Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed

Oct 20, 2007

When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT350N Bricked / Lost After Firmware Upgrade?

Jan 4, 2012

I tried to upgrade the firmware of my WRT350N but while upgrading  my wife switched on the oven and.... yes, power down -> the upgrade has been interrupted. Now the router is no longer responding, it  shows just the green power light on (not blinking). I tried all the resets I found googling (pressing the reset button for 30 sec, isconnecting power and reconnecting it again) but no way, there's no way to ping the router at its default address 192.168.1.1. All the leds are switched off (internet, usb, wireless, security) except the green power light.  Is there another way to have it back or it is definitely lost?

View 6 Replies View Related

Linksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2

Feb 28, 2013

just troed to update FIRMWARE re our WRT54G_v2
 
current FIRMWAREFirmware Version: v3.37.7
 
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
 
BUT got msg' Upgrade are failed!;

View 3 Replies View Related

Linksys Wireless Router :: WRT54G-TM - Upgrade To New Firmware Failed

Dec 5, 2011

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading

View 3 Replies View Related

Linksys Wireless Router :: WRT54GS / Firmware 4.71.4 - Upgrade Failed?

Aug 19, 2012

The label on my router says "WRT54GS" and the current firmware is 4.71.4.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Upgrade Failed?

Feb 2, 2013

I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed

Feb 22, 2012

My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
 
 I can not upgrade, always gives the same error message: Firmware upgrade failed!

View 6 Replies View Related

TP-Link 300Mbps Wireless :: WR1042ND - Firmware Upgrade To 3-15-4 Failed

Feb 10, 2013

Region : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver

I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?

View 4 Replies View Related

Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed

Jan 8, 2013

I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G-TM / Upgrading To New Firmware Failed?

Jan 23, 2012

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Upgrade Are Failed

Jul 24, 2011

I have Firmware Version: v4.21.1  and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Failed To Upgrade

Oct 28, 2011

I've had my WRT54G for a year few now andhave the occasional problem, were I end up powering off the Modem and the WiFibox to get a connection.So having a week of I thought I should tryand update the firmware and see if this solves the problem.I have a WRT54G Ver 2.0 and am running Win7on my main machine with IE9.I Downloaded the firmware update(FW_WRT54G_4.21.4.000_20110712), and while the update was loading I got a errormessage about Update not taken, this was while the Progress bar was about 3/4through, I click OK and waited a while to see if the progress bar moved anymore, butafter 10 min nothing appear to have happen. So I powered the box offand on again.I appear to be able to see my other PC andmy NAS drive but the WiFi and the broadband connect was gone.I reconnected my PC to the Broadband andlooked for a connection, but none that I’ve found seam to work. I found a referenceto a TFTP utility, but all the links on your site appear to be dead, so I haven’tdownload it from anywhere else in case its different to your.

View 9 Replies View Related

Linksys Wireless Router :: E1000 FW - Firmware Update Failed / Router Hangs?

Mar 5, 2013

The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's

FW_E1000_2.1.02.006_US_20130115.bin
 
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.

View 3 Replies View Related

D-Link DIR-655 :: Boot Failure After Failed Firmware Upgrade Through Chrome

Feb 12, 2011

I've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting 192.168.0.1 to make it back. Amber light is just blinking on Power lamp.

View 2 Replies View Related

D-Link DIR-655 :: A4 1.32NA Will Not Upgrade Firmware / Upload Failed Error

Dec 25, 2011

first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:

View 6 Replies View Related

Cisco Switches :: SRW248G4 Firmware Upgrade Failed / Cannot Restore

Dec 12, 2012

with TFTP upgrade SRW2xxG4_FW_1.2.3.0.ros and WEB interface after the restart, the switch will not start, display HyperTerminal link. You can also restore the switches do not?

View 1 Replies View Related

Cisco Routers :: RV220W - Upgrade To 1.0.4.17 Failed Due To Invalid / Corrupted Firmware

Mar 10, 2013

I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
 
I found this article: [URL]
 
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
 
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0?  I'm trying to avoid configuring the router manually all over again. 

View 1 Replies View Related

Linksys Wireless Router :: Firmware Upgrade For WRT54GS V2.1?

Mar 25, 2007

I would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?

View 3 Replies View Related

Linksys Wireless Router :: E1200 Firmware Won't Upgrade

Aug 4, 2012

I just purchased a new E1200 router with firmware version 2.0.01 and downloaded the latest version 2.0.03 and tried to install it through the router. When I choose the downloaded file and try to start upgrade I immediately get an error "The Image File is Incorrect". I redownloaded it and tried again with the same error. how to get past this and upgrade the firmware? 

View 9 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: E4200v2 Firmware Upgrade

Feb 24, 2013

 I tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset  to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Firmware Can't Upgrade

Apr 17, 2013

[code]...
 
This is new EA6500 and The firsttime Setup My EA6500,Download New Ver Linksys Smart Wi-Fi Router Setup,he say Your router was not successfully set up.

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: WRT110 Firmware Upgrade?

Jul 27, 2008

I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".

View 9 Replies View Related

Linksys Wireless Router :: Upgrade WRT160n To Firmware V3.0.03?

Jul 31, 2011

I had issues with my router incorrectly resolving URLs. For example, going to facebook.com would gtive me a "wiki does not exist" message. Pinging facebook.com would give me an IP that belongs to wikipedia. The answer was SUPPOSED to be upgrading to v3.0.03.I upgraded and now my router WILL NOT connect to my DSL modem. Oh, it says it's connected and shows the correct IP address for my DSL modem but the gateway is showing 0.0.0.0. Direct connection to my PC works just fine.I have cycled the power on both the router and the DSL modem several times. The DSL modem is working just fine. I have done several IP release/renew on the router. I have reset the router. To no avail. This firmware update (which completed successfully) seems to have killed my routers ability to communitcate with the internet.

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Firmware Won't Upgrade?

Jan 1, 2013

When I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)

View 3 Replies View Related

Linksys Wireless Router :: Can't Upgrade WRT300N V2.0 With Old Firmware

Jun 16, 2011

PS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?

View 9 Replies View Related

Linksys Wireless Router :: Cannot Upgrade Firmware To WRT54G V5

Dec 22, 2011

My Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab

View 2 Replies View Related

Linksys Wireless Router :: WRT54G / How To Upgrade Firmware

Feb 10, 2012

I am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g First Firmware Upgrade Went Bad

Aug 24, 2012

I have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle.  Checked the information again and everything on the router setup completely disappeared.  

View 8 Replies View Related

Linksys Wireless Router :: Firmware Upgrade For WRK54G

Jan 9, 2012

There is no “firmware” number after the model and I believe this router has never had a firmware upgrade. However, if I try to download any of the 3 upgrades from the Linksys support site I get the message “firmware not available, sorry for the inconvenience.” Since the suggested solutions to so many problems posted in the forum is to first upgrade the firmware, I find this response with no explanation quite annoying. I am having problems replacing my current hardwired Linksys two port router with the WRK54G wireless 4-port router. Questions regarding that problem I will post under a different topic. For now, how I can get the firmware upgrade for the WRK54G?

View 5 Replies View Related

Linksys Wireless Router :: WRT350N - Workgroup PC

Jun 10, 2009

I have a wrt350n at home and it works fine but it has only one little issue. When I connect my lap wireless I cant see the other work group pcs but if I wire the laptop there is no problem. I use ip to share files and not net bios but sometimes it would be great to find all the pcs on the work group easily and not memorize all the ips.
 
Disabled firewalls, updated firmware, tried to change network ip... nothing solved. Have no problems at work with an WRT54G.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved