Sharing :: Error Code - 0x80070035 Network Path Not Found

Feb 12, 2011

On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.

I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer

From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).

I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.

If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.

So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.

I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200v2 - Error Code 0x80070035 Network Path Not Found

Jun 15, 2012

I thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious.   I just installed the 4200v2 as a replacement for a NetGear.  I bought for the n performance and the USB for a shared disk/media file server.  I connected a640G Western Digital My Book to the USB.  I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message.  My computer is a 6 month old HP with Windows 7 running Bitdefender Internet.  I found I could get to the drive from my wife's  Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said).  After doing some Internet mining, I found that the issue is the Netbios setting in IPv4.  My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200.  Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center.  Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced.  Go to the Win tab and select Netbios enabled.

View 1 Replies View Related

Unable To Map Network Drivers Anymore (error Code 0x80070035)

Aug 11, 2011

Im having this problem at work where im trying to map my folders within our server, i used to be able to do so but as if out of nowhere i couldn't do so anymore, our network support said everything is fine with our server and the problem is probably something with my laptop.

Im using a laptop with windows 7 Home Premium 64bits

My network adapters are:

Intel Centrino Ultimate - N6300 AGN

Intel 82577LC Gigabit Network Connection

Im able to ping my server just fine, left only one of these microsoft 6to4 adapters, tried turning off my AVG and Firewall, sharing devices and printers is enabled, Netbios is enabled.

Oh, and my antivirus is AVG free.

ipconfig /all :
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

[Code].....

View 3 Replies View Related

Error Code 0x80070035?

Feb 21, 2013

Suddenly out of the blue, a I cannot acces my NAS anymore from my laptop. From any other computer in my network I can acces the NAS. My laptop has also no problem with the network in the office

View 4 Replies View Related

Sharing :: Windows 7 Says Network Path Was Not Found

Mar 23, 2011

I have always connected to other computers in my network, including my file server, and all of a sudden, it will not work. This is only happening on one computer. You can connect fine on all the others. I am running Windows 7 SP1, and in the network window, I can see the computers, but when I click on them to connect, it says "The network path was not found". If I access them via their IP in windows explorer, then I can access them . I have never seen this before. I attempted to disable Norton, I even un-installed it, and it still does the same thing.

View 1 Replies View Related

Error - Network Path Not Found

Feb 11, 2013

i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.

View 2 Replies View Related

Error Occurred While Connecting To Network Path Was Not Found

Sep 3, 2012

I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.

View 1 Replies View Related

Sharing :: Unable To Access Shared Files On Server - Network Path Not Found

Sep 20, 2011

Network error code 0x80070035 The network path was not found.

I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630

File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630

I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.

View 3 Replies View Related

Home Network Path Not Found

Dec 6, 2011

I have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP P

View 1 Replies View Related

Getting 0x80070035 Error When Using Wired Connection But Not With Wireless

Jan 10, 2012

I have two computers that both have wireless and ethernet cards. When they are btoh wirelessly connected to my router everything works fine. However, the speeds are horrendously slow. So I want to be able to connect the two of them with an ethernet chord.

I set it up so the computer with the better wireless, I'll call it PC2, is sharing its connection and I have the wireless on the other computer, PC1, turned off. I can freely access the internet on both computers with no problem.

This happens on both computers: I goto the Networking page and the other computer shows up. I double click it and I get the 0x80070035 error. Both computers can ping each other, but nether can ping the others host name. So I can ping 192.168.137.1, but not \PC2. No firewalls are running. If I turn the wireless on PC1 back on, it works again, but with the horrible low speed.

View 3 Replies View Related

Dell :: Vostro 460 Network Card Not Found Code 31 Need To Reboot 3 To 4 Times

Jan 15, 2012

I have 10 Vostro 460s, the network cards are not being found on startup.  You have to reboot the systems 3-4 times to get Windows to find the Network cards.  All drivers are up to date.  This may be related to a Windows update, since the machine were fine for a month or so until an Update came out.

View 95 Replies View Related

Network Error Code - 0x80070005

Nov 22, 2011

Above Error code was already mentioned in a thread from Nov. 2010, which is closed.URL: Network Error Code: 0x80070005 Tried same change in regedit, rebooted my Vista pc, but it gave no result overhere.Have network with 3 pc's(2x XP, 1x Vista); on drive E of a XP machine one map can be reached, another is unreachable, while getting the error code 0x80070005.

View 4 Replies View Related

Playstation Network Error Code 80023121?

Apr 27, 2011

can i do for fixer my playstation network accont

View 1 Replies View Related

Microsoft Windows Network Error - User Name Could Not Be Found?

Nov 3, 2011

I have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:

An error occurred while reconnecting F: to \SERVERData

Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.

View 6 Replies View Related

Sharing :: Files Looking For Old Server Path?

Dec 26, 2012

Recently I've changed my all local I.P. series in the server from 192.168..to 10.219..& the server 2008 providing through DHCP.So, I've to re mapped the share folder to change the path in every system.But few files in 1 PC are still keeps the old share folder path when trying to open & failing or taking long time! NOT all files in that machine

View 1 Replies View Related

Iomega 1Tb Home Network Drive Missing Share Drives - Error Code 0x80070043?

Mar 8, 2011

I have a 1Tb Iomega home media network drive. It normally connects via the network to all my machines (iMac osx, eee pc W7, ubuntu 10). But, something has happened, so now I can see the folders on the network drive but when I click on it (photos, videos etc), it says Windows cannot access \Iomega-0E10FDmovies

Error code: 0x80070043
The network name cannot be found

I have tried disabling the firewall in the router and the W7 eee pc, but nothing has worked.

View 1 Replies View Related

Servers :: Error Code - 500 Internal Server Error

Apr 20, 2011

i'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.

View 1 Replies View Related

Cisco VPN :: ASA 5505 To 5510 Error / Connection Denied Due To NAT Reverse Path Failure

Apr 28, 2011

Connection denied due to NAT reverse path failure

View 2 Replies View Related

Sharing :: CD Sharing Access Denied Error?

Sep 6, 2011

I have got the same problem but I have tried these steps and no go :(

View 1 Replies View Related

Cisco Wireless :: 4402 - Data Path Down Control Path Up

May 5, 2010

have just set up a WLC 4402 as a Guest WLAN controller on the DMZ of our network. I have successfully managed to get our internal controllers to connect to it, with the exception of 1. it says the control path is up but the data path is down. the other 14 controllers worked fine, and in testing the last one was OK but it is now not working properly. the 2 controllers can ping each other but just won't create the data tunnel. there is a firewall in the middle but that has been set up to allow traffic between the 2 groups of controllers to be unrestricted.
 
the internal controllers are 4404's and all controllers are running the same version of code. 5.1.151.0.

View 31 Replies View Related

Address Not Found Error For 3-4 Hrs / Day?

May 23, 2012

For the past week I've had a problem browsing the internet. Now, at first, this only happened starting at around 3 am central time and ending at about 6 am when I could browse the internet properly. As the days went forth, however, it began happening earlier at around 12 am. What would happen is this: would be on the internet browsing sites and whatnot. All of a sudden (As I'm loading a new page) I would get the "Address not found" error as if I'm not connected to the internet. I could try to reload any other page on my session,but sometimes it would halfway load (ei:not loading pictures, ect.) and other times I would get Address not found. This would go for about a 4 hour time period. After that, everything would be back to normal and I could go back on my session.

Now, I'm on my laptop via a router that is in my house. We also have a desktop computer, but I noticed this problem happening on my laptop first. When it first happened, it was only on my laptop. I had internet connection and could browse it endlessly on my desktop. As the days went on, however, my desktop started having the same problem connecting to the internet (I still noticed the problem on my laptop first and then I would go see if the desktop had it too).When this first happened, I was thinking my laptop wasn't connecting to my router. Instinctively, I reset the router to no avail. I also opened up IE (I don't use it much because it's just too slow) and tried to diagnose the problem using that. When I did this, it was giving me DNS as the problem of me not connecting to the internet. I am not a network admin so I don't know that much about DNS. I also used IE to diagnose the problem on the following days, but after the first time it only gave me a "You aren't connected to the internet" solution. Since then, I've been running a barrage of anti virus, rootkit, ect. just because I can and I haven't done it in a long time. I didn't find anything unusual in all the reports so I'm still not sure what the problem is.

View 3 Replies View Related

Psp Won't Allow Internet Access Due To DNS Error Code

Oct 4, 2011

For some odd reason, my playstation portable system will not allow me to access the wifi signal anywhere there is one available. The problem seems to be that the dns code is not correct. I need a COMPLETE & relatively EASY "walk-through" to fix this problem.

View 3 Replies View Related

Playstation 3 Error Code 80023121?

Apr 23, 2011

Whilst trying to sign into playstation network the error code 80023121 keeps popping up. This is preventing me from playing online

View 1 Replies View Related

Wifi Error Code 51100?

Dec 28, 2012

I just got a new router Netgear WGR614 v7 and i want to know how i get the WEP Key for my sons DSi xl so he can go online.

View 2 Replies View Related

Playstation Error Code 80023121

Apr 27, 2011

what is the problem with error code 80023121

View 1 Replies View Related

PSP Wireless Connection Error Code

Feb 6, 2011

How do i get connection name and ssid to be different keep getting error code80410205

View 2 Replies View Related

Keep Getting The Error That No Compatible Hardware Was Found?

Nov 12, 2011

I am trying to install the WLAN driver for Dell Dimension 9200C desktop computer running Windows XP but I keep getting the error that no compatible hardware was found. I've gone to the appropriate Dell Drivers site for the computer's model and I'm 99% sure I downloaded the correct software for WLAN: Dell Wireless 1395 WLAN MiniCard. After going to Device Manager and looking under "Network Adapters", there is no Dell WLAN card at all (direct ethernet connection for internet works). Is it possible that the computer cannot find the WLAN network card, which prevents me from installing the driver software, even though it exists? If so, what can I do? If not, I guess I'll go buy a USB network adapter.

View 2 Replies View Related

Broadband :: Error Code 8002ad36 And 80710723

Feb 3, 2013

I get kicked out of the game and have to log back in. I dont know why.Are there a phone number that i can call?

View 1 Replies View Related

Cannot Find Any Wireless Connection - Keep Getting Error Code 31?

Mar 2, 2012

my computers wireless is on and i can connect through an ethernet but my hp compac 6735s with vista os cannot find any available wireless networks not even my own one.I know the router is working as my other computer works wirelessly. I have updated drivers and i keep getting error code 31.

View 4 Replies View Related

Can't Turn On Firewall - Error Code 0x80070424

Feb 11, 2012

For some reason whenever I try to turn on my firewall I get the following error message:

Windows firewall can't change some of your settings Error Code 0x80070424

View 13 Replies View Related

Intel 82578DC EC - Could Not Be Started Error Code 10

Jan 16, 2011

I have a Intel DH55HC motherboard running windows 7 and the Intel 82578DC Ethernet controller is coming up with This device cannot start (code 10)I have loaded the prowin32 driver download from the Intel site and also re-done the BIOS as instructed and it still wont resolve.

View 1 Replies View Related

Generic Bluetooth Adapter Error Code 43

Sep 13, 2012

Generic bluetooth adapter error code 43

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Error Code Translation

Jun 17, 2010

I upgraded an ACS4.2 to ACS5.1, and in the ACS View Dashboard „ACS – System Errors” I see the following error message: [code] Unfortunately I can't find any documentation what describe what ERROR codes mean, so I don't know what does 32603 ERROR code mean.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved