i configured a new ASR1002 router yesterday,i powerd on the ASR1002 to check the device include some SPA moduler,but i found my console screen display like this""Warning: filesystem is not clean"and "%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash contained errors which were auto-corrected."while ASR1002 power on.
View 4 Replies
A few moments ago we noticed the following on one of our Nexus 7K devices. Google didn't deliver much as to what might have gone amiss. [code]
View 2 Replies View Relatedused to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies View RelatedI'm running web server on Linux Redhat when i run
# /etc/init.d/tomcat status
I got a number of lines:
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
Tomcat running in normal mode Also , I can see that Tomcat unstability makes some strange behaviour in the system overall.
What does this message mean? Jan 24 11:17:45 DIR-655 user.warn kernel: [175630.020000] Inteference detected.
View 4 Replies View RelatedI'm configuring the nat on a ASA5525 running on 9.1.2 and got 2 questions, 1. Is the below overlap warning message normal and will not cause any issue? 2. Is there a simple way on 8.3 and later to fulfill the same functionality like 8.2 and earlier?
old config on 8.2 and earlier
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (dmz) 1 0.0.0.0 0.0.0.0 0 0
global (outside) 1 216.19.84.5
[code]....
We are using ACS 5.1 and from time to time we are getting a warning saying that the active sessions are over the limit (250000). It is just a warning, so my assumption is that its not a big deal, but how do we keep from getting the event, or prevent the event?
View 2 Replies View RelatedStartSSL offers free SSL certificates, so I'm guessing that means no Warning messages from browsers IE,Chrome,firefox atleast? Has anybody used this StartSSL certificate lvl1 is free..I'd tryed this myself but my hosting company is charging twice more for having ssl(just having it not even buying) than for hosting my website.
View 1 Replies View RelatedUsing Windows 7 Pro. I get a yellow triangle with ! on the LAN icon. The message is : 'no internet access' but the internet works.On Network and sharing center, using work network, everything is ok.It doesn't happen all the time.
View 4 Replies View RelatedI just deployed two stacked SG500X switches. I noticed these messages in the log (see below). Despite these messages everything appears to be functioning.
21474818342013-Jan-25 11:41:17Warning%Stack-W-LINK DOWN: link 0 on unit-2, aggregated (369)
21474818352013-Jan-25 11:41:17Informational%Stack-I-LINK UP: link 0 on unit-2, aggregated (369)
21474818362013-Jan-25 11:37:25Warning%STCK SYSL-W-UNITMSG: UNIT ID 2,Msg:%Stack-W-LINK DOWN: link 0 on unit-2, aggregated (1)
21474818372013-Jan-25 11:37:25Warning%Stack-W-LINK DOWN: link 0 on unit-2
21474818382013-Jan-25 11:37:25Informational%Stack-I-LINK UP: link 0 on unit-2
[Code]....
I've been getting warning messages from the event log of a 1300 series bridge, which is set as an Access Point in the network, states: 'Packet to client (mac address) reached max retries, removing the client'; I'm not sure why the client is removed. Does 'reached max retries' mean that the client has tried to many times to connect to the AP/Bridge?
View 1 Replies View Relatedi am able to connect to unsecured wireless networks but when i connect alll of them say no internet access i only notice a yellow warning sign beside those signal strength bars also and not on secured one !
View 2 Replies View RelatedOn connecting VPN, i am getting this warning: Enabling VPN connection will block all traffic that doesn't get sent to this peer. After Yes, it stops all browsing. I want to access internet plus vpn connection.
View 4 Replies View RelatedI am facing problem with 7600-ES+20G3C card / Any system reset will change the system operating mode
View 2 Replies View RelatedJust upgraded our WCS server to the 7.x code over the weekend. Turned up the first 3500 series AP's today. The AP's have been up for about an hour. I am seeing the Air Quality graphs on WCS. On the Worst 802.11a/n and 802.11b/g/n Interferers windows, I am see a WCS System Error Page message but only in those windows. I have gone over the documentation and dont see that I need to enable anything else on WCS.
View 10 Replies View RelatedFor a Campus setup (University), if I deploy 1142 AP's on all the floors with a WLC controlling them, and put one 3500 AP on each floor, will that give sufficient Clean Air support with automatic Rogue elimination? What about if an AP drops, does the WLC automatically try to cover that area with neighboring AP's? I know the old WLSE would be able to do that, but not sure if the WLC can do that by itself. What part of Self Healing can the WLC do with Clean Air, or is a WCS a must have in order to automatically Defend and self heal? Also is the MSE needed for this if a WCS is used? What does the MSE do that the WLC and WCS can't?
View 4 Replies View Relatedproperly patching and/or cleaning the ACS version listed in the title.
First off - what does the Cleaning utility do?
Second - I have obtained the two following files:
ACS-4.2.0.124.17-SW
ACS-4.2.0.124.16-Clean
Can these both be used to correct a problem we have with our current installation?
we have this:1x wlc 5508 7.2.1031x cisco prime infrasture physical appliance 1.2And for test of clean air 1x ap 3600 seriesBut i have a question if i would like see bluetooth device in neighborhood. On the cisco web i founded 3355 or virtual appliance.
View 1 Replies View RelatedHard drive is getting full on LMS 3.2 The only thing this server is running is LMS and Wireshark. What is safe to delete to free up space. Or is there a setting to purge the database so that old data isn't kept for so long.
View 1 Replies View RelatedIn the past both of my Dell Laptops running Windows 7 via a router and belonging to HOMEGROUP, have been able to share files back and forth - with the ability to read/write. All of a sudden, one of the laptops (call it #1) was not able to find the shared files of the other laptop (call it #2.) However it worked the other way (#2 could find #1). I did all kinds of research, checked they both still belonged to the Homegroup, sharing was "on", discover network was "on", permissions were "full", etc.
I couldn't get anything to work - when I saw a suggestion that I sign off the Homegroup on both computers, set up a new Homegroup, and try again. I did this and still didn't have any luck - then decided to reboot both laptops.now I have sharing between both computers. BUT - on Computer #1 - the shared folders are like doubled. I have 4 libraries that are shared - Documents, Music, Video, Pictures, and the listed are all the 6 folders that I made sure were set to sharing - but Documents, Pictures, Music, are duplicates of the "library". I'm afraid to change any settings for fear that I'll lose what I finally gained. So my questions is - how can I clean this up so libraries and individual folders are not both shown?
I have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerberos)" option on the NAM.Then, the ADSSO service start on the NAS.I modify the local policy according to the guide allowing all encryption except the one for future use.Then the NAC client say "User unknown" contact your network administrator.
View 3 Replies View RelatedIs there a way to wipe a 515e clean and get ride of the Failover Only license and just have a basic licesne loaded? I got this off of ebay and I guess I missed where it said Failover Only, and I would really like to use it.
View 2 Replies View RelatedJust had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led. The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?
View 5 Replies View RelatedI have two NAC appliances version 4.8.2, one Manager and one Server, I want to know if the “nacagentsetup-win-4.8.2.1.tar.gz” software exists in my appliance or it’s CD or not? Should I download it?
When my client wants to download the software by clicking on “download Clean Access Agent 4.8.2” button this error appears “Failed to download (states=-2)”. I guess I should upload the software first but I don’t know how or where it is?
We have NAC 4.0.5 and windows active directory domain the clients log on to the client to access the network with their domain credentials and they used to get the "Certificate is issued from an untrusted." until I installed the url.. certificate to the local certificate store.
I seem to have done something on the NAC manager that messed up something, cause now the client considers the certificate issued from a trusted source, BUT a warning stating that the name on the certificate does not match the name.
I have a dual 5508 controller /NCS deployment. I deployed my first clean air AP today, a 3502I.
The Clean Air feature does not seem to work, however. "No information is available because CleanAir is disabled or otherwise not available for this radio. If no information is available and CleanAir is enabled then you can try rebooting the AP XXXX".The thing is that CleanAir is enabled on this AP.
getting the iPad to work with Clean Access? Currently running v4.7.2 NAC.
View 6 Replies View RelatedI am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
Purchased a used Cisco 2821 Router and would like to remove all unnecessary files and folders.
My concern is a hacked Rommon or IOS, is there a way to determine this?
Is there a list of directories, files and folders of all of the necessary system folders so I can know what i can delete?
We have installed a number of Cisco Wireless 3502-07 in China and i can not get the Clean Air Oper status to change to UP. At the meoment i have ERROR. I have have tried to disable and enable the the Clean Admin Status from the Access Point 802.11b/g/n and then select the AP and change configuration.
View 2 Replies View RelatedI've just installed a clean Windows 7 Ultimate on a brand new Acer Aspire 5750.The lan nor wireless didn't work out of the box. After installing the Gigabit lan drivers it found the network card But it can't find the wireless. When I try to install the Wireless drivers from: [url]It's the Atheros card I have. So when I try to install the Wireless Lan Atheros drivers it sais:"The device doesn't exist. Please plug the device back in and try again" What do I do now? It's a laptop, I can't exactly remove the network card.
View 1 Replies View RelatedI have an Inspiron 6400 XP SP3 Intel PROset/wireless Wi Fi
Belkin Wireless G Router (supplied by Dell with the laptop)
I had to do a clean install of the laptop. Until then good connection no problems BUT since the clean install I am experinecing intermitant problems Wifi connecting to the router. The wireless finds the router without fail but won't always connect. When is doesn't, a reboot makes no difference but power cycling the router always works. After hours of strong connectivity the connection drops out unpredicatbly.
I have tried updateing the driver for the wifi NIC and the Proset software direct from intel which seems to make no difference.
I have a 2500 and I have successfully joined a 1600 AP to it; however I have noticed that I cannot enable CleanAir in the Global Parameters with just the 1602 AP joined. This feature was enable when I had my 2602 AP connected.So, is the problem that the 1602 doesn't fully support CleanAir? If that is the case, how do I enable CleanAir Express or is that something you can even enable thru the GUI?
View 9 Replies View Related
