i have a laptop running Vista which will connect to wireless network, but will not connect to internet. I have tried connecting direct to router and also deleting wireless connection & reinstalling with no luck. I can however use a mobile broadband usb dongle and connect to the internet with no problem - appears to be a problem with connecting via something other than mobile broadband?
View 1 RepliesMy Dell XPS (Windows XP) is not connecting to my network..can't get anything to show up on the networks in range list. My other laptop is fine. But I just upgraded to Firefox 4 on the Dell, and then the connectivity went askew.
View 2 Replies View RelatedI am running a Windows 7 Professional 32 bit as my office computer. About 3 PCs in the office are connected to the office server through wireless connection (including mine), and another 3 are connected through a wired connection. My connection to the server doesn't work at times. I get an error message that "An error occurred while connecting to . The network path was not found." The other PCs using the network have no problem connecting to the server. Also, the internet connection is shared from the server and I have no trouble with it. The problem is only with accessing the shared folder on the server.
View 1 Replies View RelatedI ran an error fix on AVG and the AVG one time tune up and not my HP Mini cannot connect to the internet. WLAN is on. It says "No wireless networks were found in range"...when it was just connected before I ran AVG program and has been for monthsWhen I try auto repair it does not find network. When I open Network Connections it says Wireless network Connection 2 Not connected, Firewalled Broadcom 802.11b/g WLAN
View 13 Replies View RelatedI have just installed a Intel Pro wireless card into a HP Compaq nc6120 laptop, downloaded the basic drivers from HP's website but I get "no networks found in range".I've followed this thread: [SOLVED] Laptop Can't Find Wireless NetworkThe laptop was previously using a Sweex USB plugin adaptor and this had been working fine for years. I just fancied getting an internal card for this laptop - but cant seem to get it so work.
View 12 Replies View RelatedI know the network works because my work computer connects wirelessly.When I load the Intel My Wifi Utility it says Network adapter not found.What happened? I didn't do anything different or special...it just stopped working one day.I am running Win 7 64 bit. Toshiba Satellite Laptop.
View 19 Replies View RelatedI have a DELL Latitude 630 running Windows Vista. I checked into a hotel and just cannot find the wifi network on this laptop..IT is a named network and yet all i see is an unnamed network on my list of networks found. My blackberry device can easily locate the network..but the laptop simply refuses. I have tried restarting, playing around with the advanced propoerties of the wifi adapter but all in vain. I can use the office wifi ont he same laptop without any issue..but not in my hotel.
View 2 Replies View Relatedmy network adapter can't be found. so i do i find i/
View 1 Replies View RelatedI thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious. I just installed the 4200v2 as a replacement for a NetGear. I bought for the n performance and the USB for a shared disk/media file server. I connected a640G Western Digital My Book to the USB. I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message. My computer is a 6 month old HP with Windows 7 running Bitdefender Internet. I found I could get to the drive from my wife's Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said). After doing some Internet mining, I found that the issue is the Netbios setting in IPv4. My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200. Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center. Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced. Go to the Win tab and select Netbios enabled.
View 1 Replies View Relatedit says no network found. It worked fine but not now.
View 1 Replies View RelatedI just downgraded from vista to XP on my Compaq pc that a friend gave to me. The hard drives were loaded with junk so i decided to do a fresh install with my Windows XP cd. Everything looks like its working great except it seems as if ive lost all drivers necessary to connect to the internet. Pretty much the computer can't even tell that theres a network adapter installed.
View 10 Replies View RelatedI'm still having problems (as seen in 'Network Controller Not Found (Clueless!)) and have a quick query.I'm trying to locate a specific driver and so far have exhausted my search, can I get anything from the Hardware Id from the Unknown Network Controller?
View 3 Replies View RelatedMy desktop cannot go online suddenly and I reformat my desktop with Windows 7. There's nothing under the network adapter section. My house has wifi router and other laptops can connect to the wifi but my desktop (connect to the modem using cable), cannot.When I tried to run the troubleshoot, it says, it cannot find the network adapter and I have no idea which adapter I'm using.
View 1 Replies View Relatedi jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?
View 1 Replies View RelatedI've got a Philips MT1800, Intel Core 2 Duo package. My network adapters are recognised (1394 Net Adapter, Intel Pro/1000 PM Network Connection), but in unknown Devices the 'Network Controller' drivers are not found (there was a Ralink RT2500 slot before, I'm assuming this is the missing driver??). EVEREST Home Edition recognises a Ralink RT2500 802.11g Wireless Network Adapter (PCI), and my PC finds new hardware on reboot, but it cannot find drivers at all. I've tried a few methods, such as Driver Detective etc. but don't have the original restore CD any more, so don't want to tamper with any other "out of date" drivers. I am not in a situation where I can order a restore CD, so I'm hesitant to System Restore in case something else becomes unresolvable.
View 11 Replies View RelatedAll of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies View Relatedi have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies View RelatedEverything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies View RelatedMy computer started shutting off and not turning on. I had installed new parts a while ago and so I switched the new parts with the old ones (power supply and Graphics card) and it worked again. But i couldnt connect to the internet and i did a diagnoses and it said adapter not found or correctly installed or something like that. I couldnt find the adapter either. I was going to download the network adapter driver from the dell website on to a thumb drive and install in onto my desktop but i do not know which one to download.
View 1 Replies View RelatedI have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP P
View 1 Replies View RelatedRecently, nearly every time I start up my computer, I can't connect to the internet. I have internet, as says my modem, what I don't have is an internet adapter. I've checked the device manager, and network and sharing center, and it just doesn't exist. I restart a few times and by chance it finds the adapter and I can connect. I have no idea what's going on, as Googling has not worked much at all.[CODE]
View -1 Replies View RelatedI found two unknown computers on my network (using Explorer). I have a wireless setup at home (private) with a desktop (wired), two laptops and a phone (wireless).The encryption is WPA2/TKP with a hard to guess password. The two unknown computers were connected this morning and a few minutes after I tried to access them and do some checks,they disappeared could they have been watching me? I didn't check the router page until then and of course, they weren't there.Also, yesterday I was at a coffee place, so could it be that this is nothing and those two computers are from people at the cafe? Is there anything I can do to make sure nobody can access my network, unless it's the computers I want. I haven't manually set up a home network yet. [code]
View 4 Replies View RelatedI have always connected to other computers in my network, including my file server, and all of a sudden, it will not work. This is only happening on one computer. You can connect fine on all the others. I am running Windows 7 SP1, and in the network window, I can see the computers, but when I click on them to connect, it says "The network path was not found". If I access them via their IP in windows explorer, then I can access them . I have never seen this before. I attempted to disable Norton, I even un-installed it, and it still does the same thing.
View 1 Replies View RelatedMy Dell XPS83000 does not find the network card when the PC is started in a "cold" condition. I have to restart the PC 3 - 6 times before the card is found. When the PC is "warm" the card is found without any problem.
View 11 Replies View RelatedI've bought a new Dell N5050, first it was on Ubuntu, then I formatted my disk and now working on Windows 7. Due to that, I've lost many drivers specially for wireless and network. I've downloaded many from here, but I'm still unable to find these 2. In other words, I can't connect to the wireless connection unless I use the Ethernet cable.
here is an image, it's french.
by the way, I've downloaded a lot of drivers, I wonder why I still got these two missing. ( did I download wrong ones?)
" Controleur de réseau = Network controller"
I got a Acer Laptop from my buddy that had windows 7 and when he had it his harddrive had crashed so he put in a older harddrive in it and installed windows Vista. Doing that caused the ethernet and network adapter to not work at all (says it need drivers) and I can't access the internet at all on it. I don't know if I can grab the drivers somewhere else or if I have to just count my losses.
View 11 Replies View RelatedI have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:
An error occurred while reconnecting F: to \SERVERData
Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.
Network Adapter not found on Device manager in normal mode, when in safe mode it shows the Network Adapters
View 1 Replies View RelatedOn my home LAN I have computers running Ubuntu 10.10, Win XP, Win7 32 bit and Win 7 64 bit, as well as an Iomega Home Network Media Drive. I can share files and folders between Ubuntu and XP without problem. I can CRUD (Create, Read, Update, Delete) to the Iomega device from all the computers. I can share folders when using the 64-bit Win 7 computer that are located on the XP computer.
I can see the 'users/Public' folder on the 64bit Win 7 computer from the XP computer (but that folder being empty, this access is not a lot of use - a secondary probelm). I cannot see my 'user name' files/folders on the Win 7 computer from the XP computer
From Computer, Network on the Win 7 computer I can see the Ubuntu computer by name (approximately - it's all in upper case, which is not correct as far as Ubuntu is concerned).
I cannot access files on the Ubuntu computer via its name - I receive the usual 'network path not found' error, inviting me to check the spelling of the computer, which I can see is wrong, but which I can find no way to correct.
If I try to access the Ubuntu computer by IP address, then I am presented with an 'Enter Network Password' panel. I have never allocated a network password, so I have no idea what user name or password to enter here. If I enter my valid account name forthe Win 7 machine, along with its valid password, then a Logon failure is reported: 'unknown user name or bad password'. If I use the single valid user name and password for the target Ubuntu computer, I receive the same failure message. I thought I had set the same user name on both computers (I certainly have the same password), but for reasons best known to Bill Gates, the username on the Win 7 computer has been initially capitalised, making it absolutely not the same as any valid user name on the Ubuntu computer.
So, in short, I can find no way to access the Ubuntu computer from Win 7. Further more the Ubuntu computer cannot see the Win 7 computer in the windows network at all.
I have the same internet security software (Comodo) running on all Windows computers. It is enabled on the XP computer. It is disabled on the Win 7 computer - but with no effect on the failure to connect.
Dell Inspiron laptop n4110-6 gb RAM- 575 gb HD- intel i-5 processor 1333mhz. Win 7 -64 bit
everything was fine until yesterday...started up laptop and noticed the network connection icon in my task bar hd the "red-x" through it...i knew something was up cuz i had ethernet hardline in to my machine. after I had inspected every possible home netwrok issue...i noticed it was more pc related.now i go to my device manager to check my network adapters..... there are NONE listed...i go to "View" to find that unhide all devices and note there are only wireless drivers in this device and NOT the typical "realtek-8111E" controller that SHOULD be listed.
So far...i have done these steps
1) ensured BIOS (my cmos is phoenix tianos build) lan settings are correct- done
2) Removed RAM from slots
3) Removed Cmos Battery
4) waited for 15 minutes.it is still not working ....a i even tried a clean install of win 7 and that doesnt work?
i just reinstalled windows on my laptop and i figured i could just download drivers from the dell website. after following the installation order specified on the website.. installing first the NSS and then the chipset, etc.. I realized there wasn't a driver for the NIC on the website. i also noticed that the steps didn't include a step for ethernet drivers, so i replaced the NIC step with installing the broadcom integrated controller. unfortunately, after completing the rest of the installation steps, my Network Controller driver is still not installed (looking in the device manager), a hardwire connection through the ethernet cable gives me "limited or no connectivity" and there is no wireless capability whatsoever.
dell inspiron 6400, now running windows xp home edition with SP2
I am facing this trouble since i purchased this laptop i have a Dell vostro 2520 running on windows 8 pro X64, so the problem is that whenever i try to install drivers for Ethernet which i downloaded from the drivers and download section of this website it gives me an error "Realtek network controller was not found If in deep sleep mode please plug in the cable" now the thing is that it cannot be a problem in my windows as i was running on windows til few days ago, I got the same problem in windows 7 as well,
I have searched everywhere and i have tried almost every solution i got but to no avail the problem still persist and i cannot use LAN for Internet or file transfers,
P.S:- I looked for the adapter under the "control panel system and security system device manager Network adapters" But didn't found anything there saying Ethernet or something like that.
I am uploading the screenshots of the problem i am facing.
I have 10 Vostro 460s, the network cards are not being found on startup. You have to reboot the systems 3-4 times to get Windows to find the Network cards. All drivers are up to date. This may be related to a Windows update, since the machine were fine for a month or so until an Update came out.
View 95 Replies View Related