Purchased a used Cisco 2821 Router and would like to remove all unnecessary files and folders.
My concern is a hacked Rommon or IOS, is there a way to determine this?
Is there a list of directories, files and folders of all of the necessary system folders so I can know what i can delete?
Is there a way to wipe a 515e clean and get ride of the Failover Only license and just have a basic licesne loaded? I got this off of ebay and I guess I missed where it said Failover Only, and I would really like to use it.
View 2 Replies View RelatedIn the past both of my Dell Laptops running Windows 7 via a router and belonging to HOMEGROUP, have been able to share files back and forth - with the ability to read/write. All of a sudden, one of the laptops (call it #1) was not able to find the shared files of the other laptop (call it #2.) However it worked the other way (#2 could find #1). I did all kinds of research, checked they both still belonged to the Homegroup, sharing was "on", discover network was "on", permissions were "full", etc.
I couldn't get anything to work - when I saw a suggestion that I sign off the Homegroup on both computers, set up a new Homegroup, and try again. I did this and still didn't have any luck - then decided to reboot both laptops.now I have sharing between both computers. BUT - on Computer #1 - the shared folders are like doubled. I have 4 libraries that are shared - Documents, Music, Video, Pictures, and the listed are all the 6 folders that I made sure were set to sharing - but Documents, Pictures, Music, are duplicates of the "library". I'm afraid to change any settings for fear that I'll lose what I finally gained. So my questions is - how can I clean this up so libraries and individual folders are not both shown?
We have 6 brnaches configured with NAC Module in Cisco 2821 ISR router. The WAN link being used to connect all the branch to the HQ CAM is via WIMEX wireless Broadband. The bandwidth is 2MB.OOBVG is the mode used. All branches were working well last 1 year. Last month it is suddently disconnected from the CAM.I opened the TAC. Cisco history of TAC experience, We have total 6 TAC enginners tried one by one still the problem not resolved. The following are the findings
1. Timing is accurate between CAS-CAM
2. Shared secret key correct
3. SSL temp certificate ok also image being used it 4.6.1.
4.Tcpdump from both CAM and shows some initial packet drops of 10 sec with the below CAM log
I believe that NAC is not a matured products and the problem like this even by Cisco TAC can not solve.
On my network, I have 2 PCs running Windows 7 Ult, and 2 PCs running WinXP-Pro.When my XP PCs browse a shared folder living on a Win7 PC, not all files or folders are listed. It is as if once a certain number of filenames have been listed, something gives up.For example, on my WIndows 7 PC, I have a folder with about 400 folders of pictures. The XP PCs only see about 300 folders. The number is consistent as far as the number of folders the XP clients see. It is not a permission problem, because if I move some of the low-numbered folders out of the share, then the names at the bottom of the folder list start to appear.I even copied all picture folders to the other Windows 7 PC, and created a fresh share and still the XP clients only see the same limited number of folders or files. It also seems to be based on a percentage, and not a finite limit of file or folder names. For example, if I have 700 objects in a folder, only 500 are visible on the client. If I have 400 objects in a folder, only 300 are visible.
View 11 Replies View RelatedIs it possible to share files and folder over wifi internet just as with wired internet ? I have 2 Laptops with built in wifi adapter. Can i make them share files and folders through wifi. (No Router or other hardware)
View 3 Replies View Relatedi am trying to share files/folder from a win7 system to a winXP system.Some work ok, but some say i need permissions to open (one in particular i would like is C drive from Win7..
View 8 Replies View RelatedHow to set auto backup folders and files in windows2003Should i use inbuilt utility or should i use any Third Party software if software which is the best one that i use
View 1 Replies View RelatedI am unable to access files or folders wirelessly between my 2 laptops both running Vista. Both machines can see each other. I can access files with a wired connection.When using wireless I get error message 0x8007035
View 2 Replies View RelatedHow can I view a websites files/folders without an account? I'm not trying to 'hack' anything or obtain any data which isnt mine, Theres a website with drivers on it but I dont want to download each 1 indivudually, I would just like to view the folder via filezilla then and queue them all for download.
View 1 Replies View RelatedRegion : United States
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I just got the TL-WDR3600.
It seems to work fine and my Smart TV recognizes my network drive or usb hdd connected to the router.
However, the files on the network drive or usb hdd don't seem to appear/work. The folder the files are stored in are recognized, but not the files themselves.
I've plugged the usb HDD directly to the TV and it recognizes and plays the movie files fine, however when trying to find them via the wireless router, they don't appear/work.
Are there some settings i need to change to allow the TV to see/play the files?
We have our aggregation layer here composed of two N7K with vPC between them. Every access switch is a N5K. Security policies state that we have to filter unnecessary vlans going through the trunk between N5K and N7K. So we use the 'switchport trunk allowed vlan 10,20,30' command. My question is: Do I have to include the native vlan id on this command?
View 10 Replies View RelatedSo what we do when we get new laptops, we "prime" it by connecting to the lan via a cable, name the machine and join the domain. This way it automatically gets the certificate and is a domain member. After logging on at least once via a cable, we can then disconnect it and join the wireless network.
During a routine audit, they suggest also using MAC address filtering. I think this is overkill and an administrative nightmare. To manage MAC address filtering on the 5508 and then also manage the domain accounts is unnecessary. Also down the road we want to offer a segregated public hotspot (webauth), and I'm not sure if MAC address filtering would affect that or not.
I've read that MAC address filtering is pretty much useless, because it's so easy to change your mac address even in Windows device manager. I know I was able to do it as a test.
is MAC address filtering worth the hassle to implement and manage? Or is our current layered security approach enough?
I've been having this issue for quite some time on my Windows 7 SP3 x64 machine. It's a desktop, connected via ethernet to a TP-Link WR740N router, that also provides wireless coverage. My ISP is a local one (the country is Latvia), and it offers a decent 100 MBps up/down optical fiber internet service. Now for the problem - there is only one home network on my computer, that seems to work, and that is 'Network 2'. Whenever I have to reboot the router for whatever reason, it attempts to reconnect, but sometimes reconnects to a 'Network 3' and once even to a 'Network 4' and 'Network 5'. None of these other networks have internet access. I tried to run the diagnostics tool on the issue, and usually it told me that there's a problem with the default gateway. Additionally, twice I've had the issue of the computer completely freezing when connected to one of the Internet-less networks (eg 'Network 3'), and trying to disable the network adapter, forcing a restart that consequently caused a fail boot - from there on I had to use System Restore to actually get my PC to function.
The way I've been fixing it, apart from random rebooting, reconnecting, and hoping for the best (that it decides it wants 'Network 2'), is by putting in the Resource Mini CD that came with my router, and running the Wizard for the WR740N router. It has 4 steps, the 2nd of which is 'Installing the router' (configuring the network adapter), at which point, my internet starts to work (always connects to 'Network 2'). If, I however, decide to continue this process to the step 'Configure router', and attempt to set up my wireless connection, it will begin to reset itself, and once again connect to 'Network 3', leaving me without internet access.
We have many 3002's that we are retiring and want to clear the config, how can this be done, the reset etc, does not do it.
View 4 Replies View RelatedMy company is doing an nationwide upgrade of it's leased 2951 routers. For security sake I need to wipe everyone of them before being sending them back to the leasing company. I would like to somehow boot to a USB drive and call it a day.
View 4 Replies View RelatedWith Norton 360 Antivirus, is there a feature that allows you to make it clear your hard drive of all unnecessary files that are slowing down the CPU? (similar to what the technicians for dell do when you call, they delete everything unnecessary) I've done the temporary file removal and it didn't do much, along with the full system scan. If Norton can't do this, is there any way to make a software go through the hard drive and delete all the crap?
View 5 Replies View RelatedI just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies View RelatedI have an inspiron 1545. I had to wipe the drive and reinstall, I have the OS disc but do not have (and cannot remember if it came with) any other installation discs for it. I have downloaded the drivers off of the Dell site for the laptop and put them on it via usb, and installed them. However It will not connect to anything. It will not connect wireless or hardwired. Is there a particular installation driver I'm missing and can download? Can I download a virtual disc of the ones I no longer have?
View 1 Replies View RelatedJust upgraded our WCS server to the 7.x code over the weekend. Turned up the first 3500 series AP's today. The AP's have been up for about an hour. I am seeing the Air Quality graphs on WCS. On the Worst 802.11a/n and 802.11b/g/n Interferers windows, I am see a WCS System Error Page message but only in those windows. I have gone over the documentation and dont see that I need to enable anything else on WCS.
View 10 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedFor a Campus setup (University), if I deploy 1142 AP's on all the floors with a WLC controlling them, and put one 3500 AP on each floor, will that give sufficient Clean Air support with automatic Rogue elimination? What about if an AP drops, does the WLC automatically try to cover that area with neighboring AP's? I know the old WLSE would be able to do that, but not sure if the WLC can do that by itself. What part of Self Healing can the WLC do with Clean Air, or is a WCS a must have in order to automatically Defend and self heal? Also is the MSE needed for this if a WCS is used? What does the MSE do that the WLC and WCS can't?
View 4 Replies View Relatedproperly patching and/or cleaning the ACS version listed in the title.
First off - what does the Cleaning utility do?
Second - I have obtained the two following files:
ACS-4.2.0.124.17-SW
ACS-4.2.0.124.16-Clean
Can these both be used to correct a problem we have with our current installation?
we have this:1x wlc 5508 7.2.1031x cisco prime infrasture physical appliance 1.2And for test of clean air 1x ap 3600 seriesBut i have a question if i would like see bluetooth device in neighborhood. On the cisco web i founded 3355 or virtual appliance.
View 1 Replies View RelatedHard drive is getting full on LMS 3.2 The only thing this server is running is LMS and Wireshark. What is safe to delete to free up space. Or is there a setting to purge the database so that old data isn't kept for so long.
View 1 Replies View RelatedI have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
View 3 Replies View RelatedJust had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led. The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?
View 5 Replies View RelatedI have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.
I have a dual 5508 controller /NCS deployment. I deployed my first clean air AP today, a 3502I.
The Clean Air feature does not seem to work, however. "No information is available because CleanAir is disabled or otherwise not available for this radio. If no information is available and CleanAir is enabled then you can try rebooting the AP XXXX".The thing is that CleanAir is enabled on this AP.
getting the iPad to work with Clean Access? Currently running v4.7.2 NAC.
View 6 Replies View RelatedI am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
i configured a new ASR1002 router yesterday,i powerd on the ASR1002 to check the device include some SPA moduler,but i found my console screen display like this""Warning: filesystem is not clean"and "%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash contained errors which were auto-corrected."while ASR1002 power on.
View 4 Replies View Related