Protocols / Routing :: WRT350N - Linksys Router Does Not Work Wirelessly
Aug 16, 2012
I have this WRT350N with me for a long time. It always worked well, and for a while I didn't used it (like 1 year). Last morning, I set it up and put it to work again and it worked perfectly, but in the evening the wireless stop working. Through cable, the internet works finely.
The light does not turn on or blink anymore. The router setup says that SSID broadcast is enabled. But I can't find the network, even if I type its name and password (supposing it was in invisible mode or something like that).
So I restored the router to its normal configuration, and once again the wireless does not work. Is there something else I can do to make the wireless work again?
View 5 Replies
ADVERTISEMENT
Jan 23, 2012
how to connect a pc to a hdtv wirelessly. The tv is to be used like a monitor. I want to display a PowerPoint file. Currently there is a lan already setup in the workplace. I have looked at some pc to tv devices but am not sure if they would work. My company's TIS department wants to put a wireless card in the workstation pc but is not sure how to connect the tv as a monitor?
View 1 Replies
View Related
Apr 21, 2011
I am having problems with my linksys wireless G ADSL gateway WAG54GS router. I am on Windows Vista/Internet Explorer. When I set up the router to work on the internet when I first bought it (several years ago), something must have gone wrong in the installation because it works only when connected to the computer by the lead, and NOT wirelessly.
While this is fine for general internet browsing etc on the main computer, my problem now is that I cannot connect anything else to it (such as my Playstation 3) because the router does not work wirelessly and I do not have the WPA key that the PS3 asks for. Is there any way can fix this without doing a complete reset on the router?
[ALSO: the router also periodically goes wrong, e.g. loses connection for no reason at all - I often have to disable and then enable the internet connection, or turn the router off for 15 seconds then switch it on again, and then it's fine again. I live in a rural area though, so it might be because of a poor connection. Our telephone connecton isn't very good either and sometimes goes wrong.]
View 4 Replies
View Related
Mar 14, 2011
I am trying to connect wirelessly to my BT Home Hub via a USB Wireless adaptor. The homehub works perfectly and I have other laptops in the house connecting via the wireless networkHowever, this is the problem. The Wireless connection status shows as good but packets only being sent and not received. Therefore when I load Internet Explorer, I get WebPage Not availableI notice that my IP address is starts with 169 and researching forums suggests that this is the problem and it should start 192? I have tried all sorts of things but simply cannot get this resolved. If I plug the HomeHub into the laptop directly, the connection via the ethernet cable works fine.
View 6 Replies
View Related
Jun 1, 2011
I can't get RDP to work on a specific computer.I've already set it up on the router, know the IP address, and I can get it to work great with the server, but the workstation we want it to go to won't accept it.I checked, it's set to allow RDP, the firewall exception was setup, also turned off the firewall completely, removed the antivirus software, checked TCP/IP filtering on the lan connection, even changed the listening port and still nothing.
View 9 Replies
View Related
Jun 10, 2009
I have a wrt350n at home and it works fine but it has only one little issue. When I connect my lap wireless I cant see the other work group pcs but if I wire the laptop there is no problem. I use ip to share files and not net bios but sometimes it would be great to find all the pcs on the work group easily and not memorize all the ips.
Disabled firewalls, updated firmware, tried to change network ip... nothing solved. Have no problems at work with an WRT54G.
View 2 Replies
View Related
Aug 2, 2011
I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies
View Related
Dec 26, 2012
I am having issues with the WRT350n where I am getting an "No internet access" message. When I look at the wireless network connection I can see the wireless router and it says "connected" but when I scroll my mouse over the icon, it reads "No internet access". I try to access a webpage and it will not work. I originally had it connected and working properly in my home. However, I removed it and tried connecting in my office and started experiencing this problem. I did not run the setup using the CD provided. I just unplugged it from my home network and reconnected it to my office network, of course with a few passphrase changes and wireless MAC filters only allowing certain PC's to be able to access the internet. I double checked all MAC addresses of each device that I entered into the table and they are correct. All devices see the wireless network but cannot access the internet. Any suggestions? Should I re-run the installation using the CD?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Jun 3, 2012
I have a desktop that I have my Minecrarft Server on. It was working fine until I forwarded port 25565 to it, and now I cant use firefox or internet explorer. I can access the server from my other computer on the same network, but none of my friends can from their houses.
View 1 Replies
View Related
Oct 20, 2007
When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies
View Related
May 23, 2012
I have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?
View 2 Replies
View Related
Aug 27, 2011
A month ago my ISP was routing half my subnet (129-254) over DSL. I just moved and routing no longer works without NAT. The issue is probably with the new DSL 'modem,' a zhone 1611-A1, but I am not sure how it should be configured.The 1611 is connected to a WRT610N, which works in NAT mode with the following settings:[code] With the previous settings, networking doesn't work from a workstation, though I can traceroute from the 610. I would like all workstations on the "LAN" to have fully addressable internet addresses like the previous configuration.There is an admin interface on the 1611, but the cursory settings I've tried don't work and I'm not a routing expert. The ISP is kindly routing my network, but they don't provide much support.
View 11 Replies
View Related
Jul 15, 2012
well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies
View Related
Jan 4, 2012
I tried to upgrade the firmware of my WRT350N but while upgrading my wife switched on the oven and.... yes, power down -> the upgrade has been interrupted. Now the router is no longer responding, it shows just the green power light on (not blinking). I tried all the resets I found googling (pressing the reset button for 30 sec, isconnecting power and reconnecting it again) but no way, there's no way to ping the router at its default address 192.168.1.1. All the leds are switched off (internet, usb, wireless, security) except the green power light. Is there another way to have it back or it is definitely lost?
View 6 Replies
View Related
Mar 6, 2007
Has anyone managed to access the Storage Link from the internet on the WRT350N router? I am on my second one and it still doesn't work. Also the configuration restore does not work either.
View 9 Replies
View Related
Aug 2, 2011
My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password. how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N
View 1 Replies
View Related
Sep 15, 2011
I have a Dell Wireless 1500 draft N adapter that only connects at G speeds in mixed mode. I tried N only mode and my adapter will not connect. I have tried N mode Auto and 40hz wide and nogo. I have tried TKIP + AES and AES and nogo.
View 1 Replies
View Related
Apr 7, 2012
I recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies
View Related
Feb 3, 2013
I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wirelessly but it only works if I also enable the primary ISP connection on my computer - so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off
View 4 Replies
View Related
Mar 7, 2012
Comcast Cable Internet Linksys WRT54G Router (using wired, not wireless)
I've done this a million times over so I thought I knew what I was doing. I set my IP as 192.168.1.236 and get all of the information I need from ipconfig. When I put it all together though, it just doesn't work. I think I'm not getting the correct DNS information from ipconfig and the blockheads at Comcast have no idea what a name server is. I've called and talked to about twenty different people there and no one can give me my name server. *sigh*
At any rate, below is a screenshot of what I'm getting in ipconfig. My assumption is that I'm not getting the correct DNS info, but I don't even know at this point.
View 5 Replies
View Related
Jun 23, 2011
While watching anything from Netflix thru my Wii gaming console, i keep getting disconnected and have to restart. When I plug the ethernet cable directly into the Wii, this problem does not occur. I have a Linksys BEFSR41 ethernet 4 port router.
View 2 Replies
View Related
Apr 1, 2011
Recently I connected a Linksys wrt54g broadband router so that my daughter could also be online. the problem i have developed is that while I have the router connected to my network, my internet keeps kicking me off. When I disconnect the router my internet stays on and I have no problems with it. I am working with a custom built PC with quad core processor, 4 gigs of RAM, nvidia graphics card
View 1 Replies
View Related
Dec 14, 2011
I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
View 6 Replies
View Related
Oct 1, 2012
port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 Replies
View Related
Sep 20, 2012
We have recently switched routers and now my laptop doesn't work wirelessly; it connects to the router but there isn't an internet connection. The laptop works fine when the LAN cable is plugged in though. Our other laptop can connect to the internet with or without the LAN cable. Both are Toshibas running on Windows Vista.I have tried various approaches such as downloading the latest Atheros AR5007EG drivers but it said that they're already the most up to date. [code]
View 5 Replies
View Related
Mar 30, 2013
My Acer had been working fine wirelessly for years and years. This is a long story so get ready. My acer runs windows xp. Its a netbook as well. That much said I was surfing the web and at a point I noticed connection was gone. I looked at the icon in the below tray and it had a yellow caution and it also indicated little or no connectivity. I tried uninstalling driver then having system recognize it. None of the tricks I know resulted in it working. The two things I noted were Low or no connectivity or it gets hung on validating identity. Sometimes I see something about unable to access or read a certificate. Ok I tried my other net book and it connects to the home wireless no problem. The acer will connect to my paid wireless (credit card size type) if connected via usb cable. So i thought ok the internal net-books wireless adapter is broke so i go buy a wireless usb adapter. Now I show two wireless icons. neither one actually connects. Basically same results as if I never had the usb modem. Now I have done several system recovery operations with same results. one of them was with the on hd hidden partition and also from CD?
View 6 Replies
View Related
Aug 24, 2011
The router is technically operating. My internet is up and running and working great.What I cannot do is bring up the Linksys router page to log into the router by entering the ip 192.168.1.1 in the browser URL. When I do, nothing happens.
View 9 Replies
View Related
Sep 1, 2012
1. Printer:HP Officejet 6600
2. OS: Windows 7
3. Error: Cannot find printer on wireless network *name*
4. What did I do? Just installed the printer software from HP website.
I got the HP Officejet 6600 and successfully connected it to the network at home. I managed to connect the home desktop (Windows 7), a laptop (Windows 7) and a Macbook Pro. These are all the personal ones.However, when I tried to install the the HP Officejet 6600 on the work laptop, the installation wasn't able to find the printer on the home network when doing it wirelessly. I managed to install it the USB cable but that was about it.Also, when trying to install it wirelessly, it found our home network, couldn't find the printer so it prompted me to type in the IP address for the printer, which I did, however, it still wasn't able to find it. The work laptop is connected to the home wireless in the network connections and the American Express server.Is there a way to get around this issue so I can connect the laptop to the printer wirelessly as it would make life a LOT easier.
View 4 Replies
View Related
Mar 3, 2012
I am using Linksys WRT54G router on my broadband internet connection. I want to know, is there any way to allocate more or less bandwidth to any PC connected to my network?
View 2 Replies
View Related
Dec 27, 2012
I just bought this wireless router. I have 3 smartphones, kindle fire, 2 ipod touches and a laptop with win7 connected fine. But I have a laptop with vista that will connect local only with no internet. Went live chat with cisco and no result. I get the 82 code even after I try a quick key. It says "An HNAP call to the device failed because the HTTP connection was broken". I have resarted router and laptop. All other devices work fine and have no problem connecting on this router.
View 3 Replies
View Related
Apr 25, 2012
i need to know that how can i make vlans in Linksys SRW224G4 Layer 2 manageable switch , because i have 100 users network having lots of users using more then 1 ip to connect 4 different servers having different ip class pools, what i need is, i want to use only single ip pool with Class B Address like 172.16.6.0 for all network users which all connect to far end servers through layer 2 Linksys SRW224G4 manageable switch controlling to allow different IP pools ? like 172.16.1.0 / 172.16.55.0 / 172.16.99.0 and 192.168.1.0
View 1 Replies
View Related
Feb 6, 2013
I need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies
View Related
