Linksys Wireless Router :: E4200v2 Firmware Upgrade

Feb 24, 2013

 I tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset  to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200v2 Firmware Upgrade Fails?

Nov 24, 2012

I'm trying to upgrade my frmware to the lastest one (classic firmware) I've downloaded this file multiple times [URL] When I try the firmware upgrade (manual upgrade) and select the file, it always complains about the file being corrupt (using the .ssa file in the zip).

View 6 Replies View Related

Linksys Wireless Router :: E4200V2 Manual Download And Firmware Upgrade

Jun 6, 2012

I have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?

View 6 Replies View Related

Linksys Wireless Router :: E4200V2 Firmware Is Not Available As A Download

Dec 14, 2011

V2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install.  This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version:  v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 - How To Download 2.0.36 Firmware

Jan 23, 2012

Where can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 Firmware Update To 2.0.37.131047

Nov 8, 2012

I just purchased 3 E4200v2 routers. As I am prepping them to install, I am attempting to update the firmware from 2.0.26 -> 2.0.37.  I downloaded the zip file from the Cisco support site and when unzipped the file is named FW_E4200_2.0.37.131047.SSA. When I attempt to do a manual update from the Admin page, I imediately get an image file is incorrect error. 
 
I've downloaded the file a total of three times on 2 separate networks and have tried three different browsers to attempt the update, all with the same error. The support chat sessions have proven worthless, they seem very scripted and the last one kept trying to sell me a support contract... 
 
I want to stay with the Classic firmware, even though it is lacking current bug fixes. Does anyone have a "good" copy of the 131047 firmware? It appears to me that the one on the Cisco site is broken.

View 2 Replies View Related

Linksys Wireless Router :: E4200v2 - CCC Firmware Empty File

Jul 26, 2012

Cisco keeps struggling with CCC firmware files.

Now the download link for E4200v2 CCC is available, but gives you an empty zip file (0 bytes). Quality Control is an unknown word at Cisco.

The file is no longer empty.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 / E4200v2 - Is Classic Firmware 2.0.37 Vulnerable

Apr 12, 2013

Is classic firmware 2.0.37 for the EA4500/E4200v2 vulnerable? I see that the workaround is to use the latest Smart Wifi firmware. How soon can we expect to see a classic firmware update? [URL] Linksys quote taken from a random review that I found on Amazon below......The manufacturer commented on this review(What's this?) Posted on Jul 26, 2012 9:53:51 AM PDT Linksys says: (MANUFACTURER) Jason, Cisco Linksys plans to offer Software Updates to the EA Series router for customers who choose a local management option (including Cisco Connect/Classic). We will continue to provide Customer Care and deliver SW Updates to address Security, Critical Bugs and User Interface issues as required. Customers can comfortably stay with the local management option and Cisco will deliver continued support.

View 9 Replies View Related

Linksys Wireless Router :: Firmware Upgrade For WRT54GS V2.1?

Mar 25, 2007

I would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?

View 3 Replies View Related

Linksys Wireless Router :: E1200 Firmware Won't Upgrade

Aug 4, 2012

I just purchased a new E1200 router with firmware version 2.0.01 and downloaded the latest version 2.0.03 and tried to install it through the router. When I choose the downloaded file and try to start upgrade I immediately get an error "The Image File is Incorrect". I redownloaded it and tried again with the same error. how to get past this and upgrade the firmware? 

View 9 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Firmware Can't Upgrade

Apr 17, 2013

[code]...
 
This is new EA6500 and The firsttime Setup My EA6500,Download New Ver Linksys Smart Wi-Fi Router Setup,he say Your router was not successfully set up.

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: WRT110 Firmware Upgrade?

Jul 27, 2008

I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".

View 9 Replies View Related

Linksys Wireless Router :: Upgrade WRT160n To Firmware V3.0.03?

Jul 31, 2011

I had issues with my router incorrectly resolving URLs. For example, going to facebook.com would gtive me a "wiki does not exist" message. Pinging facebook.com would give me an IP that belongs to wikipedia. The answer was SUPPOSED to be upgrading to v3.0.03.I upgraded and now my router WILL NOT connect to my DSL modem. Oh, it says it's connected and shows the correct IP address for my DSL modem but the gateway is showing 0.0.0.0. Direct connection to my PC works just fine.I have cycled the power on both the router and the DSL modem several times. The DSL modem is working just fine. I have done several IP release/renew on the router. I have reset the router. To no avail. This firmware update (which completed successfully) seems to have killed my routers ability to communitcate with the internet.

View 4 Replies View Related

Linksys Wireless Router :: EA4500 Firmware Won't Upgrade?

Jan 1, 2013

When I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)

View 3 Replies View Related

Linksys Wireless Router :: Can't Upgrade WRT300N V2.0 With Old Firmware

Jun 16, 2011

PS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?

View 9 Replies View Related

Linksys Wireless Router :: Cannot Upgrade Firmware To WRT54G V5

Dec 22, 2011

My Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab

View 2 Replies View Related

Linksys Wireless Router :: WRT54G / How To Upgrade Firmware

Feb 10, 2012

I am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g First Firmware Upgrade Went Bad

Aug 24, 2012

I have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle.  Checked the information again and everything on the router setup completely disappeared.  

View 8 Replies View Related

Linksys Wireless Router :: Firmware Upgrade For WRK54G

Jan 9, 2012

There is no “firmware” number after the model and I believe this router has never had a firmware upgrade. However, if I try to download any of the 3 upgrades from the Linksys support site I get the message “firmware not available, sorry for the inconvenience.” Since the suggested solutions to so many problems posted in the forum is to first upgrade the firmware, I find this response with no explanation quite annoying. I am having problems replacing my current hardwired Linksys two port router with the WRK54G wireless 4-port router. Questions regarding that problem I will post under a different topic. For now, how I can get the firmware upgrade for the WRK54G?

View 5 Replies View Related

Linksys Wireless Router :: WRT54G V1 Firmware Upgrade Failure

Mar 10, 2013

I have tried to upgrade the firmware to the latest greatest but keep getting the "Incorrect image file" error.  I bought two of the V1 units and had no trouble with one of them but the other is frustrating me.  I have reset it and even tried a tftp upgrade of the firmware but still get "Incorrect image file" even in tftp.

View 1 Replies View Related

Linksys Wireless Router :: WRT56G Firmware Upgrade Fails?

Jan 8, 2013

Having problems losing connectivity so decided to upgrade firmware from v1.00.7 to latest version available.
 
Downloaded the upgrade file and log into web based administrator.  Select file and click on UPGRADE button.  A couple of clicks on timeline then: UGRADE FAILED

View 5 Replies View Related

Linksys Wireless Router :: E3000 - Firmware Upgrade Error

Aug 24, 2012

I have an E3000 with firmware v. 1.0.01 build 6.  I am trying to upgrade to the latest firmware version.  I downloaded the file, and when I went to install from the web page I got the error message:  Not enough memory available. I tried from 2 computers and got the same message. 

View 6 Replies View Related

Linksys Wireless Router :: Unable To Upgrade Firmware Of WRT120N

Jan 22, 2012

Firmware downloaded, FW_WRT120N_1.0.06.001_US after pressing APPLY nothing happens after few minutes it says. "There is an error in the Content-type  field.  Click the Back button to return to the previous page and re-enter the information."

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Died After Firmware Upgrade?

Nov 24, 2011

I have an old wrt54g (version 2) which I just downloaded and installed the latest firmware (4.21.4) and now its dead!!!!
 
factory reset does nothing, cannot connect via a wired connection, nothing.  All the lights work fine.

View 4 Replies View Related

Linksys Wireless Router :: E3000 Firmware Upgrade Failure

Sep 14, 2010

I was prompted by Cisco Connect to upgrade the router software.  During this process it came back and said the update failed.  At this time the network connection dropped.  The power light is now flashing on the device. 

View 9 Replies View Related

Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed

Oct 20, 2007

When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.

View 4 Replies View Related

Linksys Wireless Router :: E1200 Firmware Upgrade Fails?

Apr 13, 2012

I am trying to upgrade the firmware on my Linksys v1 router from 1.0.02 to 1.0.03 over a remote 56Kb circuit. I appear to be having a timeout problem.  The upgrade always fails.  I have upgraded several E1200s in my office over ethernet, and the upgrade appears to finish when the progress bar is at 15%.  However, on my remote upgrade, the progress bar gets to 98%, hangs for a few more seconds, and then pops up a window with "Upgrade failed".
 
I suspect that there is a timeout on the upgrade process, and that I can't upload the 3.8 MB firmware file fast enough.  If so, is there any way to increase the upgrade timeout?

View 2 Replies View Related

Linksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2

Feb 28, 2013

just troed to update FIRMWARE re our WRT54G_v2
 
current FIRMWAREFirmware Version: v3.37.7
 
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
 
BUT got msg' Upgrade are failed!;

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Locked Out After Firmware Upgrade?

Jul 19, 2011

I ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings.  When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.

View 3 Replies View Related

Linksys Cable / DSL :: WAG354G Wireless Router - Upgrade Firmware On It

Nov 16, 2007

I have WAG354G wireless router and would like to upgrade the firmware on it, I believe it is version 1.There's two firmware downloads to choose from: Annex A and Annex B.What is the difference between the two?

View 9 Replies View Related

Linksys Wireless Router :: Upgrade Fails For E3000 Firmware 1.0.04

May 25, 2012

I have tried repeatedly to upgrade my firmware from 1.0.03 to 1.0.04, but it always fails with a message :cannot upgrade at this time..."  I've tried both IE and FireFox, and both wired and wireless connection to my PC (Windows 7).

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved