Cisco Security :: IPad Client For Clean Access V4.7.2 NAC

Jul 14, 2010

getting the iPad to work with Clean Access?  Currently running v4.7.2 NAC.

View 6 Replies


ADVERTISEMENT

Cisco Security :: Clean Access Agent 4.0.5 Certificate

Feb 9, 2011

We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
 
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.

View 1 Replies View Related

Cisco Security :: 2821 Couldn't Connect To Clean Access Server

Jan 30, 2011

We have 6 brnaches configured with NAC Module in Cisco 2821 ISR router. The WAN link being used to connect all the branch to the HQ CAM is via WIMEX wireless Broadband. The bandwidth is 2MB.OOBVG is the mode used. All branches were working well last 1 year. Last month it is suddently disconnected from the CAM.I opened the TAC. Cisco history of TAC experience, We have total 6 TAC enginners tried one by one still the problem not resolved. The following are the findings
 
1. Timing is accurate between CAS-CAM
2. Shared secret key correct
3. SSL temp certificate ok also image being used it 4.6.1.
4.Tcpdump from both CAM and shows some initial packet drops of 10 sec with the below CAM log
 
I believe that NAC is not a matured products and the problem like this even by Cisco TAC can not solve.

View 1 Replies View Related

Security / Firewalls :: Get Security Key Password For My IPad?

Jun 10, 2012

How can I get the security key password for my iPad?

View 2 Replies View Related

Cisco Security :: RDP Access For Remote VPN Client On ASA 5510?

Jan 17, 2011

We have configured site to site VPN tunnel from offshore to client location using ASA5510 and accessing RDP from client location. Also configured remote VPN access at offshore location. But using remote VPN client we are able to get RDP from officeshore location but not able to access RDP from client location. Is there any additional changes required ?

View 4 Replies View Related

Security / Firewalls :: VPN Client Users Cannot Access LAN?

Jul 23, 2012

I configured a dynamic vpn(easy vpn) in a cisco isr. But the vpn clients cannot access any of the lan devices. VPN pool is 10.0.0.1- 10.0.0.20 & internal netwrk add is 172.17.x.x. I tried to disable zone based firewall but no resultout[CODE]

View 1 Replies View Related

Cisco Firewall :: 5510 Security Plus To Terminate Client VPN Access For External Support Team

Aug 7, 2012

I have a customer that wants to purchase an ASA 5510 security plus to terminate client VPN access for an external support team. The customer claims to want URL content filtering/proxy which leads me to suggest a CSC SSM 20 plus module. But upon further conversation, he mentioned wanting IPS. In this case, the customer does not seem to know the difference between the URL content filter/proxy and the IPS and uses both terms interchangably.
 
1. What would you suggest in your expert opinion would be the best module to get for this customer? IPS or CSC
 
2. If I go with the CSC module, where can I find good documentation on how to configure it and get it up to date?
 
3. does the CSC module provide any web proxy functionality?

View 3 Replies View Related

Cisco VPN :: ASA 8.0.4 - IPad Client Certificate Authentication?

Jul 8, 2010

The IPAD VPN works great over token, radius and local authentication. But now we need to authenticate vpn client via digital certificate (only vpn authentication between client and gateway)? I'm not sure which certificate we should buy to authenticate vpn client.The plan is to install digital certifiacte on VPN Gateway (CISCO ASA 8.0.4) and IPAD Cisco IPSec client to eliminate user/pass authentication.

View 9 Replies View Related

Cisco Routers :: RVS4000 SBR And Non Client VPN IPhone / IPad?

Jan 5, 2012

How to make a non-client VPN connection to the RVS4000 SBR with an iPhone or iPad? I realize that I could setup some pass-through VPN just fine, but I would like to connect directly to the router and was under the impression from the Cisco product video and other research that IOS was now supported.

View 0 Replies View Related

Cisco VPN :: Asa 5505 - Connect From IPad With IPSec Client

Jan 27, 2013

Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.

View 6 Replies View Related

Cisco AAA/Identity/Nac :: Clean Access Agent With NAC V 4.7.2 And Windows 7?

Nov 15, 2011

I have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Download Clean Access Agent 4.8.2

Jan 14, 2012

I have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
 
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?

View 1 Replies View Related

Cisco VPN :: Get IPad Using Built In VPN Client To Connect To ASA5510 Version 8.2(5)?

Feb 9, 2012

I have been working on trying to get an IPAD using the built in VPN client to connect to an ASA5510 version 8.2(5). I have attached the debug from where I have gotten so far.  Phase 1 is failing somewhere but the messages aren't real clear or at leat not to me.  The ASA is acting as the local CA for the certificate. I inherited the config from another guy as he couldn't get it working and I have made some progress but still not luck in getting the tunnel to just come up. Access to resources will be next but I'd like to just see the ipad show connected. 

View 3 Replies View Related

Cisco Routers :: Working Configuration To Connect IPad VPN-client To RV042

Nov 11, 2010

Any working configuration to connect the iPad VPN-client (IPSEC) to the RV042?

View 16 Replies View Related

Cisco Security :: Use NAC 4.8 Web Agent Login With Ipad?

Jun 13, 2011

I'm using NAC 4.8, and I'd like to login using NAC Web Agent on Ipad. When I'm trying to do that, I'm receiving a message on Ipad that I need to install Java Plug-In, but there is no JavaPlug-in available for Ipad. Any additional configuration that I have to do on NAC Manager to be able to access the network using NAC Web Login on Ipad ?

View 3 Replies View Related

AAA/Identity/Nac :: Configure Clean Access Manager And Switch 3560E-24Ps On SNMP

Jun 11, 2011

I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). [code]

View 3 Replies View Related

Sharing :: Access Audio From NAS On IPad?

Sep 17, 2012

Im curious to know if there is a way, to stream music to my iPad from a drive connected on my network? Either by USB to the router or a hard wired NAS. Im aware of programs like Streamtome but this requires a mini server running on a PC which is want i want to avoid!

I know there are things like the slingbox etc but i cant believe its needed! If you can access the files on a MacBook on the wireless why not an iPad?

View 1 Replies View Related

D-Link DIR-601 :: IPad 2 Can't Access Internet

Jul 20, 2011

I just bought this DIR-601. After many sleepless night, I finally make it work with my PC(AT&TDSL modem). I can access internet with PC, but not ipad2 WiFi.ipad2 WiFi can see this router and I can select it after putting password. BTW, ipad2 Wifi should be OK, since I can access Wifi networks on my company no problem.

View 3 Replies View Related

Cisco :: 5508 Controller - IPad Network Access

Mar 26, 2013

I recently had a 5508 controller installed and configured for a corporate network as well as internet only guest access. Users authenticate via 802.1X key management on the corporate network and web authentication via guest. This works fine, however, I've run into a problem. We also use iPads for inspections and the inspection site is housed internally. I've had a network admin create an exception in the firewall that will allow connection to the internal sites from the guest network, however, it does not function. I did find that if I connect an iPad to the corporate wireless network I'm able to download the necessary certificate to the device but that only works if I use my login information which is not something I am interested in doing. Is it possible to enable another authentication for the corporate network without breaking the functionality of the existing 802.1X authentication? What could possibly be the cause on the guest network not allowing connectivity to the internal sites, even though the exception has been created?

View 3 Replies View Related

D-Link DIR-655 :: Access Wireless Devices From An IPAD?

Dec 26, 2011

I have a DIR-655 with the latest firmware 1.35NA. I also  with a wireless connection  to a Grace internet radio and a DAP 1522 (with the latest firmware 1.31)  set up as a bridge with my direct tv box connected . The DIR-655 ip is 192.168.2.1, Grace radio ip is 192.168.2.177, DAP-1522 ip is 192.168.2.3 and Direct TV box ip is 192.168.2.173. My PC is hardwired  to the DIR-655. I can ping all devices from my PC, but cant ping the DAP 1522, Direct TV Box or Grace Internet Radio  from my IPAD. I have no trouble connecting to the DIR-655 from my Ipad. It only seems to be anything thats connected wireless to the DIR-655 that I cant access from my IPAD. All devices have the same subnet of 255.255.255.0 and gateway of 192.168.2.1.

View 7 Replies View Related

Cisco Routers :: WRV200 VPN Router And IPad Connection For Nas Access

Jan 7, 2013

is it possible to make a VPN Connection with my Ipad and a WRV200 Vpn Router ?? The WRV200 is in my Company and i can start a VPN Connection with my Laptop. So this works. But is it also possible with my Ipad, so that i can get access to my NAS (Which is in my Company also)??

View 1 Replies View Related

Cisco Routers :: How To Access RV220W Admin Page On IPad

Jul 14, 2011

How to access the admin page of the RV220W from an iPad wih the default security certificate? If so, what steps did you go through? Or is this only possible when purchasing a certificate?

View 10 Replies View Related

Cisco VPN :: IPad Remote Access VPN (ipsec) Setup On ASA5540

Jul 9, 2012

I had IPAD setup IPSEC Remote Access VPN to try to conect to ASA5540 and Cat65 VPN service module(V1).I works fine on Cat65 VPN service module using IPAD client, but it is fail on IPAD client connect to ASA5540.THe message should be "VPN server is no response".My laptop Cisco VPN client(Windows 7) works fine on both (Cat65 VPN module and ASA5540).There is any special setting for IPAD client on ASA5540 ? The IPAD ios version 5.1.1.The ASA5540 version 8.4(4)1 ADSM 6.4(9) The Cat65 version is quit old binding with CatOS V12.2 etc.

View 2 Replies View Related

Cisco Security :: ASA 8.0.4 / Anyconnect Client Under Mac OS X

Mar 15, 2009

I've got a short trouble running anyconnect client 2.3.254 under Mac OS X 10.5.6.If I use it to connect an ASA 8.0.4 through a proxy (squid) it doesn't work.If I use Win XP, with same proxy, it works.If I don't use any proxy, with my Mac OS X client (on another WAN access) it works too.So, is anyconnect client supported over proxy server on MAC OS X ???? or did I miss something ?

View 9 Replies View Related

D-Link DIR-655 :: Can't Access Youtube Videos On Computers And IPad

Aug 5, 2012

And I can't seem to access Google and Youtube on my iPad, even Yahoo doesn't work. It all started when I updated my DIR-655 to the newest firmware 2.07NA because I wanted to have an Open NAT for my PS3 because it was set on Strict and I wasn't able to fix it other than updating my router. Now, Youtube works, but I can't play any videos, it's keep in a infinite loop. And I can't access some sites, such as Google, Youtube Facebook and Yahoo, on my iPad, it just won't load.

I just don't know what to do, I'm not really a crack when it comes to router, I don't know jack about my router to be honest, I know how to set the Wi-Fi, forward ports but that's basically all. It seems that it is a firewall problem, but I don't even know how my firewall settings works! UDP and TCP are set on Endpoint Independent but putting them into default doesn't do much, well it does nothing.

it is starting to get ridiculous, the DIR-655 is full of problems! My connections was always jumping, IP Conflict but now it's fixed, Flash videos wasn't able to run outside Youtube

View 14 Replies View Related

Linksys Access Point :: IPad Keeps Disconnecting From WAP2000?

Jan 20, 2011

I have an iPad 1 with newest iOS version connecting to a WAP2000 device setup with WPA2 Personal, MAC Address Connection Control enabled and SSID Broadcasting disabled, VLAN enabled (WAP2000 is running on latest firmware). Everything works well, but I keep seeing my iPad disconnecting (WIFI icon disappearing in status bar) after about 30-40 minutes of using wireless. It then takes about a minute until it connects again.

View 3 Replies View Related

Linksys Access Point :: IPad Keeps Disconnecting From WAP2000

Nov 13, 2011

I have an iPad 1 with newest iOS version connecting to a WAP2000 device setup with WPA2 Personal, MAC Address Connection Control enabled and SSID Broadcasting disabled, VLAN enabled (WAP2000 is running on latest firmware). Everything works well, but I keep seeing my iPad disconnecting (WIFI icon disappearing in status bar) after about 30-40 minutes of using wireless. It then takes about a minute until it connects again.

View 1 Replies View Related

Cisco Security :: ASA 5510 Client Static IP

Sep 28, 2011

I have a ASA 5510 that uses Radius for Authentication.  What I am trying to do is assign each user that logs into VPN to have a specfic static IP based on userid.  I have about 30 to 50 users.  I don't want to complicate this by having them select a different profile when logging into the ASA.  What is a clean and simply way to assign user static ip and not use local database for login?

View 1 Replies View Related

Linksys Access Point :: WAP610N - IPhones And IPad Don't Want To Connect

Nov 19, 2012

iPhones and iPad don't want to connect.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - IPad And IPhone Access To Internet

Dec 26, 2010

I have local WI-Fi network with 2 Macs, 2 PC's, iPhone, iPod and i Pad at home on Link sys WAG120N router. On i Pad when I try to connect to Internet I have to turn WiFi off and on. It works for a while but after waking i Pad from sleep I have to switch off and on again. It really drives me crazy. Sometimes (hardly ever) it happens on my iPhone 4 (same network setup as on i Pad). Other devices connect to Internet whenever I need.

View 9 Replies View Related

Cisco :: WLC 5508 How To Enhance Client Security Authentication

Dec 20, 2012

Security during client authentication is enhanced by applying both 802.1X and Web Authentication for a WLAN." 

View 7 Replies View Related

Security / Firewalls :: Cisco Ipsec Client Remote Subnet

May 25, 2011

My employees connects with a cisco ipsec vpn client to asa1,They can connect the network 192.168.1.0/24 from the employee location.(192.168.3.10 - 192.168.3.15) ip pool.Some people must also have a connection to the 192.168. 2.0/ 24, is it possible when they connect to asa1 with the ipsec vpnclient and that the 192.168.2.0/24 network also is avaible.

View 3 Replies View Related

Cisco Security :: 2801 - VPN Client Asks For Re-authentication Between 20 And 50 Minutes

Sep 20, 2011

We have configured an 2801 to aggregate some VPN clients. The problem is that between 20 and 50 minutes it asks for re-authentication even though the connection is not idle. Is there a timer that creates this problem?
 
Below the applied configuration :
 
crypto isakmp policy 1
encr 3des
authentication pre-share

[Code].....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved