I'm using NAC 4.8, and I'd like to login using NAC Web Agent on Ipad. When I'm trying to do that, I'm receiving a message on Ipad that I need to install Java Plug-In, but there is no JavaPlug-in available for Ipad. Any additional configuration that I have to do on NAC Manager to be able to access the network using NAC Web Login on Ipad ?
View 3 Repliesi can configure a requirement type as audit (opposed to mandatory or optional), so the client will still access the network, the user will not be notified, and the information will be sent to the cas.It is possibile to generate an email or similar automated process to notify administrators on these audits?
(version in use 4.7.2)
We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.
We have some Windows 7 clients that are running the 4.8 agent. NAC will process the user and move them to the trusted vlan. However, the agent stays open and appears to keep running/processing something. THe user can minimize the agent and work normally, and a reboot appears to fix the issue.
View 5 Replies View RelatedI have a Cisco 7200 acting as the DHCP relay agent on my network. From a security standpoint, I want to disable the bootp server, with 'no ip bootp server'. What bearing, if any, does 'no ip bootp server' have on DHCP activity?
View 8 Replies View RelatedHow can I get the security key password for my iPad?
View 2 Replies View Relatedgetting the iPad to work with Clean Access? Currently running v4.7.2 NAC.
View 6 Replies View Relatedi have in my network firewall ASA 5510 but the problem i cannot login to my firewall thru telnet or ssh even ASDM or bowser this is my configuration :
ASA Version 8.2(5)
!
hostname Amco-ASA
[Code].....
I did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but I can not ping my ISE server after full installation.I did the installation several times and even did it on a VM with differrent VMversion.
View 3 Replies View RelatedMy college uses cyberoam for all network security. On windows i can successfully log into my account without any problem. But when I do the same on ubuntu(tried on various versions but failed!), the client returns "You are not allowed to login from this machine." I did the same thing as the instructions from the website said, but failed.
View 4 Replies View RelatedI have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.
View 1 Replies View Related'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type >en.Then the enable password.
View 1 Replies View RelatedEverytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
Can't seem to get the settings right to automatically login like my laptop does. Routers can be humbling.
Using AnyConnect Secure Mobility Client, logging into ASA5540. After I put my credentials in, I get the banner message (from group policies). After I accept that, I get another pop message stating:It looks like a pre-set message. Where can I disable and/or edit this message?
View 4 Replies View RelatedIs there any way to do layer 3 security like a web login to an LDAP server on the wireless portion of the SA 520W?I'm asking because we have this set up on many of our Cisco Wireless Controllers and I would like to do it on the SA520's as well. I'm not sure if it's supported though.
View 2 Replies View RelatedI have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies View RelatedWe have ACS 4.2.0.124 runnning with remote agent installed on win 2003/32 bit ent server. Now we are facing issue like logs (daily backup) from ACS to the Remote Agent is not happening properly. We usually get logs around 1 MB everyday in remote agent but sometimes we are getting 1 KB continuosly untill the services to be restarted in ACS manually.
View 9 Replies View Relatedin my test LAB i have used a 5505 running 9.1.1.I have setup a DC (2008R2) and then AD Agent.I have configured and used Identity firewall rules which worked like a charm.I have also used LDAP Auth which also worked fine.I then disabled all the rules but kept the identity firewall checked.Since it was a lab environment, i had to remove the DC for other tests.A few hours later the ASA initially was stuck.I used the console and i saw it could ping noone! not even directly attached PCs or defgw (i was able to ping them before it stucked).No arp table also!the asa did no NATing so no xlate entries were vavailable.Then i sshed to it.I got a blank screen and from console i could see cpu-usage from ssh to 20%I opened a second ssh: nothing. Blank Screen again. cpu-usage from ssh to 40% (overall ~50%)I opened a third ssh: nothing. Blank Screen again. cpu-usage from ssh to 65% (overall ~75%)I issued reload from console! Nothing! it was trying to shut down!I issued reload quick-> that is when console was lost!!I have to unplug it.
The DC that was removed was also the DNS for the ASA.The only log message i could see, before it stuck was "AD Agent is out of reach".i have ttried this 4 times. Always the same. 100% reproducible.I disabled the identity firewall-> no problem! it worked for days.100% reproducable.I downgraded to 8.4.5--> the same for both above actions.
I have created a NAC Agent Customization Package and sucsesfully uploaded the 'custom.zip' file to - Policy>Policy Elements>Results>ClientProvisioning>Resources.
However, when I try to edit my Client Provisioning Policy and select AgentCustomizationPackage, my custom package dosn't appear on the drop down list, so i'm unable to select it!
I am implementing Cisco Network Access Control with Wireless Controller 5508 (WLC5508 below) . Could you tell me how to register WLC5508 as SNMP Agent for Cisco Access Manager (CAM below) ?
[System Information]
IOS version of WLC5508: 7.0.98.218
Version of CAM: 4.8.0
[Code]....
I succeeded to register WLC5508 by using IP address of Service Port on the CAM Web Console. But WLC5508 has only one Service Port, which has no redundant port. I want to register it by usin Management Interface, which has backup port. It is also desirable to implement redundancy of Service Port if possible.
We have a working L2 OOB VG deployment. The NAC agent pops up then says it has granted full access. The issue is about 45 seconds later it pops again then says it has granted full netowrk access. Then it does it again...etc.... The CAM thinks things are fine as it just keeps adding the user to the OUL.
View 4 Replies View RelatedPresently we are upgrading the existing domain controller to Windows Server 2008, R2 Standard Edition.
I'm bit confound with the information available for the upgrade scenarios. Listed out the present working versions.
Cisco ACS SE - Release 4.1(1) Build 23 Patch 5
Cisco ACS Remote Agent version 4.2(0.124)
As the new operating system is going to work on 64 Bits, I think the existing ACE SE and remote agent may/should be upgraded.
Based on my existing versions, provide the possible upgrade scenarios available for me.After upgrading SE and Remote Agent should be working for 64 bit OS.
I have two ISE appliances installed in a distributed deployment (primary "ISE1" and secondary "ISE2"), each node has the three personas installed on it. The servers are registered together and the replication is working properly between the nodes.When we are working on the first node everything is fine, if I try to disconnect ISE1 and do my tests on ISE2, the cisco NAC agent doesn't popup, unless I uninstall it and reinstall it again from the ISE2. Then it will work properly.
View 31 Replies View Relatedits been a while since I configured a Cisco firewall (PIX 6.0, SDM) - I've now been thrown in the deep end with a pair of 5525-X's (Latest Software) and I need to achieve the belowWebsense integration (Got this working)AAA Authentication for various outbound traffic routes.I'm using ASDM as I'm more comfortable with the GUI than CLI (I'm the other way round with switches!!!), I have AD Agent configured but the ASA isn't doing anything based on User Name but I have a few other things to try. What I'm trying to achieve now is ignoring certain user names from being matched to IP Addresses as I believe that this may have something to do with it.We use Sophos AV and each PC requires a Service Account to run Sophos under. Each update that Sophos attempts is seen as a login and that is the user attached to the IP Address of the machine. Within Websense, it can be told to ignore certain users for purposes of filtering and reporting etc.. but I dont seem to be able to do this with the AD Agent.
View 3 Replies View RelatedI have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
View 3 Replies View RelatedI have been doing a bit of reading on the ACS 4.2 remote agent compatibility with Windows 2008 R2, and it seems like the only way out is to upgrade the ACS to 5.2. We have Cisco ACS 4.2 SE and if I install the Remote agent on a Windows 2003 member server instead of the 2008 R2 DC.
View 3 Replies View RelatedI have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
The problem is that i had configured the ACS appliance with a remote agent to Integrate with Microsoft active directory and I installed that agent on one of our domain controls and it is working fine.
When I installed another agent on anther domain control and add it to the ACS server it appear that the remote authentication service is working on it but when try to make the new agent the primary and the old one the secondary from External database configuration all the domain users authenticated but only to one group which configured in Unknown User Policy.It appeared like it can't read any more groups from active directory.
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View Relatedhow to configure dhcp relay agent and how it's work
View 1 Replies View Relatedwe're currently evaluating how we can attach our web based business application to the AD Agent in order to perform Single Sign-On against it. Our users are connecting via VPN to an ASA 5510 which is configured to use our Active Directory for authentication. After access granted the users may access a web server with our business application and should be automatically logged-in there without having to re-type their credentials.
View 0 Replies View Related