Using Windows 7 Pro. I get a yellow triangle with ! on the LAN icon. The message is : 'no internet access' but the internet works.On Network and sharing center, using work network, everything is ok.It doesn't happen all the time.
View 4 RepliesAt random times the network cable is apparently unplugged but then it reconnects and then I cant receive anything.I disconnect the LAN then reconnect and then it works again. This is on a winXp computer.
View 16 Replies View RelatedMy internet connection works for 5 minutes and then stops .. works again for 5 minutes and then stops..... I'm using windows 7.
View 1 Replies View RelatedI'm trying to connect my desktop to my laptop over the WLAN. Both computers are connected to the router, as well as I've got no problems sharing files to my PS3 via media servers. But connecting the two computers is impossible. I've tried everything I can think of. I've tried connecting the two both using Homegroup services, and in the old fashion way, without the Homegroup service, using only IPv4.It seems like firewall settings and sharing in general works ok, but making it work over WLAN is very troublesome.
View 2 Replies View Relatedmy internet only works in safe mode with networking but outside of safe mode i dosent work and i cant use the internet as i have seen in other cases they asked for a hijackthis scan so i done one and ask if you wish
View 1 Replies View RelatedWorked fine and then all of a sudden the Internet didn't work anymore. So I ran the computer in safe mode and it works fine, but still no luck in regular mode. Ran worm removal and spybot but nothing has worked. Also the windows bar is missing now for some reason. Windows Xp Service Pack 3.
View 9 Replies View RelatedOn connecting VPN, i am getting this warning: Enabling VPN connection will block all traffic that doesn't get sent to this peer. After Yes, it stops all browsing. I want to access internet plus vpn connection.
View 4 Replies View RelatedI moved to a new place, with a new internet provider (a dorm, so it's all public). In my old place, my PC worked fine (Windows XP), but now it fails to connect to any of the Browsers. My laptop (Windows 7) is fine though with the same cable. No problems at all.
View 9 Replies View RelatedI'm visiting my mom for the holidays and so of course I got roped into her tech problems. She has an emachine with windows 7 that won't browse the internet even though it appears to be connected. The internet works fine in safe mode. She didn't have any antivirus software (in fact, she doesn't have that many programs at all) so I downloaded malware bytes and the scan came back clean.She has Hughesnet (the satellite people) as her ISP and she says that the problem started after they upgraded her modem.I'm a bit stumped as to what the problem could be, since all the google searches I did on the topic seemed to be some kind of problem with antivirus software (having two conflicting, or some kind of wonky settings) or a virus, neither of which seems to be the case.
View 1 Replies View RelatedI have a Windows 7 HP with intel pentium my Internet only works in safemode with networking. Orignially it worked when I used internet explore 64-bit but eventually that stopped working as well. I have 3 accounts on this computer and I need safemode with networking for all of them. I do have both mcfee and norton anti virus i was told that may be the problem however, I do not know how to install either of them.
View 14 Replies View RelatedI just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies View RelatedI have a computer connected by ethernet to a netgear router. >Today it has decided it doesn't want to connect to the internet.When I try to connect it justs tells me it can't find the server.
View 6 Replies View Relatedi am able to connect to unsecured wireless networks but when i connect alll of them say no internet access i only notice a yellow warning sign beside those signal strength bars also and not on secured one !
View 2 Replies View RelatedMy family and I received a Sony Vaio computer as a gift, but for some strange reason the internet only seems to work in safemode.
View 12 Replies View RelatedI am unable to connect to the internet unless in safe mode. If I disable my firewall in normal mode I can connect but it seems a bit slow. I have used Hijackthis and it gave me a log file which I can paste if needed. To analyse this tool has not highlighted anything that is dangerous. Why I can't connect to the internet?
View 3 Replies View RelatedWe have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies View RelatedThe wireless network never picks up any signals and when I try to plug in to the modem it doesn't recognize the internet either. Is this a driver issue or what?
View 1 Replies View RelatedHad talk talk router upgrade yesterday and everything worked fine. Today wifi works on MacBook but not on PC Windows xp3. It appears in the list but won't connect on pc. Can connect to an unsecure weak connection on the list but it's not mine. Been in to router to chnage channel from auto to 11 as an eg
View 2 Replies View RelatedWindows XP Wireless works slow.
View 2 Replies View RelatedI moved to a new house last week, and i have comcast internet which works on cable lines.i have them for years. anyways, i got my own motorola sb5101 modem, which i use for a while now.the problem is that in the new house the modem only works when it is connected to a computer with windows xp, it DOES NOT work on windows vista or 7,also, when i connect my router into it, it does not work either.when i connect it to windows 7 64-bit, it says "unidentified network" and "no internet access" but it works perfectly fine on windows xp 32 bit. (i have 2 xp's and 3 windows 7's)
View 5 Replies View RelatedI can only connect to the development server when I am logged into the VPN (Cisco VPN)I do most of my work on my desktop, which is running XP sp3. While logged into the vpn there, I can reach the SVN and FTP servers fine, but I cannot connect to the development website to view anything.I also have a laptop that is running windows 7. When I connect to VPN on that, I can connect to the website just fine. It is all from within my house so using the same router / cable modem / internet service. Both have installed the latest Cisco VPN softare, and use the same profile to connect.The differences are, windows 7 vs Windows XP. Windows 7 is running Microsoft Security Essentials and XP is running Comodo.
However, even when I turn off Comodo on XP I still can't connect to the website. (Just FYI, I also have XP as dual boot on the laptop and tried connecting from it but no go). I am getting absolutely no assistance from the company I am working on, so really can't ask them anything, I guess it is something I have to figure out myself.But it is frustrating me. I prefer to work on my desktop and it is set up in with all my development tools etc in a nice environment, where the laptop is noisy and slow and not a preferred work place.
I have a shared laptop that allow some to connect to the wireless network while it will not let one person to.
View 1 Replies View RelatedWe have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well. Which versions of Window can perform best with CiscoWorks. E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1
View 2 Replies View RelatedI'm running Windows Vista on a Dell Laptop. Normally I just use wireless wherever I am but now I need to hard wire to the computer. It was initially working for a few minutes but then the connection dropped. Now whenever I plug the cable in, it shows it as being connected but comes up as local only so I can't browse or do anything.
I have tried:
-Restarting the machine
-Ensuring that windows was picking up the IP addresses automatically
-Checking the connection on another computer, works fine.
-Disabling the IpV6
-Disabling/Enabling the LAN connection in the Manage network connections setup
-Uninstalling, re installing the driver for the ethernet adapter
-System Restore
I've also tried in safe mode with networking and have disabled any firewalls that were running.Again, most of the time I never use the hard wired connection, but whenever I have, it hasn't had any problems until now.It always comes up as being connected, but says local only.
Here's the results from the Ipconfig:
Windows IP Configuration
Host Name . . . . . . . . . . . . : a-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
used to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies View RelatedI'm running web server on Linux Redhat when i run
# /etc/init.d/tomcat status
I got a number of lines:
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
Tomcat running in normal mode Also , I can see that Tomcat unstability makes some strange behaviour in the system overall.
I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Currently automatic metric on all adapters.LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top.Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41.
Netstat shows LAN then USB. ipconfig shows LAN then USB.But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection.I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table.Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic)Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less))For some reason restarting USB is resetting LAN setting when reconnected.
What does this message mean? Jan 24 11:17:45 DIR-655 user.warn kernel: [175630.020000] Inteference detected.
View 4 Replies View RelatedI newly installed win 7 in 2 pc's. I had used the internet connection sharing when I had Win xp installed in them before. So I gave the static IP address,192.168.0.1 to the pc with the internet connection, and had the other pc obtained the IP address automatically. File sharing works fine, but somehow the 2nd PC could not be connected to the internet. When I checked its connection details, the Autoconfiguration IPv4 Address was 169.254.224.63. I think this IP address should be something like 192.168.0.xxx, but it's configured to auto, so I can't really do anything right now
View 1 Replies View RelatedToshiba Portege, I have tried downloading their DriverTuner.exe and transfering it via Flash drive but it comes up with "Entry Point not found".
View 1 Replies View Relatedmy win 7 desktop always disconnect from internet connection after it has been connected and i ran network diagnosis wizard it was saying DNS ERROR CONNECTION. All other systems in my office use the same dns address.
View 3 Replies View Relatednew laptop running windows 7 home premium? i connect to the internet using mobile broadband device which works fine but i have been trying for a week now to share that connect with my local area network connection to access my ps3 (as i did with xp) to no success. 1st the LAN states that is is an "unidentified network: so when i tried to set up internet connection sharing, it would say that the wimax network adapter was "shared" but there would be no internet or network access though LAN. now i cannot even start ics as i am getting an error message that states "an error occurred while Internet Connection Settings was being enabled (null)..
View 2 Replies View RelatedI ran an xp computer for a long time, in WoW i had a latency of around 100-120 which wasnt that bad. Now I built a computer with Win7(64bit) and the latency varies from around 250-370ms.
View 6 Replies View Related