say about itself.
ACS1/admin# show application status acs
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'view-database' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' runningProcess 'view-collector' runningProcess 'view-logprocessor' running
View 3 Replies
View Related
May 11, 2010
I've run in to this on 3750G's in a various sized stacks. We apply port security for a mac address on a single port (not existing on more than one port - that's a different issue that appears in multiple posts already).In this case:
1) We do a 'sho mac address-table and see that the device with the mac address in question lives on one port, port 1/0/x.
2) We apply mac port security for this exact same mac address to the same port it is already attached to. switch(config)#int g2/0/2 switch(config-if)#switchport port-security mac-address 001a.1ec8.abcd
3) Get this error: 'Found duplicate mac-address 001a.1ec8.abcd'.We again confirm that that is the only port on the entire switch that has this mac-address.Try the command again, same error.
4) We do a bunch of show commands, get in and out of the switch, go back and then try it again, and now it works, same command, same port and same mac address.
-Aging is default 300
-These are Cisco wireless AP's attached to the switch
-This occurs on different switches with different ports using different mac addresses, always same symptoms.
View 6 Replies
View Related
Jul 20, 2011
DHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.
View 1 Replies
View Related
Jan 19, 2011
I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.
View 1 Replies
View Related
Jun 20, 2011
Cannot turn off my windows firewalls on my vista toshiba after removing a scam Vista antivirus spyware download.. Cannot access any ports,Whenever I try to open a web browser, my disk defragmentation, ccleaner
View 1 Replies
View Related
Aug 24, 2012
I am going with ASA 5520, know how many NAT translation is possible.
View 2 Replies
View Related
May 30, 2011
I'm trying to migrate from olda PIX to newest ASA 8.4.1. Everything seems to be good except the static NAT. [code]
The inside interface uses implicit rule. ( permit any less secure network )
Although te above config the ASA logs the following.
TCP access denied by ACL from 94.94.94.94/2003 to outside:86.101.228.221/80
The 86.101.228.221 our public Internet IP whic are used as outside IP also.
View 8 Replies
View Related
Mar 1, 2012
I have some issues with Twin PAT on ASA (8.4.2), there is sth I dont udnerstand FTP server is on the inside and client is in outside.
I did sth like this
object network NATED-11
host 20.20.20.11
object network REAL-2
host 10.200.200.2
object service SRV-FTP
service tcp destination eq ftp
nat (outside,inside) source static any any destination static NATED-11 REAL-2 service SRV-FTP SRV-FTP so teoretically there should be a problem in NAT cause there is a second channel for data etc. BUT according to docs "For applications that require application inspection for secondary channels (for example, FTP and VoIP),the ASA automatically translates the secondary ports."
The problem is that it doesn't work at all and got the syslogs
Debug on ASA shows
ASA5510(config)# nat: untranslation - outside:20.20.20.11/21 to inside:10.200.200.2/21
nat: untranslation - outside:20.20.20.11/21 to inside:10.200.200.2/21
nat: untranslation - outside:20.20.20.11/21 to inside:10.200.200.2/21
nat: translation - outside:20.20.20.252/37924 failed - port is not found in xlate(0-0)
[code]....
To make it work I need to modify the nat rule to sth like this (translate source of client to inside inteface of ASA) nat (outside,inside) 1 source static any interface destination static NATED-11 REAL-2 service SRV-FTP SRV-FTP / why its not working in the first place? aaa I forgot to mention that both modes of FTP were tested (passive and active)
View 1 Replies
View Related
Dec 5, 2012
I have a server in a DMZ of my 8.4 ASA with nat:
object network FTP-SERVER
host 192.168.1.102
nat (dmz,outside) static interface tcp ftp ftp
And that's working well. However, I now need to translate the source address of connections from the outside to the FTP server as well. The aim is that the source address of packets when they reach the FTP server is an address on the DMZ subnet (as the default route for the FTP server now needs to be something else, not the ASA) as well as this outside-dmz NAT. I thought overloading the DMZ interface of the ASA? Or another IP in that range?
View 2 Replies
View Related
