Unable To Get Router To Work Wirelessly
Feb 3, 2013
I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wirelessly but it only works if I also enable the primary ISP connection on my computer - so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off
View 4 Replies
ADVERTISEMENT
Sep 1, 2012
1. Printer:HP Officejet 6600
2. OS: Windows 7
3. Error: Cannot find printer on wireless network *name*
4. What did I do? Just installed the printer software from HP website.
I got the HP Officejet 6600 and successfully connected it to the network at home. I managed to connect the home desktop (Windows 7), a laptop (Windows 7) and a Macbook Pro. These are all the personal ones.However, when I tried to install the the HP Officejet 6600 on the work laptop, the installation wasn't able to find the printer on the home network when doing it wirelessly. I managed to install it the USB cable but that was about it.Also, when trying to install it wirelessly, it found our home network, couldn't find the printer so it prompted me to type in the IP address for the printer, which I did, however, it still wasn't able to find it. The work laptop is connected to the home wireless in the network connections and the American Express server.Is there a way to get around this issue so I can connect the laptop to the printer wirelessly as it would make life a LOT easier.
View 4 Replies
View Related
Apr 21, 2011
I am having problems with my linksys wireless G ADSL gateway WAG54GS router. I am on Windows Vista/Internet Explorer. When I set up the router to work on the internet when I first bought it (several years ago), something must have gone wrong in the installation because it works only when connected to the computer by the lead, and NOT wirelessly.
While this is fine for general internet browsing etc on the main computer, my problem now is that I cannot connect anything else to it (such as my Playstation 3) because the router does not work wirelessly and I do not have the WPA key that the PS3 asks for. Is there any way can fix this without doing a complete reset on the router?
[ALSO: the router also periodically goes wrong, e.g. loses connection for no reason at all - I often have to disable and then enable the internet connection, or turn the router off for 15 seconds then switch it on again, and then it's fine again. I live in a rural area though, so it might be because of a poor connection. Our telephone connecton isn't very good either and sometimes goes wrong.]
View 4 Replies
View Related
Aug 16, 2012
I have this WRT350N with me for a long time. It always worked well, and for a while I didn't used it (like 1 year). Last morning, I set it up and put it to work again and it worked perfectly, but in the evening the wireless stop working. Through cable, the internet works finely.
The light does not turn on or blink anymore. The router setup says that SSID broadcast is enabled. But I can't find the network, even if I type its name and password (supposing it was in invisible mode or something like that).
So I restored the router to its normal configuration, and once again the wireless does not work. Is there something else I can do to make the wireless work again?
View 5 Replies
View Related
Dec 14, 2011
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
View 2 Replies
View Related
Aug 23, 2011
I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
View 3 Replies
View Related
Nov 16, 2011
I have a hard wired connection thought my cable modem, but can not get it thought my WRT160N v2
View 2 Replies
View Related
Mar 15, 2012
I have Windows 7 on Dell N4110. I am unable to connect to my netgear router wirelessly. If i restart the router, it may work for some time but then again gets disconnected. However, i can connect to it through wired connection. Others in my apartment can connect to the router. They dont have windows 7 (they use vista, ubuntu). Its working fine for them. I have tried many things like updating the router, disabling firewall, changing wireless security settings, updating windows but none of them seem to work. My friend who has the same laptop also cant connect when I cant. As soon as my connection is disconnected, his also disconnects.
View 1 Replies
View Related
Nov 29, 2011
I have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
View 9 Replies
View Related
Feb 15, 2012
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies
View Related
Sep 20, 2012
We have recently switched routers and now my laptop doesn't work wirelessly; it connects to the router but there isn't an internet connection. The laptop works fine when the LAN cable is plugged in though. Our other laptop can connect to the internet with or without the LAN cable. Both are Toshibas running on Windows Vista.I have tried various approaches such as downloading the latest Atheros AR5007EG drivers but it said that they're already the most up to date. [code]
View 5 Replies
View Related
Mar 30, 2013
My Acer had been working fine wirelessly for years and years. This is a long story so get ready. My acer runs windows xp. Its a netbook as well. That much said I was surfing the web and at a point I noticed connection was gone. I looked at the icon in the below tray and it had a yellow caution and it also indicated little or no connectivity. I tried uninstalling driver then having system recognize it. None of the tricks I know resulted in it working. The two things I noted were Low or no connectivity or it gets hung on validating identity. Sometimes I see something about unable to access or read a certificate. Ok I tried my other net book and it connects to the home wireless no problem. The acer will connect to my paid wireless (credit card size type) if connected via usb cable. So i thought ok the internal net-books wireless adapter is broke so i go buy a wireless usb adapter. Now I show two wireless icons. neither one actually connects. Basically same results as if I never had the usb modem. Now I have done several system recovery operations with same results. one of them was with the on hd hidden partition and also from CD?
View 6 Replies
View Related
Feb 23, 2011
I am unable to connect to my network using my d-link wireless adapter. I am able to connect to my neighbor's network and other devices in my house can use my network with no problem. I am absolutely positive that I'm inputting the right password, but am unable to connect.
View 3 Replies
View Related
Nov 21, 2011
I'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
[Code].....
View 1 Replies
View Related
Nov 24, 2012
-I was using wireless fine a couple hours ago
-Decided to mess with proxy settings with chrome
-Downloaded "proxyswitchy" chrome extension
-Obtained an IP and port # from hidemyass.com
-Tried to connect to internet, got message "unable to connect to proxy server"
-Decided this proxy stuff isn't worth it, deleted the proxy extension
-Reset router
-Now wireless isn't working on ANY laptop- it shows a connection available but cannot connect to it, however wired connection works (and is how I'm on here right now)Is this as simple as setting up a new wireless connection?
-went under "proxy server" under "LAN settings" in ctrl panel
-The box which stated "use a proxy for LAN" was checked, and the address and port I obtained from hidemyass were underneath
-I unchecked the box, applied the new settings, and reset my router
-Still doesn't connect wirelessly
View 1 Replies
View Related
Dec 29, 2012
We have 2 HP Pavillon laptops working with a Netgear DG834GT wireless router and both working fine until a week ago. Now one cannot connect wirelessly (but can using ethernet cable) the other is working fine. ISP is Sky. Anti virus on both laptops is Bullguard. It does connect for a minute or so but with poor signal quality and speed of 1mb ps and then drops connection. At first it said unidentified network but after various attempts trying to resolve it does now actually say Home Network but ipv4 connectivity which should say internet says no internet access. It does go back to unidentified network and then back to home network intermitently. The only thing that has been done recently was that my husband connected a Samsung Galaxy 2 Tab to his laptop (daughters christmas present) to download items to it and whilst connected he noticed that Samsung Mobile MTP Device installed something. Could this have caused an issue. He cannot see how to remove this. Below is ipconfig from both laptops
The first one is working fine
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJulie>ipconfig/all
[Code].....
View 7 Replies
View Related
Jan 14, 2011
We have 2 computers the main one running OS XP and mine running Vista. Previously, we had no problems with my computer finding the main on the network along with the printer. But now the main computer can see mine (printer and PC) but I cannot connect to the main. Mine does not see the printer nor the PC. We are both running the same virus protection, which is Norton. I really want to use the main computer's printer, which I was able to do until for some reason now I go into networking and it is not there. I know it is marked as shared. When I go into setup network printer and type the name of the printer a window pops up "The printer sever spooling service is not available". I have uninstalled the printer software and drivers and reinstalled but still not showing up on the network?
When I click print a document the printer I am looking for is there but it shows as offline, which it is not. I am not 100% sure but seemed to occur when we switched from Mckfee to Norton?
View 14 Replies
View Related
Jan 12, 2011
I'm using Untangle on my clients wireless network. It handles all the DHCP and DNS requests. I'm using the web filter option as well. There are two access points, one on upper level and one on lower level. All connect into a switch and then into the optional port on the firewall. Firewall is not set up to give out DHCP leases. Pretty basic setup. Ever since I got Untangle up and running ive noticed my laptop, which has Win 7 as O/S will connect to wireless network, i can ping untangle box, and access point. But no internet. Signal bar shows I have limited connectivity. I thought it was just something on my laptop and set the issue aside. For the record I've never had any issue with connecting to a wireless network with this laptop, at home Im using Ubuntu server to handle all my DHCP, DNS requests on both my wired and wireless network. Never had a problem. Now this client is a library. And I talk to the director, and she has gotten complaints that any patron that uses Win 7 can not connect to wireless. When I'm not there we have a laptop that uses XP, it connects fine. All other patrons that use XP connect without a problem.
View 10 Replies
View Related
May 10, 2011
I am unable to access files or folders wirelessly between my 2 laptops both running Vista. Both machines can see each other. I can access files with a wired connection.When using wireless I get error message 0x8007035
View 2 Replies
View Related
Sep 1, 2011
I have a compaq Presario CQ 60 windows vista 32 bit. I cannot connect to my centurytel westell 7500. I was able to connect to the westell versalink 327W but when I upgraded to the 7500 I havnt been able to connect wirelessly. I can with the Ethernet but not wirelessly. My wifi network adapter is a atheros AR5007 802.11b/g.
View 3 Replies
View Related
Sep 29, 2011
acer laptop unable connect wireless to DSL-2730. connects OK through ethernet cable
View 4 Replies
View Related
May 28, 2011
I recently configured a linksys range extender to my modem and since doing that, I'm getting a message stating that there is an IP address conflict with another system on the network. When I set up the range extender, I assigned an IP address to it that was different from the modem but yet this message still appears. Also even though my wireless connection is connected, I'm unable to connect to the internet - I keep getting the message 'internet explorer cannot display webpage'.
View 3 Replies
View Related
Jul 3, 2011
I've been having problems connecting my laptop to the internet through wireless. When I plug it in with a cable it works fine. I also know my wireless works fine because i have other things attached to it. When I try to connect it says limited or no connectivity, but the signal strength is excellent. I have tried to repair the problem but it then tells me it cannot renew my ip address. I've also tried the ipconfig /release then renew, and thats when it says about my DHCP.
View 1 Replies
View Related
Jul 24, 2011
Just recently im having trouble connecting to the wireless Using my hp laptop. The Wireless Was previously working fine though recently, has stopped working, all the other devices on the wireless network work fine (Asus Laptop, Iphone's etc). The hp laptop has no problem in connecting to the neighbours wireless and picking up a signal, however, when i go to search for the WAG320N im unable to find it in the list, sometimes it does appear, but after double clicking has trouble connecting to the wireless and will then dissapear from the list. I have tried manually entering the SSID and Password and seeing if it would connect, and also manually entering the IP address however no luck, no other device on the network has trouble finding the broadcast Signal Apart from the HP DV6-3139TX
View 1 Replies
View Related
Mar 27, 2012
So I have to complete a lab using OPNET and I've attempted to complete it using the the step by step lab outline 3 times now, and each time, it fails to capture the Client_HTTP Page Response Time statistic on the 10-T lan based in africa. It's failing to capture it in all 3 scenarios, so something must be wrong in the configuration. As I've said, I've redone this lab 3 times, so something must be wrong in the manual.
View 3 Replies
View Related
Jan 1, 2013
I start this topic for may an answer as i face a problem with VPN and most likely with PORTS.
My firmware was 1.0.0.30 and i Update it to 1.0.1.9.
When i was try to connect with my VPN i am unable to reach it with error 800. MS says your firmware is too old so you get this error.
At the same time for VNC and some other stafs was necessary to open ports. Until now it seems that the router is not opening the ports.
What i should do? Return to the old firmware? Any extremely changes at new firmware so they had add more options for the ports? All the configuration is exactly the same as it was before the upgrade.
View 3 Replies
View Related
Jul 12, 2013
I have an Inspiron 570 desktop that has worked fine for at least 6 months since the warranty expired...we had a power surge last week while I was gone and when I returned I was unable to get the wired network to work. I ran the diagnostics and it said that my cable was not plugged in...it was. I rebooted, reseated cables, etc. with no luck. I reset the cable modem and router, reseated cables, rebooted, etc with no luck. I plugged the cable into a laptop and it worked fine.
The diagnostics tools on the desktop indicate there are no issues with the network adapter and that it is allegedly working fine. What I have noticed is that the light indicators on the RJ45 jack on the back are steady state yellow and orange, regardless of whether there is a cable plugged into it.
View 1 Replies
View Related
Sep 4, 2012
I've been otherwise very happy with my Linksys WRT54GL but have not been able to work from home without my work VPN from disconnecting/reconnecting multiple times throughout the day.
The IT guy said that a lot of people have issues with the older Linksys routers, and recommended I get something more modern. Assuming that is correct, what would be a good upgrade for me? I really don't want to spend too much time setting up the new router, but would love QoS if it comes out of the box. I have about 4 wired connections and about 6-8 wireless connections, on a 20MBit connection.
View 19 Replies
View Related
Aug 23, 2012
I have gone through the docs in creating a static NAT. I have gone into firewall/NAT Rules and set the internal / external entries, set access rules for the various services. However, I am unable to make a connection remotely. Somewhere along the line, I must be missing a command or something.
ASA ver: 8.4(4)
ASDM ver: 6.4(9)
View 1 Replies
View Related
Dec 28, 2012
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies
View Related
Feb 5, 2011
I have and issue that is bugging me a bit. I have a DSL connection that also is set up with TV also through the ISP modem. I also have 2 phones connected to wall jacks with DSL filters and made sure they both have 4 wire phone lines. I replaced the 2 wire phone line to modem with a 4 wire one. The desk top is connected to modem wired and internet works. There are 3 other slots but they are for TV box's that this company uses (CTC) I bought a Netgear router tried that several times called and ISP stated they won't work with Netgear.Ok so bought a Linksys E 1000 wasn't able to get that one to work either. Brought to another person's place and works fine. Connected back and only way to get to work wired to desk top is to have internet coming on on line 1 and compter on line 2. I can connect to router wirelessly to the routers main page but no interent. I can connect to the neighbors wireless internet so I have to believe that it's not the phones in the place. I can also run a wire from router to laptop and go on internet but does not work wirelessly.
View 9 Replies
View Related
Aug 18, 2012
I'm having trouble connecting to my Belkin router wirelessly (Wired works fine). I try to get to the IP address (192.168.0.2 and every other version of that) but it does not connect. On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark. I have reached the end of my limited computer capabilities trying to fix this problem myself.
View 1 Replies
View Related
Apr 15, 2011
Currently i have one main router in my house connected to the phone line. what i want to do is add another standalone router which will wireless connect to my main one.i want to connect my computer to the router wired then that router connects to the main router wirelessly.what is this method called ive seen things like wireless repeaters and wireless bridge.
View 6 Replies
View Related
