We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.
I have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
I have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
We have 6 brnaches configured with NAC Module in Cisco 2821 ISR router. The WAN link being used to connect all the branch to the HQ CAM is via WIMEX wireless Broadband. The bandwidth is 2MB.OOBVG is the mode used. All branches were working well last 1 year. Last month it is suddently disconnected from the CAM.I opened the TAC. Cisco history of TAC experience, We have total 6 TAC enginners tried one by one still the problem not resolved. The following are the findings
1. Timing is accurate between CAS-CAM 2. Shared secret key correct 3. SSL temp certificate ok also image being used it 4.6.1. 4.Tcpdump from both CAM and shows some initial packet drops of 10 sec with the below CAM log
I believe that NAC is not a matured products and the problem like this even by Cisco TAC can not solve.
i have a problem with some sites! i cant access to them ! some sites are hotmail, this one, and many other! the msg that i see every time is : There is a problem with this website's security certificate. The security certificate presented by this website has expired or is not yet valid.
I'm using NAC 4.8, and I'd like to login using NAC Web Agent on Ipad. When I'm trying to do that, I'm receiving a message on Ipad that I need to install Java Plug-In, but there is no JavaPlug-in available for Ipad. Any additional configuration that I have to do on NAC Manager to be able to access the network using NAC Web Login on Ipad ?
i can configure a requirement type as audit (opposed to mandatory or optional), so the client will still access the network, the user will not be notified, and the information will be sent to the cas.It is possibile to generate an email or similar automated process to notify administrators on these audits?
We have some Windows 7 clients that are running the 4.8 agent. NAC will process the user and move them to the trusted vlan. However, the agent stays open and appears to keep running/processing something. THe user can minimize the agent and work normally, and a reboot appears to fix the issue.
I have a Cisco 7200 acting as the DHCP relay agent on my network. From a security standpoint, I want to disable the bootp server, with 'no ip bootp server'. What bearing, if any, does 'no ip bootp server' have on DHCP activity?
I've got a Cisco 851 running IOS12.3. I'm trying to install a SSL Certificate but after following all the instructions and installing a CA certificate I'm not getting the full chain of authority in a browser just the devices certificate itself. I've repeated the installation process using individual CA certificates all up and down the chain but still the same results.
Is it possible to generate CSR using SH1 instead of md5 on Cisco 1841 for SSL VPN, because the provider that I try to use doesn't accept md5. Also tried to import there private key and got an error "Error: invalid PEM boundary"
I have a SSL certificate from a third party that is showing under the Identity in ADSM, howerver the audit scan of the firewall shows that the SSL Certificate Signed with an unknown certification Authority. I have installed the Intermediate Primary and Secondary Certificate from the third party under the CA Certificate of the ADSM however when I verify the SSL certificate it still shows as self-signed. What other steps do I miss. I have attached some screenshots.
We have the acs server which has the ssl certficate(certifcate authority) running in acs 3.2 windows version for eap-tls enduser authentication.
We want the same to be migrated to acs 4.2(appliance) application. I have tried in different ways to push the certificate but i couldn't.
I have tried Thru System Configuration --> ACS Certificate Setup --> Install ACS certificate --> Download certficate file In that i have mentioned the FTP server IP address, credentials, path and file name
But if i submit the request its giving the directory not found or credentials wrong.
I am attempting to install a third party SSL cert (GoDaddy) to properly secure the external interface of my 1811 ISR so that I can implement SSL VPN. I have tried using SDM 2.5, but that doesn't appear to be working. I am familiar with doing this on a Cisco 3005 Concentrator, but I'm not aware of how to install an intermediate cert on the 1811 (or if it's even possible), in order to properly have the GoDaddy cert properly imported and used for SSL VPN. I have gone through the CSR process and have the initial cert from them generated and have imported it, but it never appears to be identified correctly if I browse to the external interface on the router. The router always defaults to its self-signed cert.
I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). [code]
configuring DHCP on access point, i have cisco 1142N access point, in my network.. working in autonomous mode, i have assigned a static ip to access point with default gateway.. from AP i'm able to reach internet and user connecting to access point are not able to get ip.. i have DHCP server in my network. how to make access point to fetch ip from my dhcp server and assign the saem to client.
I have bought and installed a 2048bit certificate from Thawte on a ACE20-MOD-K9 module. The appliance can't use it and gives the following error: "This certificate cannot be verified up to a trusted certfication authority."I have contacted Thawte about this and they suggest to install an intermediate certificate from Thawte on the module, but I can't find such a certicicate for Cisco on their site. Also I'm not sure how to go about implementing such an intermediate certificate on the ACE.
My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.
There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
%ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?
Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..
Cisco ISE 1.1.1 is given Certificate error while trying to access any of nodes. It is started after adding other nodes in to primary node. Accessing by IP's redirect to other nodes suppose if we accessing primary admin node by IP, it redirect to other nodes (secondary nodes or other nodes).
I need to enable Management access to FWSM using CA ssl certificate.
FWSM Version 3.2(5) in Cisco 6509 switch.
Got to know how to generate, import and export certificate but my query is how to get it applied to the management ip do i need to apply in the management interface.
Just upgraded our WCS server to the 7.x code over the weekend. Turned up the first 3500 series AP's today. The AP's have been up for about an hour. I am seeing the Air Quality graphs on WCS. On the Worst 802.11a/n and 802.11b/g/n Interferers windows, I am see a WCS System Error Page message but only in those windows. I have gone over the documentation and dont see that I need to enable anything else on WCS.
For a Campus setup (University), if I deploy 1142 AP's on all the floors with a WLC controlling them, and put one 3500 AP on each floor, will that give sufficient Clean Air support with automatic Rogue elimination? What about if an AP drops, does the WLC automatically try to cover that area with neighboring AP's? I know the old WLSE would be able to do that, but not sure if the WLC can do that by itself. What part of Self Healing can the WLC do with Clean Air, or is a WCS a must have in order to automatically Defend and self heal? Also is the MSE needed for this if a WCS is used? What does the MSE do that the WLC and WCS can't?
we have this:1x wlc 5508 7.2.1031x cisco prime infrasture physical appliance 1.2And for test of clean air 1x ap 3600 seriesBut i have a question if i would like see bluetooth device in neighborhood. On the cisco web i founded 3355 or virtual appliance.
Hard drive is getting full on LMS 3.2 The only thing this server is running is LMS and Wireshark. What is safe to delete to free up space. Or is there a setting to purge the database so that old data isn't kept for so long.
In the past both of my Dell Laptops running Windows 7 via a router and belonging to HOMEGROUP, have been able to share files back and forth - with the ability to read/write. All of a sudden, one of the laptops (call it #1) was not able to find the shared files of the other laptop (call it #2.) However it worked the other way (#2 could find #1). I did all kinds of research, checked they both still belonged to the Homegroup, sharing was "on", discover network was "on", permissions were "full", etc.
I couldn't get anything to work - when I saw a suggestion that I sign off the Homegroup on both computers, set up a new Homegroup, and try again. I did this and still didn't have any luck - then decided to reboot both laptops.now I have sharing between both computers. BUT - on Computer #1 - the shared folders are like doubled. I have 4 libraries that are shared - Documents, Music, Video, Pictures, and the listed are all the 6 folders that I made sure were set to sharing - but Documents, Pictures, Music, are duplicates of the "library". I'm afraid to change any settings for fear that I'll lose what I finally gained. So my questions is - how can I clean this up so libraries and individual folders are not both shown?
Is there a way to wipe a 515e clean and get ride of the Failover Only license and just have a basic licesne loaded? I got this off of ebay and I guess I missed where it said Failover Only, and I would really like to use it.
