Home Network Path Not Found
Dec 6, 2011
I have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP P
View 1 Replies
ADVERTISEMENT
Feb 11, 2013
i have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies
View Related
Mar 23, 2011
I have always connected to other computers in my network, including my file server, and all of a sudden, it will not work. This is only happening on one computer. You can connect fine on all the others. I am running Windows 7 SP1, and in the network window, I can see the computers, but when I click on them to connect, it says "The network path was not found". If I access them via their IP in windows explorer, then I can access them . I have never seen this before. I attempted to disable Norton, I even un-installed it, and it still does the same thing.
View 1 Replies
View Related
Sep 3, 2012
I am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies
View Related
Feb 12, 2011
On my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
View 1 Replies
View Related
Sep 20, 2011
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
View 3 Replies
View Related
Jun 15, 2012
I thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious. I just installed the 4200v2 as a replacement for a NetGear. I bought for the n performance and the USB for a shared disk/media file server. I connected a640G Western Digital My Book to the USB. I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message. My computer is a 6 month old HP with Windows 7 running Bitdefender Internet. I found I could get to the drive from my wife's Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said). After doing some Internet mining, I found that the issue is the Netbios setting in IPv4. My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200. Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center. Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced. Go to the Win tab and select Netbios enabled.
View 1 Replies
View Related
Mar 5, 2011
I run a home private server on Centos 5.5 I believe. A while ago, a surge destroyed a different computer with pictures on it that my parents would like to access. The hard drive itself is just fine, and I've backed up those files on an external hard drive. What I would like to do is allow my parents to access them through Samba. Samba has already been in long time use, but it is configured to only allow access in a jail inside each user's home folder on the root hard drive. I have a suitable hard drive already formatted and mounted that can fit all the pictures that they wish to have access too. What I'd like to do, is change the path that one of my users use to the mounted hard drive.
View 3 Replies
View Related
May 5, 2010
have just set up a WLC 4402 as a Guest WLAN controller on the DMZ of our network. I have successfully managed to get our internal controllers to connect to it, with the exception of 1. it says the control path is up but the data path is down. the other 14 controllers worked fine, and in testing the last one was OK but it is now not working properly. the 2 controllers can ping each other but just won't create the data tunnel. there is a firewall in the middle but that has been set up to allow traffic between the 2 groups of controllers to be unrestricted.
the internal controllers are 4404's and all controllers are running the same version of code. 5.1.151.0.
View 31 Replies
View Related
Apr 13, 2011
My system problem is after starting the computer within 5minits network services are disabled and network path not connected but communication is working when i am testing the ping command.
View 1 Replies
View Related
Sep 9, 2011
I have a wireless network of PC, Acer Extensa laptop (laptop1), and Acer Aspire notebook (laptop2) which connect wirelessly to a Livebox. All machines are running XP (SP3). Laptop2 connects to the Livebox via a Broadcom 802.11g adapter.There is no problem with any of these accessing the internet. Until recently (not sure how long ago) there was no problem with any of them accessing each other.Yesterday we discovered that laptop2 has lost contact with PC. All other connections are fine (including PC to laptop2). I have checked evrything I can think of and have carried out a System Restore taking the machine back as far as I can but that has made no differenceLaptop2 appears to recognise the workgroup in its 'preferred networks' box but the PC does not appear in its list of computers on the network and any attempt to access the network (My Network Places>Entire Network>Microsoft Windows Network & click on MSHOME) results in "you do not have permission ..." then followed by "Windows cannot find the network path.."
View 2 Replies
View Related
Apr 3, 2012
I'm studying for a Cisco certification and I'm trying to wrap my head around the routing. I understand how routers work for the most part and how the get updates about networks and how many hops away they are, but I don't get what happens when a router doesn't know the path to a network.
View 19 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Jul 11, 2011
it says no network found. It worked fine but not now.
View 1 Replies
View Related
Oct 20, 2011
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies
View Related
Nov 10, 2011
How to install a wireless network in home environment?
View 6 Replies
View Related
Jan 14, 2012
I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies
View Related
Sep 10, 2011
I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies
View Related
May 12, 2011
I ran an error fix on AVG and the AVG one time tune up and not my HP Mini cannot connect to the internet. WLAN is on. It says "No wireless networks were found in range"...when it was just connected before I ran AVG program and has been for monthsWhen I try auto repair it does not find network. When I open Network Connections it says Wireless network Connection 2 Not connected, Firewalled Broadcom 802.11b/g WLAN
View 13 Replies
View Related
Mar 19, 2011
I just downgraded from vista to XP on my Compaq pc that a friend gave to me. The hard drives were loaded with junk so i decided to do a fresh install with my Windows XP cd. Everything looks like its working great except it seems as if ive lost all drivers necessary to connect to the internet. Pretty much the computer can't even tell that theres a network adapter installed.
View 10 Replies
View Related
Oct 30, 2011
I'm still having problems (as seen in 'Network Controller Not Found (Clueless!)) and have a quick query.I'm trying to locate a specific driver and so far have exhausted my search, can I get anything from the Hardware Id from the Unknown Network Controller?
View 3 Replies
View Related
Jul 18, 2012
My desktop cannot go online suddenly and I reformat my desktop with Windows 7. There's nothing under the network adapter section. My house has wifi router and other laptops can connect to the wifi but my desktop (connect to the modem using cable), cannot.When I tried to run the troubleshoot, it says, it cannot find the network adapter and I have no idea which adapter I'm using.
View 1 Replies
View Related
Sep 25, 2011
i jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?
View 1 Replies
View Related
Oct 29, 2011
I've got a Philips MT1800, Intel Core 2 Duo package. My network adapters are recognised (1394 Net Adapter, Intel Pro/1000 PM Network Connection), but in unknown Devices the 'Network Controller' drivers are not found (there was a Ralink RT2500 slot before, I'm assuming this is the missing driver??). EVEREST Home Edition recognises a Ralink RT2500 802.11g Wireless Network Adapter (PCI), and my PC finds new hardware on reboot, but it cannot find drivers at all. I've tried a few methods, such as Driver Detective etc. but don't have the original restore CD any more, so don't want to tamper with any other "out of date" drivers. I am not in a situation where I can order a restore CD, so I'm hesitant to System Restore in case something else becomes unresolvable.
View 11 Replies
View Related
Nov 28, 2011
i have a laptop running Vista which will connect to wireless network, but will not connect to internet. I have tried connecting direct to router and also deleting wireless connection & reinstalling with no luck. I can however use a mobile broadband usb dongle and connect to the internet with no problem - appears to be a problem with connecting via something other than mobile broadband?
View 1 Replies
View Related
Sep 18, 2011
All of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies
View Related
Apr 23, 2013
Everything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies
View Related
Oct 20, 2012
My computer started shutting off and not turning on. I had installed new parts a while ago and so I switched the new parts with the old ones (power supply and Graphics card) and it worked again. But i couldnt connect to the internet and i did a diagnoses and it said adapter not found or correctly installed or something like that. I couldnt find the adapter either. I was going to download the network adapter driver from the dell website on to a thumb drive and install in onto my desktop but i do not know which one to download.
View 1 Replies
View Related
Dec 29, 2012
I have just installed a Intel Pro wireless card into a HP Compaq nc6120 laptop, downloaded the basic drivers from HP's website but I get "no networks found in range".I've followed this thread: [SOLVED] Laptop Can't Find Wireless NetworkThe laptop was previously using a Sweex USB plugin adaptor and this had been working fine for years. I just fancied getting an internal card for this laptop - but cant seem to get it so work.
View 12 Replies
View Related
Jan 28, 2011
Recently, nearly every time I start up my computer, I can't connect to the internet. I have internet, as says my modem, what I don't have is an internet adapter. I've checked the device manager, and network and sharing center, and it just doesn't exist. I restart a few times and by chance it finds the adapter and I can connect. I have no idea what's going on, as Googling has not worked much at all.[CODE]
View -1 Replies
View Related
Dec 13, 2011
I found two unknown computers on my network (using Explorer). I have a wireless setup at home (private) with a desktop (wired), two laptops and a phone (wireless).The encryption is WPA2/TKP with a hard to guess password. The two unknown computers were connected this morning and a few minutes after I tried to access them and do some checks,they disappeared could they have been watching me? I didn't check the router page until then and of course, they weren't there.Also, yesterday I was at a coffee place, so could it be that this is nothing and those two computers are from people at the cafe? Is there anything I can do to make sure nobody can access my network, unless it's the computers I want. I haven't manually set up a home network yet. [code]
View 4 Replies
View Related
Nov 21, 2011
I know the network works because my work computer connects wirelessly.When I load the Intel My Wifi Utility it says Network adapter not found.What happened? I didn't do anything different or special...it just stopped working one day.I am running Win 7 64 bit. Toshiba Satellite Laptop.
View 19 Replies
View Related
Dec 16, 2011
I have a DELL Latitude 630 running Windows Vista. I checked into a hotel and just cannot find the wifi network on this laptop..IT is a named network and yet all i see is an unnamed network on my list of networks found. My blackberry device can easily locate the network..but the laptop simply refuses. I have tried restarting, playing around with the advanced propoerties of the wifi adapter but all in vain. I can use the office wifi ont he same laptop without any issue..but not in my hotel.
View 2 Replies
View Related
