Cisco Firewall :: 5510 No Translation Group Found Error
May 31, 2011
I have a 5510 with just a inside and outside interface, everything works on the lan inc internet access and exchange hosting to the net, but I have another exchange server on the wan and I can't get to that because I'm not natting inbound traffic and the default route sends traffic elsewhere.
If I put a nat any statement on the inside interface inbound it works, however all LAN internet traffic fails with a No translation group found error.I've removed the static nat commands as they are all named anyway, but below is what I have before I do a nat any inside inbound command global (outside) 1 interfaceglobal (inside) 2 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0.
View 3 Replies
ADVERTISEMENT
Jun 26, 2011
Error message
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.16/53
305005: No translation group found for udp src c_dmz:10.0.176.120/51910 dst inside:195.244.192.166/53
[Code]....
I thought it needed a nat (c_dmz) command but I got the following error message
PIX(config)# nat (c_dmz) 0 0.0.0.0 0.0.0.0 0 0 nat 0 0.0.0.0 will be identity translated for outbound WARNING: Binding inside nat statement to outermost interface. WARNING: Keyword "outside" is probably missing.
View 2 Replies
View Related
Jan 10, 2013
I have seen many of these errors lately. We have just moved to a new office and I have basically only assigned a new IP to the outside interface.
[code]....
View 6 Replies
View Related
Dec 13, 2011
I have seen a few of these 305005 threads and they're usually related to NAT and resolved quickly. I have poked around a little, but can't seem to get it right. I'm using the Real-Time Log Viewer in my ASA 5510 and see lots of these 305005 errors between VPN clients and a server. Packet Tracer says it's being stopped at the PAT_POOL dynamic traslation to pool 1. I'm not solidly sure of what to change. [code]
View 9 Replies
View Related
Mar 17, 2012
i wounder why i'm getting such log message whenever i'm trying to reach my remote site: No translation group found for tcp src outside XXXX dst dmz ZZZZ, i have a Cisco PIX515E firewall and that message is captured there, the traffic is going through a VPN tunnel (the VPN are up on both ends)
View 2 Replies
View Related
Aug 1, 2010
My remote VPN clients aren't able to do anything network wise once they have connected to the VPN. The ASA keeps coming up with "no translation group found" in the log.
Result of the command: "show running"
: Saved:ASA Version 7.2(2) !hostname ciscoasadomain-name office.propertyfinder.comenable password ######## encryptednamesdns-guard!interface GigabitEthernet0/0 description Office Network Interface nameif Office-LAN security-level 100 ip address 10.121.10.4 255.255.255.0 ospf cost 10!interface GigabitEthernet0/1 description 4Mbps BTNet Internet Connection nameif Internet-Primary security-level 0 ip address 213.121.253.33 255.255.255.248 ospf cost 10!interface GigabitEthernet0/2 shutdown no nameif no security-level no ip address!interface GigabitEthernet0/3 description Office Wireless Interface nameif Office-Wireless security-level 10 ip address 172.16.0.1 255.255.255.0 ospf cost 10!interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 ospf cost 10 management-only!passwd 2KFQnbNIdI.2KYOU encryptedboot system disk0:/asa722-k8.binftp mode passivedns domain-lookup Office-LANdns server-group DefaultDNS name-server 10.121.10.20 name-server 10.121.10.21 domain-name
[code]....
View 13 Replies
View Related
Nov 1, 2011
I'm seeing plenty of these errors on my ASA5510. The ip's in question are IP's that my ASA is assigning VPN connection from my General IP pool.
Here are some examples:
<179>%ASA-3-305005: No translation group found for udp src External:172.16.50.112/29239 dst External:172.16.50.140/10009
<179>%ASA-3-305005: No translation group found for udp src External:172.16.50.113/20066 dst External:172.16.50.140/10009
<179>%ASA-3-305005: No translation group found for tcp src External:172.16.50.140/51228 dst External:172.16.50.111/29395
View 8 Replies
View Related
Mar 10, 2012
Trying to translate telnet for switches to the outside ip address at some random ports.
172.16.200.2:23 -> 10.199.199.2:2300
172.16.200.3:23 -> 10.199.199.2:2301
172.16.200.4:23 -> 10.199.199.2:2302
etc....
ASA 5510 running 8.4(3):
interface Ethernet0/0
nameif outside
security-level 0
ip address 10.199.199.2 255.255.255.248
interface Ethernet0/1.200
vlan 200
nameif inside
security-level 100
ip address 172.16.200.254 255.255.255.0
[code]....
I can not access the switch at 10.199.199.2:2301 . What am I doing wrong? Or should cleaning toilets be something I really should look at! Now if i run this NAT statment:
object network Switch_TN
nat (inside,outside) static 10.199.199.3 service tcp telnet 2301
I am able to access the switch at 10.199.199.3:2301
View 7 Replies
View Related
Jun 1, 2011
I have ASA 5510 and public FTP server from my local network to external IP address, with static nat translation. All works, but I need request to ftp come from internal ASA interface (need use gateway different ASA). How configured ASA for forwarding request?
View 4 Replies
View Related
Dec 4, 2012
I am having an issue with a specific server that is not reachable from other sub nets. Every other device on the same sub net as the server is reachable via the other sub nets. This server is special because it's NAT'd to an external IP address and has several site-to-site VPN's set up. The firewall is a Cisco ASA 5510.
This is the error I see on the ASA syslog when I try to ping the server from another sub net: 3 Dec 05 2012 10:58:49 10.0.15.101 regular translation creation failed for icmp src inside:10.0.20.8 dst inside:10.0.15.101 (type 0, code 0)
The problem server is on sub net 10.0.20.0/24 and the server IP address is 10.0.20.8. Every device on the 10.0.20.0/24 sub net can hit the server, but devices on other sub nets cannot. For instance, a device on 10.0.15.0/24 cannot reach 10.0.20.8, but can reach other devices on 10.0.20.0/24.
View 1 Replies
View Related
Jan 19, 2013
Is it possible to perform static Nat's through an internal network?I have a ASA 5510 with a public outside interface (let’s call it 68.68.68.1), and I have an inside private IP address (192.168.1.2/24). The inside IP address leads to a 4900m with that interface being configured with a 192.168.1.1 (no switching). On the 4900 M I have several VLANs one of them is an internal DMZ of sorts. (192.168.2.0/24). Within this DMZ network are several Web servers which need to be associated a public IP address (68.68.68.x).
Every time I configure a static Nat to associating a public IP address with an internal IP address within the DMZ, packet Tracer on the ASA informs me that the packet gets dropped at the static Nat and I cannot figure out why this is so.Safe it to say my question still stands is it possible to Nat (68.68.68.222 to and 92.168.2.60) given the configuration above, and how would I go about configuring in such the manner above so that I acn apply static nat through the 192.168.1.0 network to reach the 192.168.2.0 network.
View 11 Replies
View Related
Apr 3, 2011
I have Cisco ASA5510 OS version 8.4(1), when i try to apply static command, this command is not found, the NAT issues used nat(inside,outside).
So why i can't found this command ?
View 1 Replies
View Related
Jan 18, 2012
I have a cisco ASA 5510 runing IOS version 7.2(5).I am using asdm-647.bin file for accessing asdm. But when i do https:\<ASAIP> , it takes me to user authentication. on entering the username password it gives me the below error.The page cannot be found The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following:If you typed the page address in the Address bar, make sure that it is spelled correctly.Open the 172.16.5.3 home page, and then look for links to the information you want. Click the Back button to try another link. Click Search to look for information on the Internet. HTTP 404 - File not foundInternet Explorer not sure what the issue is. I am accessing it from the inside network. I have enabled http server and also gave inside network http access.
View 1 Replies
View Related
Apr 5, 2011
I can not have "dns server-group" on my asa 5510, could you tell me how to get this command in my ASA 5510.
View 3 Replies
View Related
Apr 8, 2011
can i have on asa 5510 multiple pools and multiple group authentication for various departments along with restricted access if any
View 3 Replies
View Related
Oct 29, 2012
We have Cisco ASA 5510, I am about to add another 2 Objectgroup network groups on the firewall to our already growing list. Under this Object-group Network xxxx , we are planning to add about about 500 network-object host xxx.xxx.xxx.xxx . This objectgroup will then be applied to an ACL. Just wanted to know if thats possible - meaning addnig 500 hosts? If it is whats the limit?
Also are there any other things to keep in mind before i go-ahead with this huge object group?
View 3 Replies
View Related
Apr 19, 2010
I'm actually require authentication for users who are coming from the PublicVLAN (the vlan associated with the wireless hotspot) to authenticate themself to the LDAP server via my firewall ASA 5510
View 12 Replies
View Related
Jun 17, 2010
I upgraded an ACS4.2 to ACS5.1, and in the ACS View Dashboard „ACS – System Errors” I see the following error message: [code] Unfortunately I can't find any documentation what describe what ERROR codes mean, so I don't know what does 32603 ERROR code mean.
View 11 Replies
View Related
Aug 21, 2012
I recently bought an all brand new ASA 5510 and it is here by my side. I'm trying to configure it but when entering https://192.168.1.1/admin I get Page Not Found error on IE. I'm able to ping 192.168.1.1 and have success telnet 443 port.
View 13 Replies
View Related
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
Mar 5, 2013
I am trying to add 89,462+ access list rules to an ASA 5510 running 8.2(5). I have added all the rules to an object group and when I try to apply the access list to an interface it gives me the following error:
ERROR: Cannot add policy to rule engine ERROR: Unable to assign access-list wan-out to interface wan
I have not tried not using an object group and just putting the rules in the access list. I want to be able to add to these rules if needed easily.
I think it's clear that i have exceeded the rule limit for the ASA. So my question is, what is the rule limit for an ASA 5510 and which ASA could I purchase that would handle this amount of rules?
View 1 Replies
View Related
Feb 4, 2012
I have turned on the aaa command authorization without applying adequate privileges to the user. I can now log in through that user but the ASA 5510 displays an error :ASA 5510# show running-config
ERROR: % Invalid input detected at '^' marker.
ERROR: Command authorization failed.
I am unable to make any configuration changes on the firewall. Is there any default user through which I can log in and disable the aaa authorization ? if not, how can I resolve this situation ?
View 1 Replies
View Related
May 23, 2012
For the past week I've had a problem browsing the internet. Now, at first, this only happened starting at around 3 am central time and ending at about 6 am when I could browse the internet properly. As the days went forth, however, it began happening earlier at around 12 am. What would happen is this: would be on the internet browsing sites and whatnot. All of a sudden (As I'm loading a new page) I would get the "Address not found" error as if I'm not connected to the internet. I could try to reload any other page on my session,but sometimes it would halfway load (ei:not loading pictures, ect.) and other times I would get Address not found. This would go for about a 4 hour time period. After that, everything would be back to normal and I could go back on my session.
Now, I'm on my laptop via a router that is in my house. We also have a desktop computer, but I noticed this problem happening on my laptop first. When it first happened, it was only on my laptop. I had internet connection and could browse it endlessly on my desktop. As the days went on, however, my desktop started having the same problem connecting to the internet (I still noticed the problem on my laptop first and then I would go see if the desktop had it too).When this first happened, I was thinking my laptop wasn't connecting to my router. Instinctively, I reset the router to no avail. I also opened up IE (I don't use it much because it's just too slow) and tried to diagnose the problem using that. When I did this, it was giving me DNS as the problem of me not connecting to the internet. I am not a network admin so I don't know that much about DNS. I also used IE to diagnose the problem on the following days, but after the first time it only gave me a "You aren't connected to the internet" solution. Since then, I've been running a barrage of anti virus, rootkit, ect. just because I can and I haven't done it in a long time. I didn't find anything unusual in all the reports so I'm still not sure what the problem is.
View 3 Replies
View Related
Feb 18, 2012
We are monitoring everyday C-2500 router, the CRC and input error are increasing day by day.This are current readings as observed on 18 Feb.
C-2500-R1#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
[Code].....
View 1 Replies
View Related
Nov 12, 2011
I am trying to install the WLAN driver for Dell Dimension 9200C desktop computer running Windows XP but I keep getting the error that no compatible hardware was found. I've gone to the appropriate Dell Drivers site for the computer's model and I'm 99% sure I downloaded the correct software for WLAN: Dell Wireless 1395 WLAN MiniCard. After going to Device Manager and looking under "Network Adapters", there is no Dell WLAN card at all (direct ethernet connection for internet works). Is it possible that the computer cannot find the WLAN network card, which prevents me from installing the driver software, even though it exists? If so, what can I do? If not, I guess I'll go buy a USB network adapter.
View 2 Replies
View Related
Feb 11, 2013
i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies
View Related
Jun 20, 2011
i have a SMC8014WG-SI Router and its gateway is 192.168.0.1 but when i type it in the router doesn't appear at all , just says that the page cannot be found. i like portforwarding and need to be able to login the router to do so.
View 9 Replies
View Related
Sep 10, 2012
even after installing t driver,i'm getting t same error message.Wifi adapter cannot be found
View 1 Replies
View Related
Mar 2, 2012
on IOS versions higher than 12.2(50) on Cisco 3560G-48TS I get this error/traceback, when I reach a certain number of Access-lists group'ed to "interface vlan", and the ACL inserted in the TCAM reaches acl label #128 (can be seen with : Show platform acl label 128)I can see errors in the TCAM if I issue the command
View 21 Replies
View Related
May 14, 2012
net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network
View 3 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Nov 3, 2011
I have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:
An error occurred while reconnecting F: to \SERVERData
Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.
View 6 Replies
View Related
Jun 22, 2012
I have been having this issue for the past one week where though i am able to connect to the internet through the wired lan without any problem when i connect it to my buffalo wzr - hp - ag300h router it disconnects within 5 minutes and on trying to check the internet connection DHCP server not detected error is shown. I have another edimax router and i tried to setup wireless with that router and have the same problem of disconnection after 5 minutes. [code]
View 14 Replies
View Related
