Cisco AAA/Identity/Nac :: ACS 5.3 Remote Database Compatibility?
May 26, 2013Would like to check up either Microsoft SQL Express 2012 is able work with ACS 5.3 remote database?
View 5 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: ACS 1121 / 5.3 - Remote Database Settings In Monitoring And Reporting
Mar 26, 2012I am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
Cisco AAA/Identity/Nac :: ACS 4.2 Remote Agent Compatibility (2008 R2 DC)?
May 7, 2012I have been doing a bit of reading on the ACS 4.2 remote agent compatibility with Windows 2008 R2, and it seems like the only way out is to upgrade the ACS to 5.2. We have Cisco ACS 4.2 SE and if I install the Remote agent on a Windows 2003 member server instead of the 2008 R2 DC.
View 3 Replies View RelatedMethod Of Remote Database Share / Access
Feb 21, 2011what is the easiest method permitting a local and a remote pc to access the same database ? They both have internet access.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 To ACS 5.4 Database Replication
May 27, 2013I would like to know if its possible setup database replication from Cisco ACS 4.2 server to ACS 5.4 server ?
View 3 Replies View RelatedAAA/Identity/Nac :: Local Database Of Pix 525?
Feb 18, 2013i configured pix 525 for easy vpn. About 100 to 200 people will use this service. i dont have much knowledge about radius and tacacas servers. Is local data base enough for extended authentication or should i configure the server for it ?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2.1 Authentication And Database Replication?
Mar 27, 2011Firstly the ACS 4.2.1 for Windows database replication does any one have and documentation on the processes required?Secondly I have a single system installed which is providing TACACS authentication for management access to a Cisco 5508 WLC, the controller prompts with a login box on connection to the web interface. When you put in the username and password pair the box comes back as if the authentication has failed. On the ACS I was unable to see any failed authentications so enabled passed authentication reporting and can see the user passing the process. The WLC is running software version 6.0.199.4. On the ACS I have added the extra two options within the TACACS interface configuration and have a ‘role1=all’ against both the user and the group the user is part of so I am confused as to why the user is still denied access.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.0.0.21 Monitoring And Reports Database?
Jun 16, 2010Just installed ACS 5.0.0.21. Monitoring and reports database was working, but now is not. When trying to open, I get "Monitoring and reports database currently unavailable. Trying reconnect in 5 minutes." From CLI "sho application status acs" gives me the following:
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'adclient' runningProcess 'view-database' runningProcess 'view-collector' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' running
Also, logs show nothing unusual.
Cisco AAA/Identity/Nac :: Database Is Not Lost On Primary ACS 5.1
Apr 23, 2013We have recently upgraded acs 5.1 to 5.3 ( normal upgrade process), all secondary (ACS-B) was deregistered from primary (ACS-A , used as configuration server and log collector) and updated successfully. But while upgrading primary acs server was rebooted manually. But later primary server was re upgraded successfully to 5.3.
Just to ensure database is not lost on primary acs (ACS-A) , primary acs was registered to one of the secondary acs (ACS-B). Initially ACS-A registered with ACS-B, both ACS was showing proper role now. ACS-A ( secondary ) and ACS-B (primary). But on New primary ACS (ACS-B) is showing new secondary (ACS-A) offline and replication pending. Whereas on Secondary ACS-B its shows primary ACS-A online and updated. But ACS replication id is gradually incrementing. ACS system is in this system for last 2 day, But not sure if there is real replication happening at backend? How long it take place to replicate completely? and how to check / verify status of upgrade?
Cisco AAA/Identity/Nac :: ACS 5.2 Database Failure Radius Accounting?
Jul 31, 2012on the dashboard of the "Monitoring & Report Viewer" I see a lot of system alarms related to the database.The explanation of the alarm says to look at the Collector logs for the details.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 To Use Local Database When LDAP Fails
Mar 22, 2011i'm trying to configure acs 5.2 to LDAP external idenity store, when LDAP failes ACS 5.2 should use internal indenity store. I configured A sequence to use LDAP 1st then Internal and i shut off the link to the LDAP but ACS will not use internal, AAA Diagnostics keeps telling me that Cannot establish connection with LDAP server and will not use the internal store.
View 7 Replies View RelatedCisco AAA/Identity/Nac :: LDAP Or AD For External Database - Secure ACS 5.2
Sep 27, 2012I am working on project with Secure ACS 5.2. I am trying to determine the proper External Database to use. LDAP or direct to AD?
Additionally, the Domain that I am connecting to has Multiple sub domains. All of the users are currently in the Sub domains, but will be moving to root domain later. How should I configure the connection, do I need to connec to each sub domain or can I just connect to the root?
Cisco AAA/Identity/Nac :: ACS 5.1 Updating Internal User Database?
Jul 4, 2011Using a CSV file, I can not add user in the internal database of the ACS I have a permanent "error File Format Validation Failed" However the file I want to import is a really CSV file.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Type Of ACS V4.2 Database Password Hash?
Jan 17, 2012What's type of ACS v4.2 Database password hash?
example:
-------------------------------------------------
Name : ###postureuser
Password : 0x0020 fe fc f0 11 24 dc dd bd 0f d9 78 56 b8 4a fc f4 40 d0 bd 1d 19 5b 56 7e 14 f0 4e 1a b0 83 66 24
Chap password : 0x000e 22 07 e4 28 c0 09 7f 1a b7 e6 2a 78 a1 52
-------------------------------------------------
Cisco AAA/Identity/Nac :: ACS 5.2 System Alarm Database Purging
Apr 19, 2012On Cisco ACS 5.2.0.26 Patch 10, I got this system alarm:Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will be useful to avoid disk space issues. View database Size is 2.92GB and size it occupies on the harddisk is 2.91GB
In "Monitoring Configuration > System Operations > Data Management > Removal and Backup", we got this information:
Database Purging:If database size exceeds 120 GB, a backup (if configured) and purge will be initiated. If database size exceeds 150 GB, a purge will be initiated.
Could View database size reach 120 GB ?I want to know how long will Cisco ACS works without problem and if I need to hurry to configure purge.
AAA/Identity/Nac :: ACS5 Try To Authenticate User In External Database
Jan 16, 2012Is it possible to create on ACS5 rule which will:
1. Try to authenticate user in external database1 (radius)
2. When external database1 returns FAIL (because of bad password) ACS5 should try to authenticate user in another external database2 (radius)
AAA/Identity/Nac :: CSACSE-1113-K9 / ACS 4.2.1.15 External User Database
Mar 9, 2012Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies View RelatedAAA/Identity/Nac :: Windows ACS 4.2.0 Backup Database On 1120 Appliance 4.2.1.15?
Apr 26, 2011I am running windows based acs 3.3 in my lan environment going to be replaced with acs 1120 appliance running acs 4.2.1.15 , ACS 3.3 database has been built upto 4.2.0.124 ,step by step by upgrade process
1) acs 3.3.3.14---> 4.1.1.24
2) acs 4.1.1.24 ----> 4.2.0.124 .
now my database is with 4.2.0.124 dmp file , I cannot upgrade my database to 4.2.1.15 because 4.2.1.15 patch is not applicable & executable on 90 days evalution package of 4.2.0.124 of windows platform .
can i import my windows based 4.2.0.124 datbase directly to my acs appliance running 4.2.1.15.3 ??? , else its requires any step to be done to modify the windows based databse matching to appliance windows verison once .
I could see on appliance under restore settings the following options (restore from 4.2.0 backup file to acs 4.2.1)
Cisco AAA/Identity/Nac :: N5000 Same User In Tacacs / Local Database With Different Privilege
May 15, 2012i am running NX-OS image n5000-uk9.5.1.3.N1.1.bin on the nexus 5020 platform.i have configured authorization with tacacs+ on ACS server version 5.2 with fall back to switch local database.a user test with priv 15 is craeted on ACS server, password test2 everything works fine, until i create the same username on the local database with privilege 0. ( it doesnt matter if the user in local database was created before user in ACS or after ) e.g.: username test password test1 role priv-0 (note passwords are different for users in both databases)
after i create the same user in local database with privilege 0,if i try to connect to the switch with this username test and password defined on ACS, i get only privilege 0 authorization, regardless, that ACS server is up and it should be primary way to authenticate and authorizate the user.
Cisco AAA/Identity/Nac :: ASA 5510 / SSH Local Database Username And Password Not Working?
Feb 28, 2012I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
Site-ASA# sh run | in ssh
aaa authentication ssh console SERVER_RADIUS LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
[code]....
Cisco AAA/Identity/Nac :: ISE Compatibility With 4500R?
May 28, 2013I'd like to deploy ISE on my network and I have two big 4500R switches : a 4510R and a 4507R. A Cisco vendor told me that these last are incompatible with ISE and that I need to buy two 4500E. When I see the price of those products i'm a bit suspiscious, since I've read on that page : [URL]
Device
#Minimum OS Version
#MAB
[Code]....
The only thing is that the minimum RAM for the version 12.2(54)SG1 is not present because it's 64Mb and those models have 32Mb. If I buy RAM and update IOS, will ISE work properly on those devices ?
Cisco AAA/Identity/Nac :: Remote Agent With ACS 4.2
Mar 18, 2013We have ACS 4.2.0.124 runnning with remote agent installed on win 2003/32 bit ent server. Now we are facing issue like logs (daily backup) from ACS to the Remote Agent is not happening properly. We usually get logs around 1 MB everyday in remote agent but sometimes we are getting 1 KB continuosly untill the services to be restarted in ACS manually.
View 9 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 And 8.2 Remote Access VPN Configuration
Feb 11, 2012ACS 5.2 , and I can't find document about how to configure remote access vpn authentication in ACS 5.2.
View 6 Replies View RelatedCisco AAA/Identity/Nac :: 1120 ACS 5 - Remote Log Targets?
Mar 19, 2012I have configured the appliance everything is working fine.We have a remote syslog server and I have configured the remote syslog server details in the "Remote Log Targets" and and Logging Categories.But I cannot see any logs on my syslog server
View 4 Replies View RelatedCisco AAA/Identity/Nac :: Upgrading ACS 4.1 SE And Remote Agent
Mar 20, 2012Presently we are upgrading the existing domain controller to Windows Server 2008, R2 Standard Edition.
I'm bit confound with the information available for the upgrade scenarios. Listed out the present working versions.
Cisco ACS SE - Release 4.1(1) Build 23 Patch 5
Cisco ACS Remote Agent version 4.2(0.124)
As the new operating system is going to work on 64 Bits, I think the existing ACE SE and remote agent may/should be upgraded.
Based on my existing versions, provide the possible upgrade scenarios available for me.After upgrading SE and Remote Agent should be working for 64 bit OS.
AAA/Identity/Nac :: ASA5510 With 2 Remote Access VPN And 2 MS IAS
Jun 17, 2011We have a Cisco 5510 with 2 IPSec Connection Profiles each using a different IAS for authentication.If we add another VPN profile we need another IAS.With Cisco ACS can it be configured for different VPN profiles from the same ASA 5510?
View 4 Replies View RelatedCisco AAA/Identity/Nac :: Remote Agent For ACS For Windows 2008 R2 64-bit?
Jul 17, 2012We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
[code]...
Cisco AAA/Identity/Nac :: Windows Remote Agent For ACS 4.2 Appliance?
Jun 7, 2011The problem is that i had configured the ACS appliance with a remote agent to Integrate with Microsoft active directory and I installed that agent on one of our domain controls and it is working fine.
When I installed another agent on anther domain control and add it to the ACS server it appear that the remote authentication service is working on it but when try to make the new agent the primary and the old one the secondary from External database configuration all the domain users authenticated but only to one group which configured in Unknown User Policy.It appeared like it can't read any more groups from active directory.
Cisco AAA/Identity/Nac :: ACS Remote Agent 4.2.1 On VMWare Server?
Jul 17, 2011it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View RelatedAAA/Identity/Nac :: ACS 5.2 - Unable To Delete Remote Log Target?
Oct 12, 2011I have two ACS 5.2 running as primary and secondary instances respectively. When I try to delete a remote log target under System Administration > ... > Configuration > Log Configuration > Remote Log Targets I get the following error message...."The item you trying to delete is referenced by other items. You must remove all references to this item before it can be deleted".
I have searched the configuration within the web gui and was unable to find anything that reference the object that I'm trying to delete.
Cisco AAA/Identity/Nac :: ASA 5510 - Remote Access To Network When Server Is Down
Jan 2, 2013I have a Cisco ASA 5510. I have configured Cisco Anyconnect to authenticate via Windows IAS. We had an outage of that server recently and I tried to remote in via anyconnect and could not. Once the IAS server came up I could get back into the network.
Is there a command that I'm missing that will let me use Anyconnect to connect into the network even if my AAA server is down?
Cisco AAA/Identity/Nac :: ACS 4.2 / Logs Are Lost Frequently In Remote Agent Server
May 2, 2013ACS 4.2 and remote agent was working properly two months before. But in past two months we are facing weird issue in RA server.For Somedays we are missing logs from both ACS and RA server. Once we notice this we use to restart the services in ACS to give workaround. But due to this we loose our daily logs intermittently and facing risk in without having logs.This is not like communication between ACS and RA is not at all happening. It happens properly for a week or month, but again it is going bad without any config change. CSAgent.ini file is properly configured.Full version is 4.2.1.15 and patch is 10 in acs and ra.ACS and Remote Agent Major and Patch version are same.
View 5 Replies View RelatedCisco AAA/Identity/Nac :: Use ACS 5.2 To Create Static IP Address User For Remote Access VPN
Sep 17, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?