Cisco VPN Not Connecting To Websites On XP But Works In Windows 7
Nov 10, 2011
I can only connect to the development server when I am logged into the VPN (Cisco VPN)I do most of my work on my desktop, which is running XP sp3. While logged into the vpn there, I can reach the SVN and FTP servers fine, but I cannot connect to the development website to view anything.I also have a laptop that is running windows 7. When I connect to VPN on that, I can connect to the website just fine. It is all from within my house so using the same router / cable modem / internet service. Both have installed the latest Cisco VPN softare, and use the same profile to connect.The differences are, windows 7 vs Windows XP. Windows 7 is running Microsoft Security Essentials and XP is running Comodo.
However, even when I turn off Comodo on XP I still can't connect to the website. (Just FYI, I also have XP as dual boot on the laptop and tried connecting from it but no go). I am getting absolutely no assistance from the company I am working on, so really can't ask them anything, I guess it is something I have to figure out myself.But it is frustrating me. I prefer to work on my desktop and it is set up in with all my development tools etc in a nice environment, where the laptop is noisy and slow and not a preferred work place.
I've been having a really annoying issue with my computer not connecting to the internet wirelessly I start the computer, and a connection is there via my router for about 30secs-2mins. After this, I can't access any websites. The full five bars remain white and the router is still seen by the computer, but there is a small yellow exclamation sign in front of it, and a mouse-over says "no internet access". I can still access when wired to the router through a cable, so I thought it might be an issue with my wireless card, but wireless USB adapters don't make a difference, even when I've disabled the wireless card. My drivers are all up to date, and I've even tried a full reformat and reinstall of Windows 7, to no avail. Other devices (a couple of computers and phones) can connect to the router fine, and the network even tried a new router, with no success. I have experienced this immediately after the reinstall, before either firewall (I use ZoneAlarm Free) or AV (I use Avast! Free) were installed, and I'm completely stuck.
- Cisco 1841 connected to the internet on fa0/1 - LAN connected to fa0/0/1 (switch port, connected to Vlan1)
On my LAN I have a web server that houses different websites. Those websites have DNS records that point to my public IP address, located on fa0/1. From the outside I can reach the websites perfectly, but I can't reach them from the inside. So it looks like I can't seem to connect from my local LAN address to the public ip address on the Cisco (who then should NAT it to the correct server)
Here is a snippet from my config:
--NAT-- ip nat inside source static tcp 192.168.0.3 80 interface FastEthernet0/1 80 ip nat inside source route-map Internet interface FastEthernet0/1 overload
--OUTSIDE INTERFACE-- interface FastEthernet0/1 description WAN ip address dhcp ip access-group WAN-IN in [ code]...
--INSIDE INTERFACE-- interface Vlan1 description LAN ip address 192.168.0.254 255.255.255.0 ip access-group LAN-IN in [Code]....
Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
A few days back I have changed the modem (don't know the previous model no) because of some issues. Since then I am not able to open most of the websites in Firefox, IE6/8, chrome, opera. If i connect with other network like reliance data card, those websites are opening, if i connect bsnl the problem will be same again. I called to customer care many times, but no use.
Had talk talk router upgrade yesterday and everything worked fine. Today wifi works on MacBook but not on PC Windows xp3. It appears in the list but won't connect on pc. Can connect to an unsecure weak connection on the list but it's not mine. Been in to router to chnage channel from auto to 11 as an eg
We have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well. Which versions of Window can perform best with CiscoWorks. E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1
my internet only works in safe mode with networking but outside of safe mode i dosent work and i cant use the internet as i have seen in other cases they asked for a hijackthis scan so i done one and ask if you wish
At random times the network cable is apparently unplugged but then it reconnects and then I cant receive anything.I disconnect the LAN then reconnect and then it works again. This is on a winXp computer.
Worked fine and then all of a sudden the Internet didn't work anymore. So I ran the computer in safe mode and it works fine, but still no luck in regular mode. Ran worm removal and spybot but nothing has worked. Also the windows bar is missing now for some reason. Windows Xp Service Pack 3.
I moved to a new house last week, and i have comcast internet which works on cable lines.i have them for years. anyways, i got my own motorola sb5101 modem, which i use for a while now.the problem is that in the new house the modem only works when it is connected to a computer with windows xp, it DOES NOT work on windows vista or 7,also, when i connect my router into it, it does not work either.when i connect it to windows 7 64-bit, it says "unidentified network" and "no internet access" but it works perfectly fine on windows xp 32 bit. (i have 2 xp's and 3 windows 7's)
Using Windows 7 Pro. I get a yellow triangle with ! on the LAN icon. The message is : 'no internet access' but the internet works.On Network and sharing center, using work network, everything is ok.It doesn't happen all the time.
We have just got our daughter a brand new Dell laptop for her birthday, it is fine apart from she cant get into half the websites she wants to. On these websites internet explorer just hangs.
Examples of hanging websites are:Argos, Travel Republic, Easy Jet, Vue Cinemas, Bin weevils, National Rail, Expedia, Ebookers
The laptop has Windows 7 and Internet Exolorer 9.I suspect it is something to do with the dreaded Flash but the laptop has Adobe Shockwave Flash Object enabled and any attempt to download Adobe Flash Player results in a 12% timeout download (always 12%)
Funnily enough I have an old Dimension 5000 which behaves in exactly the same way including the 12% download but I expected a brand new laptop to work..Is this a known bug with Dell products ie. you cant access half the websites on the internet without a load of grief ?
I'm trying to connect my desktop to my laptop over the WLAN. Both computers are connected to the router, as well as I've got no problems sharing files to my PS3 via media servers. But connecting the two computers is impossible. I've tried everything I can think of. I've tried connecting the two both using Homegroup services, and in the old fashion way, without the Homegroup service, using only IPv4.It seems like firewall settings and sharing in general works ok, but making it work over WLAN is very troublesome.
I moved to a new place, with a new internet provider (a dorm, so it's all public). In my old place, my PC worked fine (Windows XP), but now it fails to connect to any of the Browsers. My laptop (Windows 7) is fine though with the same cable. No problems at all.
I'm visiting my mom for the holidays and so of course I got roped into her tech problems. She has an emachine with windows 7 that won't browse the internet even though it appears to be connected. The internet works fine in safe mode. She didn't have any antivirus software (in fact, she doesn't have that many programs at all) so I downloaded malware bytes and the scan came back clean.She has Hughesnet (the satellite people) as her ISP and she says that the problem started after they upgraded her modem.I'm a bit stumped as to what the problem could be, since all the google searches I did on the topic seemed to be some kind of problem with antivirus software (having two conflicting, or some kind of wonky settings) or a virus, neither of which seems to be the case.
I have a Windows 7 HP with intel pentium my Internet only works in safemode with networking. Orignially it worked when I used internet explore 64-bit but eventually that stopped working as well. I have 3 accounts on this computer and I need safemode with networking for all of them. I do have both mcfee and norton anti virus i was told that may be the problem however, I do not know how to install either of them.
I'm running Windows Vista on a Dell Laptop. Normally I just use wireless wherever I am but now I need to hard wire to the computer. It was initially working for a few minutes but then the connection dropped. Now whenever I plug the cable in, it shows it as being connected but comes up as local only so I can't browse or do anything.
I have tried:
-Restarting the machine -Ensuring that windows was picking up the IP addresses automatically -Checking the connection on another computer, works fine. -Disabling the IpV6 -Disabling/Enabling the LAN connection in the Manage network connections setup -Uninstalling, re installing the driver for the ethernet adapter -System Restore
I've also tried in safe mode with networking and have disabled any firewalls that were running.Again, most of the time I never use the hard wired connection, but whenever I have, it hasn't had any problems until now.It always comes up as being connected, but says local only.
I just recently purchased a dell latitude E6400 laptop and I did a clean install of Windows 7 Ultimate 64-bit on it, not an upgrade. I also installed service pack 1 right after the OS install. My problem is I cannot find a single driver that allows my WiFi card/connection to show up in Windows. I have been browsing the internet like a fiend and cannot find a single driver or solution anywhere for this. Every install or driver I try either shows an error saying "incompatable" or just does not fix the issue. All I want is my WiFi card to work, and dell did not have any drivers that worked off of its support site even when I put in my service tag number. compatable driver for the WiFi card for windows 7 64bit? Or steer me in the right direction to get the WiFi working on my laptop?
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I am just trying out RealVNC on my Windows 7 based PC's on my network.At the moment I have Avast AV on one of the PC's and non on the other (yet)I have the IP's of both PCs and when I start up the RealVNC Viewer I input them but it cannot connect for some reason.It comes to a stage where it asks me for the username and password, I am guessing this is the username and password of the PC I am wanting to connect to?
I have 3 pc's all running windows 7, all connecting through a wireless router, How would I be able to link/connect them all together to share data/files?
We've had an old netbeui network set up for a while now but recently switched over to TCP/IP so my computer (running Windows 7 x64) could connect. The other computers on the network are running Windows 2000 and XP.All the older computers are working, but I still can't get mine to connect. It shows up as "Unidentified Network: Public Network"I really don't know where to go from here. I don't know if it should just pop up automatically or if I am supposed to configure it somehow.
When I use QuickVPN under XP, I connect to my RVS4000 without problems. When I switch to new computer running Windows 7 and V4.2.1 QuickVPN I can get all the way to Verifying Network. Then I get the message that: "The remote gateway is not responding. Do you want to wait?" - repeatedly. The icon in the tool bar remains with a red slash and I am unable to ping devices on the lan side of the router. However, when I check the VPN Summary on the router, I see that it thinks I'm connected. When I check the VPN log I see that I am not:
Oct 12 10:27:53 - Configuration changed! Oct 12 10:28:33 - Configuration changed! Oct 12 10:28:34 - [VPN Log]: added connection description "ValR_rw_rw"
[Code]....
I've disabled MS Security Essentials and made sure the Firewall is on. IPSec Policy Agent and IKE and AuthIP IPSec Keying Modules services are both started. I've created a rule to allow QuickVPN throught the firwall in and out and a rule to let traffic on 443 and 60443 UDP and TCP through the Firewall.
I put just got a wrvs 4400N and when I replaced my old linksys router I can't access my network computers anymore. I'm I missing something or do I need to do some kind of setup?
