I upgraded an ACS4.2 to ACS5.1, and in the ACS View Dashboard „ACS – System Errors” I see the following error message: [code] Unfortunately I can't find any documentation what describe what ERROR codes mean, so I don't know what does 32603 ERROR code mean.
View 11 Replies
I am trying to create a passcode for 1 IP Phone in a Network and have the following configuration in place as shown below: The plan is that when this IP Phone wants to dial out they will have to dial out the a 4 digit number 5798 followed by the number they want to dial out.The Router i am using is a CCME.
View 1 Replies View Relatedi'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies View RelatedError message
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.16/53
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.166/53
[Code]....
I thought it needed a nat (c_dmz) command but I got the following error message
PIX(config)# nat (c_dmz) 0 0.0.0.0 0.0.0.0 0 0 nat 0 0.0.0.0 will be identity translated for outbound WARNING: Binding inside nat statement to outermost interface. WARNING: Keyword "outside" is probably missing.
I have a 5510 with just a inside and outside interface, everything works on the lan inc internet access and exchange hosting to the net, but I have another exchange server on the wan and I can't get to that because I'm not natting inbound traffic and the default route sends traffic elsewhere.
If I put a nat any statement on the inside interface inbound it works, however all LAN internet traffic fails with a No translation group found error.I've removed the static nat commands as they are all named anyway, but below is what I have before I do a nat any inside inbound command global (outside) 1 interfaceglobal (inside) 2 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0.
Suddenly out of the blue, a I cannot acces my NAS anymore from my laptop. From any other computer in my network I can acces the NAS. My laptop has also no problem with the network in the office
View 4 Replies View RelatedAbove Error code was already mentioned in a thread from Nov. 2010, which is closed.URL: Network Error Code: 0x80070005 Tried same change in regedit, rebooted my Vista pc, but it gave no result overhere.Have network with 3 pc's(2x XP, 1x Vista); on drive E of a XP machine one map can be reached, another is unreachable, while getting the error code 0x80070005.
View 4 Replies View RelatedFor some odd reason, my playstation portable system will not allow me to access the wifi signal anywhere there is one available. The problem seems to be that the dns code is not correct. I need a COMPLETE & relatively EASY "walk-through" to fix this problem.
View 3 Replies View RelatedWhilst trying to sign into playstation network the error code 80023121 keeps popping up. This is preventing me from playing online
View 1 Replies View RelatedI just got a new router Netgear WGR614 v7 and i want to know how i get the WEP Key for my sons DSi xl so he can go online.
View 2 Replies View Relatedwhat is the problem with error code 80023121
View 1 Replies View RelatedHow do i get connection name and ssid to be different keep getting error code80410205
View 2 Replies View RelatedI get kicked out of the game and have to log back in. I dont know why.Are there a phone number that i can call?
View 1 Replies View Relatedmy computers wireless is on and i can connect through an ethernet but my hp compac 6735s with vista os cannot find any available wireless networks not even my own one.I know the router is working as my other computer works wirelessly. I have updated drivers and i keep getting error code 31.
View 4 Replies View RelatedFor some reason whenever I try to turn on my firewall I get the following error message:
Windows firewall can't change some of your settings Error Code 0x80070424
I have a Intel DH55HC motherboard running windows 7 and the Intel 82578DC Ethernet controller is coming up with This device cannot start (code 10)I have loaded the prowin32 driver download from the Intel site and also re-done the BIOS as instructed and it still wont resolve.
View 1 Replies View RelatedGeneric bluetooth adapter error code 43
View 2 Replies View Relatedcan i do for fixer my playstation network accont
View 1 Replies View RelatedWell I did something stupid (big surprise) and somehow managed to uninstall something related to the ethernet ports. I get code 28 and a yellow question mark with a little yellow circle with a black,Anyways what do I need to do to fix this, attached details from everest. It's probably something as simple as reinstalling the drivers, but buggered if I can figure out which ones I need.
View 1 Replies View RelatedI have a new Dell laptop inspiron runningwindows7,I get a error message when I try to access folders on network computer, a classroom network.
View 6 Replies View Relatedmy sony vaio will not connect to the internet. after trouble shooting it say that my intel wifi technology will not start. even i open the the program and try to enable it it still says error code 10 wont start.ive uninstalled and re installed and nothing is working, still can not connect to my network adapter.
View 4 Replies View RelatedI just bought this wireless router. I have 3 smartphones, kindle fire, 2 ipod touches and a laptop with win7 connected fine. But I have a laptop with vista that will connect local only with no internet. Went live chat with cisco and no result. I get the 82 code even after I try a quick key. It says "An HNAP call to the device failed because the HTTP connection was broken". I have resarted router and laptop. All other devices work fine and have no problem connecting on this router.
View 3 Replies View RelatedIm having this problem at work where im trying to map my folders within our server, i used to be able to do so but as if out of nowhere i couldn't do so anymore, our network support said everything is fine with our server and the problem is probably something with my laptop.
Im using a laptop with windows 7 Home Premium 64bits
My network adapters are:
Intel Centrino Ultimate - N6300 AGN
Intel 82577LC Gigabit Network Connection
Im able to ping my server just fine, left only one of these microsoft 6to4 adapters, tried turning off my AVG and Firewall, sharing devices and printers is enabled, Netbios is enabled.
Oh, and my antivirus is AVG free.
ipconfig /all :
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
OS/Antivirus/Firewall:
Windows 7 64 bit with latest Windows updates
Microsoft Security Essential with latest updates
Zonealarm Firewall Free with latest updates
Windows Firewall off and can't turn on, error code 0x80070724
Problem:Yesterday, I installed VMware Player and XP Mode to play a legacy game; also, some Automatic Windows Updates were applied.
After the Windows Update's all done, it prompted me to restart every 10 or 15 minutes, even after I chose Postpone 4 Hours every time. Probably one hour after, I closed VMware Player and restarted Windows.
Later, I found my Internet didn't work anymore.
Troubleshooting Attempts:I had already did the ip stack reset, removed VMware Player, restarted the wireless router, restarted WiFi, reenable WiFi adapter, reinstalled Wireless driver with latest driver, System Restore to the day before (System Restore said it didn't work, but Windows reboot said it has been restored), disabled the Internet sharing (I didn't turn it on, I guess some program like VMware did it), removed Stored Wireless Network Profiles and added later.Windows 7's network troubleshooting found no problem.
Current Situation:The home wireless network is working properly for sure, because both my phone and others' laptops connect to the same WiFi and work properly.I installed Ubuntu 12 on this same laptop and connected to same WiFi to go online.WiFi is shown to be connected and working. I can ping and connect to the wireless router (192.168.2.1), but unable to go to any website.
---------------------------------
C:Usersanluo>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MyPC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
I am treating to install a router e 1000 when I run the CD setup a get an error code 82bd0305
View 7 Replies View RelatedI am installing the router but keep getting stuck on the 4th step and getting an error code 321. i currently have cable internet, which is working but when i follow the instructions it wont work. I cant access 192.168.1.1. I tried through google chrome and internet explorer but neither will recognize it. I just started school and would like to use wireless internet on my new laptop instead of cable on my desktop.
View 9 Replies View RelatedI have the tunnel set up, but when I try to renew and release it pops up with this error.
View 9 Replies View Related"The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?
View 7 Replies View RelatedI have two ACS v 5.2 (primary and secundary) and some users are in the internal stor and the others are in the AD.The local site topology is like this:
PC - AP - WLC - ACS - AD
Authentication method is PEAP(EAP-MSCHAPv2) and all user have the certificate company installed. The OS in the client users is Windows 7.Users was working fine but some users reports intranet disconnections. I see in the ACS log many "22056 Subject not found in the applicable identity store(s)." and "24415 User authentication against Active Directory failed since user's account is locked out" alarms.I believed it was because user wasn´t in the AD data base, but some times the same user is authenticated successfull and other i see the "22056...." or "24415...." alarms.
I switched the role for ACS primary to works as secundary and we see the same alarms.
I got this error this operation returned because the timeout period expired error code 0x000005b4
View 1 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 120926
ISP : ADSL24
Just bought new router TD-W8968 and tried to do a firmware upgrade to latest version but keep getting Error code: 4503
Have even tried an older version thinking maybe I had to do that one first but got same error code.
We are seeing daily erros on our ACS5.4 server like below:
View 1 Replies View Related
