We have a working L2 OOB VG deployment. The NAC agent pops up then says it has granted full access. The issue is about 45 seconds later it pops again then says it has granted full netowrk access. Then it does it again...etc.... The CAM thinks things are fine as it just keeps adding the user to the OUL.
View 4 RepliesWe have ACS 4.2.0.124 runnning with remote agent installed on win 2003/32 bit ent server. Now we are facing issue like logs (daily backup) from ACS to the Remote Agent is not happening properly. We usually get logs around 1 MB everyday in remote agent but sometimes we are getting 1 KB continuosly untill the services to be restarted in ACS manually.
View 9 Replies View RelatedI have created a NAC Agent Customization Package and sucsesfully uploaded the 'custom.zip' file to - Policy>Policy Elements>Results>ClientProvisioning>Resources.
However, when I try to edit my Client Provisioning Policy and select AgentCustomizationPackage, my custom package dosn't appear on the drop down list, so i'm unable to select it!
Presently we are upgrading the existing domain controller to Windows Server 2008, R2 Standard Edition.
I'm bit confound with the information available for the upgrade scenarios. Listed out the present working versions.
Cisco ACS SE - Release 4.1(1) Build 23 Patch 5
Cisco ACS Remote Agent version 4.2(0.124)
As the new operating system is going to work on 64 Bits, I think the existing ACE SE and remote agent may/should be upgraded.
Based on my existing versions, provide the possible upgrade scenarios available for me.After upgrading SE and Remote Agent should be working for 64 bit OS.
I have two ISE appliances installed in a distributed deployment (primary "ISE1" and secondary "ISE2"), each node has the three personas installed on it. The servers are registered together and the replication is working properly between the nodes.When we are working on the first node everything is fine, if I try to disconnect ISE1 and do my tests on ISE2, the cisco NAC agent doesn't popup, unless I uninstall it and reinstall it again from the ISE2. Then it will work properly.
View 31 Replies View Relatedits been a while since I configured a Cisco firewall (PIX 6.0, SDM) - I've now been thrown in the deep end with a pair of 5525-X's (Latest Software) and I need to achieve the belowWebsense integration (Got this working)AAA Authentication for various outbound traffic routes.I'm using ASDM as I'm more comfortable with the GUI than CLI (I'm the other way round with switches!!!), I have AD Agent configured but the ASA isn't doing anything based on User Name but I have a few other things to try. What I'm trying to achieve now is ignoring certain user names from being matched to IP Addresses as I believe that this may have something to do with it.We use Sophos AV and each PC requires a Service Account to run Sophos under. Each update that Sophos attempts is seen as a login and that is the user attached to the IP Address of the machine. Within Websense, it can be told to ignore certain users for purposes of filtering and reporting etc.. but I dont seem to be able to do this with the AD Agent.
View 3 Replies View RelatedI have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
View 3 Replies View RelatedI have been doing a bit of reading on the ACS 4.2 remote agent compatibility with Windows 2008 R2, and it seems like the only way out is to upgrade the ACS to 5.2. We have Cisco ACS 4.2 SE and if I install the Remote agent on a Windows 2003 member server instead of the 2008 R2 DC.
View 3 Replies View RelatedI have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
The problem is that i had configured the ACS appliance with a remote agent to Integrate with Microsoft active directory and I installed that agent on one of our domain controls and it is working fine.
When I installed another agent on anther domain control and add it to the ACS server it appear that the remote authentication service is working on it but when try to make the new agent the primary and the old one the secondary from External database configuration all the domain users authenticated but only to one group which configured in Unknown User Policy.It appeared like it can't read any more groups from active directory.
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View RelatedI'm somewhat new to ACS and am trying to complete a migration from 4 to 5.3.Currently, I've got ACS joined to my (2003) domain, and it shows status connected (although the test connect fails). I have aaa working without issue for TACACS, but all RADIUS authentication is currently failing. Logs show the message below: "24401 could not establish connection with acs active directory agent"I'm not seeing anything telling in the logs on the domain controllers.
View 1 Replies View RelatedACS 4.2 and remote agent was working properly two months before. But in past two months we are facing weird issue in RA server.For Somedays we are missing logs from both ACS and RA server. Once we notice this we use to restart the services in ACS to give workaround. But due to this we loose our daily logs intermittently and facing risk in without having logs.This is not like communication between ACS and RA is not at all happening. It happens properly for a week or month, but again it is going bad without any config change. CSAgent.ini file is properly configured.Full version is 4.2.1.15 and patch is 10 in acs and ra.ACS and Remote Agent Major and Patch version are same.
View 5 Replies View Relatedinstalling the Cisco NAC agent through the Active Directory Group Policy. (Windows 2008 R2)Currently Cisco NAC CAS servers has been installed, configured and the switches are added. But the ports are not active. Currently users are not passing through the NAC. When the ports are active and the users trying to access the network, the browser will ask the users to install the Cisco NAC Agent.I need t by pass this by installing the Cisco NAC agent through the active directory Group Policy. How to install the Cisco NAC agent (4.9.1) to all the users in the Network (Windows XP / 7 )through Active Directory so that the users will not know that the Cisco NAC agent has been installed in their computers. By this way the users need not install the Cisco NAC agent through the Web browser and will just login their user name and password and get into the network.
View 1 Replies View RelatedI'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
Will updating drivers with instant share devices neede... I do not have such a CD to insert?/ and it will not let me continue to install a new HP Printer/fax that I have... I have a lap top and table top computer, the lap top is wireless and am trying to get the desk top to be also so I can use the wireless aspect of the HP printer/ fax.
View 1 Replies View RelatedWe have a NETGEAR router that we have been using for at least a year now which has not given us any problem. I bought a new laptop yesterday and created a new network on it to establish internet connection for it. Now however, the internet is not working on another laptop or the XBOX 360. The older laptop even says it's connected but the the brower pops up, it just says cannot display webpage. I feel like I've tried every strategy that I know of and it still doesn't work.
View 1 Replies View RelatedMy computer connects to the internet but when i try to get it on it pops up webpage cant be displayed.Then when i diagnose the problem it says somethings wrong with my proxy server ive followed the instructions.
View 2 Replies View RelatedI have the wireless guest access set up in my E4200 flash to the latest firmware. When I connect to the wireless guest network it comes up under the 192.168.33.xx IP address. I can connect fine but it never pops up the browser so that you can type in the guest password. I'm running Windows 7 but I've also noticed the exact same problem under XP.The only thing I can guess is the problem is that I have this acting like an access point and all DHCP requests go to my router. I've basically turned off DHCP on this and plugged the network connection into the switch on the back.
View 3 Replies View Relatedin my test LAB i have used a 5505 running 9.1.1.I have setup a DC (2008R2) and then AD Agent.I have configured and used Identity firewall rules which worked like a charm.I have also used LDAP Auth which also worked fine.I then disabled all the rules but kept the identity firewall checked.Since it was a lab environment, i had to remove the DC for other tests.A few hours later the ASA initially was stuck.I used the console and i saw it could ping noone! not even directly attached PCs or defgw (i was able to ping them before it stucked).No arp table also!the asa did no NATing so no xlate entries were vavailable.Then i sshed to it.I got a blank screen and from console i could see cpu-usage from ssh to 20%I opened a second ssh: nothing. Blank Screen again. cpu-usage from ssh to 40% (overall ~50%)I opened a third ssh: nothing. Blank Screen again. cpu-usage from ssh to 65% (overall ~75%)I issued reload from console! Nothing! it was trying to shut down!I issued reload quick-> that is when console was lost!!I have to unplug it.
The DC that was removed was also the DNS for the ASA.The only log message i could see, before it stuck was "AD Agent is out of reach".i have ttried this 4 times. Always the same. 100% reproducible.I disabled the identity firewall-> no problem! it worked for days.100% reproducable.I downgraded to 8.4.5--> the same for both above actions.
I'm using NAC 4.8, and I'd like to login using NAC Web Agent on Ipad. When I'm trying to do that, I'm receiving a message on Ipad that I need to install Java Plug-In, but there is no JavaPlug-in available for Ipad. Any additional configuration that I have to do on NAC Manager to be able to access the network using NAC Web Login on Ipad ?
View 3 Replies View RelatedI am implementing Cisco Network Access Control with Wireless Controller 5508 (WLC5508 below) . Could you tell me how to register WLC5508 as SNMP Agent for Cisco Access Manager (CAM below) ?
[System Information]
IOS version of WLC5508: 7.0.98.218
Version of CAM: 4.8.0
[Code]....
I succeeded to register WLC5508 by using IP address of Service Port on the CAM Web Console. But WLC5508 has only one Service Port, which has no redundant port. I want to register it by usin Management Interface, which has backup port. It is also desirable to implement redundancy of Service Port if possible.
i can configure a requirement type as audit (opposed to mandatory or optional), so the client will still access the network, the user will not be notified, and the information will be sent to the cas.It is possibile to generate an email or similar automated process to notify administrators on these audits?
(version in use 4.7.2)
We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.
how to configure dhcp relay agent and how it's work
View 1 Replies View Relatedwe're currently evaluating how we can attach our web based business application to the AD Agent in order to perform Single Sign-On against it. Our users are connecting via VPN to an ASA 5510 which is configured to use our Active Directory for authentication. After access granted the users may access a web server with our business application and should be automatically logged-in there without having to re-type their credentials.
View 0 Replies View RelatedI want to configure ad agent on windows server 2008 R2 SP1 with all need patch installed.When i try to connect to DC with adacfg dc list, status is UP. Log ADOBserver's don't show any errors. But when try to do command "adacfg cache list", result - empty. In what may be the problem? Perhaps it is related to the language of the OS?
View 4 Replies View RelatedI have a 2921 with 4 segments: [code] My DHCP server is 172.16.5.2 and I need to serve clients from 172.16.2.0/23 by MAC address and only to that segment.
View 2 Replies View RelatedI'm trying to install Active Directory Agent in Windows 2003 (not R2) to configure Identity Firewall with ASA 5505 8.4.(2). The installation runs ok but the agent doesn't start because the WatchDogService.exe fails. I don't find any information about AD_Agent.
View 5 Replies View Relatedrecommendations on a hardware/software inventory tool that comes with an agent.I manage a windows network of about 150 machines and would like to be able to install the agent on each machine and then get an overview of all the machines on the network with list all their installed hardware and software. Also we have laptops that leave the network. I would like them to "phone home" once in a while to check in.The reason I'm looking for an agent vs agent-less is I don't want to have to poke hole in the local firewalls or have to configure remote access per machine. Just looking to deploy the agent. Spiceworks almost does all this but doesn't have a stable agent yet as far as I know.
View 1 Replies View RelatedWe have some Windows 7 clients that are running the 4.8 agent. NAC will process the user and move them to the trusted vlan. However, the agent stays open and appears to keep running/processing something. THe user can minimize the agent and work normally, and a reboot appears to fix the issue.
View 5 Replies View RelatedI need support on understanding and configuring dhcp relay agent And forwarding. Lets say a bunch of TCP/IP devices required a dhcp ip where it is installed on a perticular server to run so. The server having dhcp pool where it provide the devices with IP addresses as he recieve queries from them requesting to release their addresses. On 2960 switch no dhcp configured and ports assigned under specific vlan under those devices. The issue here, if power goes down and booting process started, the devices started to ask the server for ip add and it takes too much time and somehow it does not take ip and those request kind a dropped. As the minimum requirement is to configure relay agent on the switch and forwarding and multicast?
View 7 Replies View Related