The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).
View 2 RepliesI currently have Model name: Linksys E4200 Firmware version: 1.0.04 build 11 Software version: 1.4.12100.0
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.
I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option). I was in the process of setting it up when it wanted to do a Router Update. Unfortunately, it did not specifically say to not do it WIRELESS. We had a disconnection in the upgrade process. Now the Power light just blinks. I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site). Also Cisco Connect cannot connect to the router.
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router. I do not get any different results.
automatic firmware upgrade my E4200 can no longer be accessed.
View 6 Replies View RelatedThere is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?
View 1 Replies View RelatedI was looking for alternative firmwares until Linksys fixes their broken device.What do you guys make of this Tomato firmware? Do you think it has usb drive and Media Streaming (Twonky) support?
View 2 Replies View RelatedNom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.
View 4 Replies View Relatedis it worth it? I still cant stream some of my higher quality 6+gb .mpg video files with the v1 with the .03 firmware. I notice the v2 says faster or better HD video. [URL]
View 5 Replies View Relatedlink to the original v1.0.0 firmware for the E4200. That was the best firmware for me and sadly I can't find a link to go back. v1.0.0 really had no problems for me. I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want. v1.0.2 broke my YouTube and Netflix streaming. So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured. (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)
I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.
View 2 Replies View RelatedI cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.
I've tried to upgrade/downgrade process twice with the same result. After few days without any issue 2.1.39.145204 gets stuck (=routing to internet doesn't work although I can ping from wireless network to all LAN IPs) and I need to reboot the router.
I have about 7 devices. Guest network is disabled, parental control is disabled, USB is not used, DHCP service is used, WPA2 mixed personal mode is used, MAC filtering is disabled, DMZ is disabled, DDNS is disabled, port triggering is not used. All the rest of settings are in default values.
As far as I notied the previous version 2.1.39.144146 doesn't get stuck at all.
I am unable to connect both of my smart phones to the access point. I am using WPA2 encryption on the AP. I can connect my phones to other AP's using WPA2. I have other devices that connect to the AP except my Android phones. I would like to be able to get some debug logs except the web interface says that the logging fictions are disabled when in bridge mode. Cisco/Linksys tech support: Any troubleshooting tips other than resetting the access point and or reflashing it.
View 4 Replies View RelatedI've assigned an ip address to my htpc using dhcp reservation. On my old router I could use the client name, for instance: ssh name@clientName Instead of: ssh name@ipAddress Currently I cannot do this with the stock cisco firmware (unless I'm mistaken). Is there something I have to do to get it working? Or do I have to resort to tomatoUSB/WRT.
View 1 Replies View RelatedI would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?
View 3 Replies View RelatedI just purchased a new E1200 router with firmware version 2.0.01 and downloaded the latest version 2.0.03 and tried to install it through the router. When I choose the downloaded file and try to start upgrade I immediately get an error "The Image File is Incorrect". I redownloaded it and tried again with the same error. how to get past this and upgrade the firmware?
View 9 Replies View RelatedI tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?
View 9 Replies View Related[code]...
This is new EA6500 and The firsttime Setup My EA6500，Download New Ver Linksys Smart Wi-Fi Router Setup,he say Your router was not successfully set up.
I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
View 9 Replies View RelatedI had issues with my router incorrectly resolving URLs. For example, going to facebook.com would gtive me a "wiki does not exist" message. Pinging facebook.com would give me an IP that belongs to wikipedia. The answer was SUPPOSED to be upgrading to v3.0.03.I upgraded and now my router WILL NOT connect to my DSL modem. Oh, it says it's connected and shows the correct IP address for my DSL modem but the gateway is showing 0.0.0.0. Direct connection to my PC works just fine.I have cycled the power on both the router and the DSL modem several times. The DSL modem is working just fine. I have done several IP release/renew on the router. I have reset the router. To no avail. This firmware update (which completed successfully) seems to have killed my routers ability to communitcate with the internet.
View 4 Replies View RelatedWhen I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)
View 3 Replies View RelatedPS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?
View 9 Replies View RelatedMy Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab
View 2 Replies View RelatedI am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?
View 2 Replies View RelatedI have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle. Checked the information again and everything on the router setup completely disappeared.
View 8 Replies View RelatedThere is no “firmware” number after the model and I believe this router has never had a firmware upgrade. However, if I try to download any of the 3 upgrades from the Linksys support site I get the message “firmware not available, sorry for the inconvenience.” Since the suggested solutions to so many problems posted in the forum is to first upgrade the firmware, I find this response with no explanation quite annoying. I am having problems replacing my current hardwired Linksys two port router with the WRK54G wireless 4-port router. Questions regarding that problem I will post under a different topic. For now, how I can get the firmware upgrade for the WRK54G?
View 5 Replies View RelatedI downloaded the firmware from the Linksys site. I'm using IE v9 on a Win7 Pro x32. I'm using the E4200 as an access point so DHCP is disabled, no cable in the WAN port.
I uploaded the firmware but it seems to be stuck for 30 minutes at 98%. I read some threads saying it takes a while, but I'm not sure if it is locked up. The screen says not to interrupt the process so I don't want to reboot/reset and brick the router.
After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.
View 6 Replies View RelatedThe device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies View RelatedIt is the router Cisco Linksys E4200.
My situation before I bought the router:
- my Internet speed is 120/20 (Mbps download / Mbps upload)
- speed test with my ISP gives 125/20 for 99% of the tests- speed test with [URL] gives 125/20 for 99% of the tests
- I never have had a router; my PC is connected directly to the cable modem
- My ISP is Vidéotron from Quebec in Canada : [URL]
My new situation with the new router :
- last Tuesday, I bought the router Cisco Linksys E4200
- the installation went fine and Internet works well
- during the installation process, the firmware is upgraded to 1.0.03
- speed test with my ISP gives 100/20 for 99% of the tests
- speed test with [URL] gives 100/20 for 99% of the tests
My observations :
- according to router status port, Internet port is 1 Gbps
- according to router status port, port 1 (where my PC is connected) is 1 Gbps
- it seems that speed cannot get more than 100/20 with the new router
- when I disconnect the router and I reconnect my PC directly to the modem cable, I still get 125/20
Calling Cisco support :
- Many tests are done during 3 chat sessions
- The speed is still 100/20
- The recommendation is to replace the router with a new one
Friend support :
- A friend of mine brought his router which is the same as mine- The speed is still 100/20 with his router
New router :
- As recommended by Cisco support, I got the router replaced from the store.
- I installed the new router
- During the installation process, the firmware is not upgraded; the firmware is 1.0.01
- The speed is now 125/20
- I upgraded the firmware to 1.0.03
- The speed is now 120/20
- I downgraded the firmware to 1.0.01
- The speed is now 125/20
Conclusion :
- My speed is maximized at 100/20 with the firmware 1.0.03
- I will stay with firmware 1.0.01 until firmware1.0.03 is corrected.
I have an E4200 router with 3 WET610N access points. I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away. Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop. A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152. Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.
I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2. The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless. This only happened since the firmware update. And this equipment was working fine before this. Is there a way I can restore the previous version of firmware?
This firmware bad, because my sync program, can't set create date of files on external usb storage connected to router, on 1.0.04 - all good.
View 5 Replies View Related