I have been doing a bit of reading on the ACS 4.2 remote agent compatibility with Windows 2008 R2, and it seems like the only way out is to upgrade the ACS to 5.2. We have Cisco ACS 4.2 SE and if I install the Remote agent on a Windows 2003 member server instead of the 2008 R2 DC.
View 3 Replies
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
We have ACS 4.2.0.124 runnning with remote agent installed on win 2003/32 bit ent server. Now we are facing issue like logs (daily backup) from ACS to the Remote Agent is not happening properly. We usually get logs around 1 MB everyday in remote agent but sometimes we are getting 1 KB continuosly untill the services to be restarted in ACS manually.
View 9 Replies View RelatedPresently we are upgrading the existing domain controller to Windows Server 2008, R2 Standard Edition.
I'm bit confound with the information available for the upgrade scenarios. Listed out the present working versions.
Cisco ACS SE - Release 4.1(1) Build 23 Patch 5
Cisco ACS Remote Agent version 4.2(0.124)
As the new operating system is going to work on 64 Bits, I think the existing ACE SE and remote agent may/should be upgraded.
Based on my existing versions, provide the possible upgrade scenarios available for me.After upgrading SE and Remote Agent should be working for 64 bit OS.
The problem is that i had configured the ACS appliance with a remote agent to Integrate with Microsoft active directory and I installed that agent on one of our domain controls and it is working fine.
When I installed another agent on anther domain control and add it to the ACS server it appear that the remote authentication service is working on it but when try to make the new agent the primary and the old one the secondary from External database configuration all the domain users authenticated but only to one group which configured in Unknown User Policy.It appeared like it can't read any more groups from active directory.
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View RelatedACS 4.2 and remote agent was working properly two months before. But in past two months we are facing weird issue in RA server.For Somedays we are missing logs from both ACS and RA server. Once we notice this we use to restart the services in ACS to give workaround. But due to this we loose our daily logs intermittently and facing risk in without having logs.This is not like communication between ACS and RA is not at all happening. It happens properly for a week or month, but again it is going bad without any config change. CSAgent.ini file is properly configured.Full version is 4.2.1.15 and patch is 10 in acs and ra.ACS and Remote Agent Major and Patch version are same.
View 5 Replies View RelatedI'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
Would like to check up either Microsoft SQL Express 2012 is able work with ACS 5.3 remote database?
View 5 Replies View RelatedI want to configure ad agent on windows server 2008 R2 SP1 with all need patch installed.When i try to connect to DC with adacfg dc list, status is UP. Log ADOBserver's don't show any errors. But when try to do command "adacfg cache list", result - empty. In what may be the problem? Perhaps it is related to the language of the OS?
View 4 Replies View RelatedWMP600N is compatible with Windows 2008 Home Server?
View 1 Replies View RelatedI have created a NAC Agent Customization Package and sucsesfully uploaded the 'custom.zip' file to - Policy>Policy Elements>Results>ClientProvisioning>Resources.
However, when I try to edit my Client Provisioning Policy and select AgentCustomizationPackage, my custom package dosn't appear on the drop down list, so i'm unable to select it!
We have a working L2 OOB VG deployment. The NAC agent pops up then says it has granted full access. The issue is about 45 seconds later it pops again then says it has granted full netowrk access. Then it does it again...etc.... The CAM thinks things are fine as it just keeps adding the user to the OUL.
View 4 Replies View RelatedI have two ISE appliances installed in a distributed deployment (primary "ISE1" and secondary "ISE2"), each node has the three personas installed on it. The servers are registered together and the replication is working properly between the nodes.When we are working on the first node everything is fine, if I try to disconnect ISE1 and do my tests on ISE2, the cisco NAC agent doesn't popup, unless I uninstall it and reinstall it again from the ISE2. Then it will work properly.
View 31 Replies View Relatedits been a while since I configured a Cisco firewall (PIX 6.0, SDM) - I've now been thrown in the deep end with a pair of 5525-X's (Latest Software) and I need to achieve the belowWebsense integration (Got this working)AAA Authentication for various outbound traffic routes.I'm using ASDM as I'm more comfortable with the GUI than CLI (I'm the other way round with switches!!!), I have AD Agent configured but the ASA isn't doing anything based on User Name but I have a few other things to try. What I'm trying to achieve now is ignoring certain user names from being matched to IP Addresses as I believe that this may have something to do with it.We use Sophos AV and each PC requires a Service Account to run Sophos under. Each update that Sophos attempts is seen as a login and that is the user attached to the IP Address of the machine. Within Websense, it can be told to ignore certain users for purposes of filtering and reporting etc.. but I dont seem to be able to do this with the AD Agent.
View 3 Replies View RelatedI have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
View 3 Replies View RelatedI have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
I'm somewhat new to ACS and am trying to complete a migration from 4 to 5.3.Currently, I've got ACS joined to my (2003) domain, and it shows status connected (although the test connect fails). I have aaa working without issue for TACACS, but all RADIUS authentication is currently failing. Logs show the message below: "24401 could not establish connection with acs active directory agent"I'm not seeing anything telling in the logs on the domain controllers.
View 1 Replies View Relatedinstalling the Cisco NAC agent through the Active Directory Group Policy. (Windows 2008 R2)Currently Cisco NAC CAS servers has been installed, configured and the switches are added. But the ports are not active. Currently users are not passing through the NAC. When the ports are active and the users trying to access the network, the browser will ask the users to install the Cisco NAC Agent.I need t by pass this by installing the Cisco NAC agent through the active directory Group Policy. How to install the Cisco NAC agent (4.9.1) to all the users in the Network (Windows XP / 7 )through Active Directory so that the users will not know that the Cisco NAC agent has been installed in their computers. By this way the users need not install the Cisco NAC agent through the Web browser and will just login their user name and password and get into the network.
View 1 Replies View RelatedI'd like to deploy ISE on my network and I have two big 4500R switches : a 4510R and a 4507R. A Cisco vendor told me that these last are incompatible with ISE and that I need to buy two 4500E. When I see the price of those products i'm a bit suspiscious, since I've read on that page : [URL]
Device
#Minimum OS Version
#MAB
[Code]....
The only thing is that the minimum RAM for the version 12.2(54)SG1 is not present because it's 64Mb and those models have 32Mb. If I buy RAM and update IOS, will ISE work properly on those devices ?
Is there any way to allow multiple computers to connect to the same remote computer and work simultaneously?
View 3 Replies View RelatedI have configured my WLC 4402 for Radius authentication using Cisco ACS server version 4.2 Patch 4. When using Local Database of ACS my Wireless Users are able to authenticate but users are not able to authenticate from External Database of Windows AD 2008 R1.
In ACS logs I am getting the this error- Authentication session timed out. Challenge not provided by client.
getting a cert off of a 2008 R2 CA and imported correct in to ACS 4.2? I've had and have seen other have the problem with creating a web server certificate from R2 (1024 bit) and putting it in ACS 4.2 only to have HTTPS/SSL no longer work correctly. I haven't even tested the intended purpose of the cert (EAP-TLS) yet, so who knows if that works. I've also seen through searching where some one was able to take a 2003 CA web server template and put it into R2 and it work, but I know longer have 2003 available?
View 1 Replies View RelatedI have a cisco ACS 4.0 build 27 on windows 2003 server . My site was working fine when i was having a AD on 2003 server . Recently i have migrated my AD servers is 2008 .
After the migration the ACS is not authenticating the users . Now i have made a server with 2003 and made the site working . I need a solution to make it work using 2008 server is there any compatiblity issue between ACS 4.0 and 2008 server .
I have installed the Cisco ACS 4.2 in a server running Windows 2003 Server, and this server is member server of the domain. The ACS is working whit a Wireless Platform 4400, and authenticating to the Wireless Users using PEAP and Digital Certificate. But now, the windows platform will be upgraded to Windows 2008. My doubt are the following:
1. The ACS running in a windows 2003 server, will authentificate users in the new windows 2008 domain?
2. At the beginning, the ACS and the Windows domain was 2003. Now whit the change of the version of windows domain, What happens whit the configuration of the acs server as member server? I need reconfigure the member server configuration in the ACS Server?
I have an ACS 5.1 and am trying to integrate with windows 2008 R1. The ACS has a valid AD account and indicates that its connected but when I try to list any directory groups my windows IE browser hangs?
View 2 Replies View RelatedRecently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
We are still running ACS 4.1 on Window 2003 server. We recently upgraded AD to 2008 although the domain and forest functional level are still 2003. After AD upgrade we now unable to authenticate via ACS Windows Database.
View 13 Replies View RelatedI just setup ACS 4.2 on windows 2008 standard server. I noticed that after a while, i could not launch the ACS from desktop. All services are up, i have restarted server a couple of times....The Program appears to launch and the disappears..
View 2 Replies View RelatedIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedI planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
ACS 5.2 , and I can't find document about how to configure remote access vpn authentication in ACS 5.2.
View 6 Replies View RelatedI have configured the appliance everything is working fine.We have a remote syslog server and I have configured the remote syslog server details in the "Remote Log Targets" and and Logging Categories.But I cannot see any logs on my syslog server
View 4 Replies View Related
