Linksys Cable / DSL :: Hp Laptop Unable To Wirelessly Connect To WAG320N
Jul 24, 2011
Just recently im having trouble connecting to the wireless Using my hp laptop. The Wireless Was previously working fine though recently, has stopped working, all the other devices on the wireless network work fine (Asus Laptop, Iphone's etc). The hp laptop has no problem in connecting to the neighbours wireless and picking up a signal, however, when i go to search for the WAG320N im unable to find it in the list, sometimes it does appear, but after double clicking has trouble connecting to the wireless and will then dissapear from the list. I have tried manually entering the SSID and Password and seeing if it would connect, and also manually entering the IP address however no luck, no other device on the network has trouble finding the broadcast Signal Apart from the HP DV6-3139TX
I have a Linksys WAG320N wireless N router which provides wireless coverage to only a part of my apartment. I'm trying to extend the wireless coverage by using an Apple Airport Express (1st Gen). The only way this would make sense would be to extend wirelessly.
1) is this technically possible? I had assumed so when buying the Airport Express
2) Do I have to change some settings inside my WAG320N to make it "Extensible" ?
I bought my WAG320N 1 year ago, in this time i tried to connect in wireless mode many times, but I can' see the SSID that I have created from my laptop and from my palm. At the beginning, when the router was new i saw 2 or 3 times the SSID for 2 minutes, and after this time the SSID disappear. Is my WAG320N damaged?
I'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration Host Name . . . . . . . . . . . . : Primary Dns Suffix . . . . . . . :
I have a compaq Presario CQ 60 windows vista 32 bit. I cannot connect to my centurytel westell 7500. I was able to connect to the westell versalink 327W but when I upgraded to the 7500 I havnt been able to connect wirelessly. I can with the Ethernet but not wirelessly. My wifi network adapter is a atheros AR5007 802.11b/g.
How to configure settings for router E4200I live in Finland and bought new Cisco Linksys WAG320n router modem as I am experienced Cisco user. However after spending several hours and setups on the WAG320n router I cannot get it to connect on the ISP ADSL line.
RFC2684 Bridged LLC/SNAP g.dmt or ADSL2+ VPI 0 VCI 100
But once I setup these or acutally any other setting I cannot get the router to connect. With the right settings I can get the DSL PVC status up and connected but the ModemRouter cannot connect and retrieve IP-address from ISP.
I have 2 PCs, an Acer H340 and a network printer wired to the WAG320N; two other PCs are connected wireless. On every PC I have Windows 7 and Ubuntu (except the NAS with WHS).When I boot with Ubuntu on every PC, I can print, I can connect to intenet, open the Web interface of the WAG320N at 192.168.1.1 but I CAN'T see the NAS and the other PCs: this with the wired PCs and the WiFi connected ones. A Galaxy Tab can browse the NAS content and the Web.I didn't had this problem with the modem router I had from the ADSL supplier and the Huawei D100 I used before.On the network map of the Cisco Network Magic the Linux PCs are showed connected to the WAG320N with a dotted line, when the W7 ones are connected with a solid line.
This is a bit of a pain as the behaiviour is not consistent. whenever I connect to the Device webpage a number of things may happen
1. There is no connection - the page tries to load but never does. While this happens the router drops the ADSL connection and re-connects. I have to close the browser session and try again later. OR
2. The Browser session connects but at some point after the connection, say when I am trying to save changes or even just browsing through the config pages the session hangs, and again the router drops the ADSL connection and re-connects. I have to close the session and try again later.
I have noticed this happens when I use my OpenSuse 11.4 Linux Box using Firefox 5 or even using my Win 7 Box using IE9.
I have two buildings. In first building I have network with internet. In other building network without internet. I need to connect buildings to the same network using two WAG320N modems by the phone line cable. Is it possible and what configuration I need to set up?
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
A couple nights ago, my wireless router (Linksys BEFW11S4 ver4) just stopped letting me connect to the internet. All the lights were still flashing as they should, I could still go to the setup page, I just could not connect to the internet, both through wired and wireless. I could connect straight through the modem though.
So I decided that since the router was probably over a decade old that maybe it was just its time, and I bought a new one (E1000). I connected it, and still could not connect to the internet. I then did some internet searching and found this [URL] and I followed what was mentioned in post 10 (MAC address clone and changing local IP). Now I can connect through the wired connection and I rejoiced thinking I solved it.
Then I checked my laptop and it won't even connect to the router. It sees the router, but when I ask it to connect, it just says it can't. I decided I was too exhausted to try searching and fixing it on my own and if I tried I'd just end up breaking something out of frustration.
I have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]
I have just arrived at a friends house to stay for a while and my laptop does not connect to the internet properly through the wireless yet works perfectly when plugged into the router directly through ethernet cable. it is not the actual router's wireless that is broken because there are three other laptops that connect and work just fine.I have done several virus scans using AVG and Spybot Search and Destroy and other than incredibar nothing has been found so i dont think it is a virus. I thought it might have been the 6to4 adapter so i disabled to no avail.The problem is not connecting to the network as that works fine and every now and again i can get 10 minutes of internet use before it stops working. most of the time still saying i am connected to the internet for an extra 5 minutes then saying i have a local only connection[CODE]
i have a compaq laptop and for some reason my laptop doesnt connect to my router and internet wirelessly it can only connect successfully through an ethernet cable. When trying to connect wirelessly i am getting a local only connection.
1. Printer:HP Officejet 6600 2. OS: Windows 7 3. Error: Cannot find printer on wireless network *name* 4. What did I do? Just installed the printer software from HP website.
I got the HP Officejet 6600 and successfully connected it to the network at home. I managed to connect the home desktop (Windows 7), a laptop (Windows 7) and a Macbook Pro. These are all the personal ones.However, when I tried to install the the HP Officejet 6600 on the work laptop, the installation wasn't able to find the printer on the home network when doing it wirelessly. I managed to install it the USB cable but that was about it.Also, when trying to install it wirelessly, it found our home network, couldn't find the printer so it prompted me to type in the IP address for the printer, which I did, however, it still wasn't able to find it. The work laptop is connected to the home wireless in the network connections and the American Express server.Is there a way to get around this issue so I can connect the laptop to the printer wirelessly as it would make life a LOT easier.
I have a WAG320n and I wish to use it as a modem only so that I can use an Airport Extreme as my wireless router. how to configure the WAG320n so that it can be used in this configuration?
I have an intermittent issue with a new WAG320N.Device is new (installed for 1 month now) and is running the latest firmware "out of the box".
Device was confirmed as working (recommended) via the ISP, as it uses a Broadcom chipset, so it works "more reliably" with the ISP's hardware which uses the same chipset.
Setup was painless and the router synced up fine and has been operating for a few weeks. However, twice in the past week the router has become unresponsive to ping over the LAN. Furthermore, the device's lights indicate everything is OK, however I have to reset the router (power cycle) and then it returns to normal.
WIFI is OFF. LAN IP is set manually, DHCP is OFF. The router is plugged into it's own UPS.
I'm trying to play some online games and my WAG320N does not forward ports, upnp does not function and to top it off DMZ wont even work (not a software firewall issue either). I have the latest firmware (and honestly the stock firmware is terrible).
Am I out of luck or is there something I can do to fix this? I sure as hell will be steering clear of linksys products after this.
This WAG320N Router can get really slow after a while use which is really frustrating for me since I am a gamer. Power cycling it SOMETIMES does the trick but it will still get slow. It has been slow just now and over here it is midnight so the internet peak should be down and my internet should be faster but its now.
I have the WAG320N. I know if my router is updated to fix the bug of the WPS?There is an update? Which is the date scheduled for release? The vulnerability of my network has been compromised yesterday because of this bug, so either the update is released soon or I'll have to switch to another product of some companies more serious
Transferring a file between a wired Win 7 machine and a wireless Snow Leopard mac seems to top out at 32Mbps.I've seen over 60Mbps on this laptop using N networks before, and when I wire the laptop I get a more respectable 240Mbps (presumably maxing out the server's disk I/O rate), so I'd say the issue is the router.
Things I have already tried:updating the firmware to 1.00.125Ghz modeFinding the least crowded 2.4Ghz channelswide channelsSetting network mode to N-onlySetting the transmission rate to 108Mbpschanging the beacon interval to 50, the frag threshold to 2201 and the RTS threshold to 2202
I have only purchased this modem a few days ago (upgraded from a working Netgear DGN2000 for Gigabit).... it's solid most the time except for once a day when it needs to be reset.
One morning I accessed a single website, only to find the next wouldn't come up. (approx 7:30am) Lastnight the net was working fine at 11:30pm.... Thismorning I woke up, checked my download manager to find that at 2:30am all queued downloads failed, so the ADSL dropped sometime inbetween then.
The LAN and Wifi still work fine, when I go into the settings and click "reconnect" nothing happens. I need to turn the modem off for a min before it works ok. There is no newer firmware as of yet to try.
